Description :
Tenders for Rrsmp/25-26 Barsoi/02 - Dhalai Churi More To Budha Kamat, Clearing And Grubbing Road Land (by Manual Means)clearing And Grubbing Road Land Including Uprooting Wild Vegetation, Grass, Bushes, Shrubs, Saplings And Trees Of Girth Upto 300 Mm, Removal Of Stumps Of Such Trees Cut Earlier And Disposal Of Unserviceable Materials And Stacking Of Serviceable Material To Be Used Or Auctioned, Upto A Lead Of 1000 M Including Removal And Disposal Of Top Organic Soil Not Exceeding 150 Mm In Thickness As Per Technical Specification Clause 201., Excavation In Soil Using Hydraulic Excavator And Tippers With Disposal Upto 1000 Mexcavation For Roadwork In Soil With Hydraulic Excavator Of 0.9 Cum Bucket Capacity Including Cutting And Loading In Tippers, Trimming Bottom And Side Slopes, In Accordance With Requirements Of Lines, Grades And Cross-sections, And Transporting To The Embankment Location With A Lift Upto 1.5 M And Lead Upto 1000 M As Per Technical Specification Clause 302.3, Construction Of Embankment With Approved Material Obtained From Borrow Pits With A Lift Upto 1.5 M, Transporting To Site, Spreading, Grading To Required Slope And Compacting To Meet Requirement Of Tables 300.1 And 300.2 With A Lead Upto 1000 M As Per Technical Specification Clause 301.5, Construction Of Subgrade & Earthen Shoulderconstruction Of Subgrade And Earthen Shoulders With Approved Material Obtained From Borrow Pits With All Lifts And Leads, Transporting To Site, Spreading, Grading To Required Slope And Compacted To Meet Requirement Of Table 300.2 With Lead Upto 1000 M As Per Technical Specification Clause 303.1., Granular Sub-base With Well Graded Material (table 400.1)construction Of Granular Sub-base By Providing Well Graded Material (crushed Stone Aggregates And Local Sand), Spreading In Uniform Layers With Motor Grader On Prepared Surface, Mixing By Mix In Place Method With Rotavator At Omc, And Compacting With Three Wheel 80-100 Kn Static Roller Capacity To Achieve The Desired Density, Complete As Per Technical Specification Clause 401, ( By Mix In Place Method ) For Grading Ii Material, Wbm Grading 3providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With Smooth Wheel Roller 80-100 Kn In Stages To Proper Grade And Camber, Applying And Brooming, Stone Screening To Fill-up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 3 As Per Technical Specification Clause 405., A (by Manual Means ), Cement Concrete/panel Concrete Pavementconstruction Of Un-reinforced, Dowel Jointed, Plain Cement Concrete Pavement Over A Prepared Sub Base With Approved Grade Cement @ 400 Kg Per Cum, Coarse And Fine Aggregate Conforming To Is 383 As Per Actual Design Mix, Processing 28 Days Minimum Compressive Strength Of 35 (thirty Five) Mpa And Minimum Flexural Strength Of 4.5 (four Point Five) Mpa, Maximum Size Of Coarse Aggregate Not Exceeding 25 Mm, Mixed In A Batching And Mixing Plant As Per Approved Mix Design, Transported To Site, Laid With A Fixed Form Or Slip Form Paver, Spread, Compacted And Finished In A Continuous Operation Including Provision Of Contraction, Expansion, Construction And Longitudinal Joints, Joint Filler, Separation Membrane, Sealant Primer, Joint Sealant, Debonding Strip, Dowel Bar, Tie Rod, Admixtures As Approved, Curing Compound, Finishing To Lines And Grades As Per Drawing., Brick Solinglaying Brick Soling Layer On Prepared Sub-grade With Brick On End Edging According To Lines, Graded And Cross-section Shown On The Drawing Filling Joints With Sand And Earth, Spreading 25 Mm Thick Layer Of Earth Over Brick Soling, Watering And Rolliing The Same With Three Wheel Road Roller 80-100 Kn As Per Technical Specification Clause 412, Reinforced Cement Concrete M15 Grade Kilometre Stone/local Stone Of Standard Design As Per Irc:8 Fixing In Position Including Painting And Printing, Etc As P
