Description :
Tenders for Construction Of Nrlm Shed In Tadasa Gp - Labour Charges For Handing Errection Of Rcc Rings Etc T, Transportation Charges Of Materials Beyond 5 Km At 10% T, Fabrication Charges Tadasa, Cost Of 6.5mm M.s. Coil Tadasa, Rcc Cap 1000 Mm Dia, 100 Mm Thick T, Trap For Tadasa, Indian Type Water Closet Of Size 580 Mm Of Specified Make With Footrests T, Add White Lead Paint, Gasket, Cement, Sand For Making Good The Wall And Floor At 2% On Material T, Lead Or Pvc Connection Pipe 32mm Dia (for Wash Basin) T, C.i. / M.s. Brackets For Flushing Cistern T, Brass Stop Cock T, Cp Brass Waste 32 Mm Of Standard Pattern T, Cp Brass Chain With Plug T, Copper Plated Brass Piller Tap 15mm T, White Vitreous China Clay Flat Back Wash Basin Size 550x400mm T, Handling Loading And Unloading 3% On Material T, Labour Charges For Lifting And Placing In Position And Making Connection At 7% On Material T, Polyenthylene Water Storage Tank Of Specified Capacity L T, Pvc Pipe Of 10kgcum,110 Mm T, Pvc Pipes T, Pvc Pipe Of 4kgpercum,75 Mm T, Polythylene Pipes High Density 32mm External Dia T, Add 5% For Fittings And Wastage Charges T, Licenced Plumber With Tools T, Add Cement Sand And Grit 1% On Material T, Mathi/nandi Wood Planks For Panels 25 Mm Thick T, Hom Of Machinaries For Planing T, Add Cutting And Other Wastage 5% T, Honnewood Planks For Panels 20 Mm Thick Tadasa, Honne Wood Tadasa, Unit Cost As Per The Specification T, Add Brush At 1% On Cost Of Paint T, Enamel Metal Paint T, Add Handling , Loading And Unloading At 2% On Material T, Add Wire Brush, Fine Steel Wool, Putty, Sand Paper, At 3% On Cost Of Paint T, Ready Mix Primer Paint (ready Mix Red Lead Paint) T, Add Hom Of Welding And Grinding Machine At4% On Material T, Welder Grade I T, Fitter Claass T, Ms Flat T, M.s Rods T, Add Hom Of Welding And Grinding Machine At2% On Material T, Fabricator T, Five Point Five Zero Mm Thick Plain Glass, Chrominum Plated Screws T, Cleat Angles T, Alluminium Handles - 15 Mm T, Alluminium Tower Bolt - 20 Cm T, Pvc Edge Beading T, Rubber Beading For Shutters Beading T, Nylon Rollers T, Aluminium Window Frame Section 1.20 Mm Thick T, Lime T, Painter Class I T, Add Brush, Putty, Sand Paper, Roller At 5% On Cost Of Paint T, Plastic Emulsion Paint Tadasa, Vitrified Tiles 600x600 Mm T, White Cement T, Ceramic Tiles 30 X 30 Cms T, Add Sundries Charges At 2 % On Material T, Add Handling , Loading And Unloading At 1% On Material T, Casurina Poles 100 - 150 Mm T, Mason Class I (with Tools) T, Solid Concrete Blocks (40into20into20 Cms)-5.00 N/sqmm T, Add Providing And Removing Scaffolding At 3% On Labour T, Formwork, Centering & Scaffolding For Chejjas, Canopy & Other Architectural Projections Of Minor Sections T, Formwork, Centering & Scaffolding For Columns & Piers T, Centering,scaffolding For Beams T, Formwork, Centering & Scaffolding For Roof Slab T, Mixer (concrete Small Used In Culvert) Tadasa, Boulders Tadasa, Bond Stone 20 X 20 X 45 Cm Tadasa, Size Stone 20 X 20 X 25 Cms Tadasa, Broken Stone Aggregate 40 Mm Size Tadasa, Add Watering Charges At 1 % On Material Tadasa, Hom Of Vibrator 0.71 Days Tadasa, Mixer (concrete) - 1 Cum Capacity Tadasa, Plasticizer / Super Plasticizer Tadasa, Portland Cement Tadasa, Coarse Sand (zone Iii) Tadasa, Broken Stone Aggregate 12 Mm To 10 Mm Size Tadasa, Broken Stone Aggregate 20 Mm Size Tadasa, Add Watering Charges At 1 % On Labour Tadasa, Add Sundries Charges At 1 % On Labour Tadasa, Over Head & Other Miscellaneous Charges Tadasa, Add Sundries Charges At 1 % On Material Tadasa, Binding Wire Tadasa, Tmt Bars Fe 500 Tadasa
