Description :
Tenders for Enquiry For Supply Of Material - Computer Items :, Tripping Coil 30 Volts Dc, Copper Wire, Shunt Suitable For Bhel With Assemblyspecification: Operating Voltage : 30v Dc Coil Resistance : 4.8 0.1 Ohms Bobbin- Outer Diameter : 42mm Inner Diameter : 16mm (with Brass Tube) Length: 93mm Brass Tube Length : 98 Plunger Length : 140mm Copper Wound And Varnished With 0.50 Meter Insulated Pvc 1.0 Sqmm Wire Weightz: 1) Coil : 505 Gms 2) Plunger : 126 Gms 3) Minimum Overall Weight Of Coil : 965 Gms With Nylock Style Nuts, 30 Volt Tripping Coil For Cromptonspecification:operating Voltage: 30v Dccoil Resistance: 2.6 0.1 Ohmsbobbin - Outer Diameter: 52mm, Inner Diameter: 20mm Height: 52mm, Weight Of Coil: 300gm, Tripping Coil 30 Volt Dc, Copper Wire, Shunt Suitable For Shreemspecification :operating Voltage : 30v Dccoil Resistance : 3.9 4.3 Ohmsbobbin Outer Diameter : 51mminner Diameter : 26mm Height : 51mmcopper Wound With 0.5 Meter Insulated Pvc 1.5 Sqmm Wire Minimum Overallweight Of Coil : 395 Gms, Tripping Coil 30 Volt For Abb, 11 Kv Vcbspecification:in 54450007-yd : 0.609n : 550, Tripping Coil 30 Volt For Stelmec, 11 Kv Vcb With Assemblyspecification:operating Voltage : 30v Dccoil Resistance : 3.1 0.1 Ohmsmake : Sunkid/rabcosingle, Metal Enclosed Coil Unit, Tripping Coil 30 Dc Volt For Schneider, 11 Kv Vcbspecification:operating Voltage : 18-26v Dcmodal : Og835coil Resistance : 8.7 0.1 Ohmscoil Bobbin Outer Diameter : 46mminner Diameter : 16mm Length : 40mmcopper Wound And Varnishedwith 0.50 Meter Insulated Pvc 1.0 Sqmm Wire Weight : 1) Coil : 225 Gms, 30 Volt Tripping Coil Megawin 525 Gm With Assemblyspecification : Operating Voltage : 30v Dccoil Resistance : 4.8 0.1 Ohmsbobbin - Outer Diameter : 42mminner Diameter : 16mm (with Brass Tube)length : 93mm, Brass Tube Length : 98plunger Length : 140mm, Copper Wound And Varnishedwith 0.50, Meter Insulated Pvc 1.0 Sqmm Wireweight :1) Coil : 505gm, 2) Plunger : 126 Gm 3) Minimum Overall Weight Of Coil : 965 Gm With Nylock Style Nuts, Capacitor Bank Do Fuse (t-40), Teflon Tape, Pvc Tape (make: Steelgrip/anchor Or Equivalent), M Seal, Cone Washer 12mm, 16mm, 20mm, Mobil Oil, Wd 40, Grease, Hack Saw Blade :- 12 (double Side)make:- Sharp, Silica Gelsilica Gel Required For Power & Distribution Transformer Shall Be Conforming To Iss 3401/1992 With Its Latest Amendments.the Material Shall Be Solid With Grainy Porous Structure Free From Extraneous Impurities. The Indicating Type Gel Should Be Odorless. Non-toxic & Non Corrosive With Stable Chemical And Thermal Characteristics. The Inter Connected Pores From A Vast Surface Area;silica Gel Should Absorb Moisture 40% Or More Of Its Weight At 100% Humidity.bulk Density: The Bulk Density Of The Material Shall Be More Than 0.6gm./ml.particle Size & Colour: The Material Shall Be Blue In Colour And Its Size Should Be From 9 To 12mm.loss On Drying: The Material When Tested According To The Method Prescribed In Iss Shall Not Lose More Than 5% Of Its Mass.absorption Capacity: The Material When Tested According To The Method Prescribed In Iss 3401-1992 Shall Absorb Minimum 27% Of Moisture On The Basis Of Its Mass.ph Value: The Ph Of Aqueous Extract Of The Material When Determined By The Method Prescribed In Iss 3401-1992 Shall Not Be More Then 8 And Not Less Then 3.5.loss On Attrition: When Subjected To The Test According To The Method Prescribed In Aforesaid Iss Not More Than 2.5% Of The Material Shall Pass Through The Sieve.chemical Requirement: The Gel Shall Also Comply With The Requirement Prescribed In The Iss 3401-1992, Cutting Pliers, Nose Plier, Nut Bolt M6, Nut Bolt M8, Nut Bolt M9, Nut Bolt M10, Nut Bolt M12, Hole Saw Cutter 20mm, Sand Paper
