Description :
Tenders for Supply For Dual Desk In Model School - Dual Desk, The Product Should Be In Complete Knock Down Structure As Much As Possible/feasible Enabling Ease In Transportation And Assemblies Within Classrooms.the Panels Are Made From 18 0.5mm Thk Pre-laminated Mdf ( Is 14587) With 2 Mm Pvc Edge Banding On All Sides.top Dimension Shall Be 1048 X 378mm. Top Height Shall Be 750mm. Seat Dimension Shall Be 1048 X 335mm. Seat Height Shall Be 437mm. Back Dimensions Shall Be 1048 X 265mm. Size May Vary +/- 5mm. The Under Structure Is Made Of Erw Tubes[is 7138] 25.4 0.3mm X 25.4 0.3mm X1.2 0.096mm Thk Powder Coated 50microns( 10) At Base Which Are Welded To The Desk And Seat Supports That Are Made Of Ms C Sections 29+/-0.3mm X 24.9+/-0.3mm X 1.2+/-0.096mm Thick Powder Coated 50microns ( 10). Stiffeners That Are Provided Between The 2 Vertical Frames At Base And Back Of Seat Are Made From Erw Tubes[is 7138] 25.4 0.3mm X 25.4 0.3mm X1.2 0.096mm Thk Powder Coated 50microns ( 10). The Tubes Are Closed With Plastic Caps. Additional Horizontal Supports Of Erw Tubes[is 7138] 25.4 0.3mm X 25.4 0.3mm X1.2 0.096mm Thk Powder Coated 50microns ( 10) Are Placed Between Front Legs And Between Back Legs To Add The Rigidity Of The Structure. The Storage Shelves Are Made From 0.6 0.09mm Thk Powder Coated 50microns( 10) Ms Sheet Which Is Affixed Below The Desk Top. Hooks Are Provided On Either Sides Of The Vertical Frame Of The Desk, For Hanging Bags/bottles. They Are Made From 6.0 Mm Dia Ms Rods Powder Coated 50microns ( 10) The Under Structure Is Assembled Using M5 Trilobulartaptite Screws. Nylon Studs Are Provided On Bottom Side Of Rh/lh Frame. All Fabricated Parts Which Require Welding Are Mig / Spot Welded. The Screw Joining Wooden Panels To Under Structure Are Chip Board Screws. All Steel Structural Components Shall Be Made From Virgin Material And Tested Conforming To Is: 513/ Is: 10748/ Is: 2062/ Is: 7138. Recycled Steel Will Not Be Accepted. Top Understructure 960mm (w) X 310mm(d). Back Panel Support 960mm(w) X 325mm(h). Seat Support 960mm(w) X 280mm(d). 3d View Is As Under:-
