Description :
Tenders for P/f Road Safety Item On Road Between Sector-62 & 63 From Model Town To Underpass Sector-71, Noida. - Reflective Raised Pavement Markers (cat Eye/road Stud) Supply And Fixing Of Raised Pavement Marker With Made Of Plastic Body Of Rpm/ Road Stud Shall Be Moulded From Asa (acrylic Styrene Acrylonitrite) Or Hips (high-imoact Polystyrene) Or Acryloniitrite Butadien Styrene (abs)or Any Other Suitable Material Approved By The Engineer. The Marker Shall Support A Load Of 13,635 Kg Tested In Accordance With Astm D4280.the Reflective Panels Shall Consist Of Number Of Lenses Contatning Single Or Dual Prismatic Cubes Capable Of Providing Total Internal Reflection Of The Light Entring The Lens Face. Lenses Shall Be Mouled Of Methyl Methecrylate Conforming To Astm D788 Of Equivalent. The Slop Or Retro-reflecting Surface Shall Preferably Be 35+/-5 Degree To Base And The Area Of Each Retro -reflecting Surface Shall Not Be Less Than 13.00 Sq.cm. The Marker Height Shall Not Be Less Than 10 Mm And Shall Not Exceed 20 Mm & Width Shall Not Exceed 130 Mm., The Base Of The Marker Shall Be Flat Within 1.3 Mm All Road Studs Shall Be Legibly Marked With The Name , Trade Or Other Means Of Identification Of The Manufacture. Epoxy Installations, Excess Adhesive Around The Edge Of The Marker, Excess Adhesive On The Pavement And Adhesive On The Exposed Surfaces Of The Markers Shall Be Immediately Removed. The Contractor Shall Submit A Two Year Warranty For Satisfactory Field Performance Including Stipulated Retro-reflectance Of The Reflecting Panel , To The Engineer . In Addition , A Two Year Warranty For Satisfactory Infield Performance Of The Finished Road Marker Shall Also Be Given By The Contractor Who Carries Out The Work Of Fixing Of Reflective Road Markers. In Case The Markers Are Displaced , Damaged , Get Worn Out Or Lose Their Reflectivity Compared To Stipulated Standards , The Contractor Would Be Required To Replace All Such Markers Within 15 Days Of The Intimation From The Engineer , At His Own Cost. The Rate Shall Include All Materials, Labour, T&p, Transportation, Installation And Incidentals All Complete As Per Direction Of The Engineer-in-charge. Rpm (with Shank) Uppwd Sor:-morth-804 (8.35)-suggestiv, Flexible Median Marker As Per Irc 79:20:19 Flexible Median Marker (fmm) Should Be Used For Improving Median Visibility During Dark Hours. Use Of Median Marker Provides Safety Against Collision Happening With Medians During Night Time, Or Serve Whether. Flexible Median Markers Shall Be Provided With Fluorescent Yellow Colour Retro Reflective Sheeting Type Xi As Per Irc 67, Flexible Median Marker Shall Be Of Tough High Impact Resistant Injection Molded Thermoplastic Body With Property Of Flexibility To Provide High Durability And U Shape Structure Having Rebound, Bounce Back Property The Sheeting Shall Be Type Xi Confirming To Irc 67 And It Should Be Own Both The Faces Whereby Providing Maximum Reflectivity At I, Anger Distance With Adequate Durability The Logo Of The Manufacturer Shall Be Embossed On Either Side Of The Body During The Injection Molding Process Fmm Shall Be Fixed By A Combinitation Of Apoxy Adhesive And Grouting Drilling On Concrete Median Of Properly Constructed Solid Medians. Height. The Marker Height Shall Be A Median Of 180mm, Width 120mm And Body Thickness 6.5mm, The Shanks Shall Not Be Less Than 20mm And Depth Shall Not Be Less Than 30mm Reflective Area Shall Not Be Less Than 90cm Square Proof Of The Same Report Shall Be Uploaded Which Quoting Tender., The Body Of Fmm Shall Bounce Back To Its Original Position Of After 750 Number Of Hits Using Pendulum Of 1.8 Kg Confirming 40 Astm D256 Adhesion Between The Body And Outer Casing Body Of Fmm Shall With Stand 50kg. Tensile Loads Confirming To Astm D638 Method, The Rate Shall Be Include All Materials,labours, T&p Transportation Installation And Incidentals All Complete As Per Direction Of The Engineer-in-charge ., Solar Power Road Marker (solar Studs) The Solar S
