Description :
Tenders for 04-nagar Parishad Me Vidhyut Samagri Supply Karne Ka Karya Dist. Pratapgarh - As Per Ruidp Sor 2023, Supplying And Drawing Fr Pvc Insulated & Unsheathed Flexible Copper Conductor As Per Pwd Specification For Electrical Works With Isi Marked (is:694) And As Per Is 8130 : 2013 Of 1.1 Kv Grade . Wire Should Be Made From 99.90 % Purity Copper, Class 5 Stranding In Acc. To Is:8130/iec 60228 For Lower Watt Loss , Oxygen Free For Less Chances Of Oxidization, Insulation Pvc Type A/c/d , Flame Retardant As Per Is 10810-53, Better Amperage Rating As Per Is:3961 Part 5, In Existing Surface Or Recessed Pvc/ Ms Conduit/casing Capping Making Connections With Copper Lugs Of Suitable Size, Ferrules,testing Etc. As Required. Oem Must Have Its Own In House Nabl Lab Setup For All Testing Facilities For Wires. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 1 X 1.5 Sq.mm, 2 X 1.5 Sq.mm, 3 X 1.5 Sq.mm, 4 X 1.5 Sq.mm, 1 X 4.0 Sq.mm, 2 X 4.0 Sq.mm, 1 X 10.0 Sq.mm, P/laying Isi Marked P.v.c. Insulated Submersible Cable Confirming To(is:694) And As Per Is 8130 : 2013 Of 1.1 Kv Grade . Wire Should Be Made From 99.90 % Purity Copper, Stranding In Acc. To Is:8130/iec 60228 For Lower Watt Loss , Oxygen Free For Less Chances Of Oxidization, Insulation Pvc Type A/c/d , Flame Retardant As Per Is 10810-53, Better Amperage Rating As Per Is:3961 Part 5, Existing Pipe / Open Trench / Cable Tray / On Surface Including Making Connection Etc. As Required. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 4.0 Sq.mm 3 Core Flat / Round, 6.0 Sq.mm 3 Core Flat / Round, Supply & Drawing Wiring For Sub Mains Isi Marked (is:694) 1100 Volts Grade Pvc Insulated Flat Twin Core Sheathed Solid Aluminium Conductor With 10 Swg G.i. Support Wire Duly Clipped Etc. As Required. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 4.0 Sq.mm, 6.0 Sq.mm, 10.0 Sq.mm, Supplying And Fixing Of Power Plug Point With Modular Accessories As Per Pwd Specification For Electrical Works, On Hot Dipped Galvanized Modular Box Of 1.2 Mm Thick With Earthing Terminal/connector On Surface Or In Recessed With Suitable Size Of Modular Face Place With Grid Plate And Cover Plate Including Cost Of Isi Marked Modular 16 Amp. Switch (is :3854) And 6/16 Amp. Socket Outlet (is:1293) Making Connection , Testing , Etc. As Required. For Specification Of Wiring Accessories Refer Chapter-56 Related Item & For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr, P & F Phenolic Laminated Sheet 2.0 Mm Thick Of Following Size . Including Screws, Cup Washer As Required.for Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 100 Mm Dia., Providing & Fixing Of 240/415 V Ac Mcb With Positive Isolation Of 10 Ka Breaking Capacity (b/ C/d Tripping Characteristic As Per Type Of Load And Site Requirement) 4 Kv Impulse Withstand Voltage, Isi Marked Is 8828(1996) / Conforming To Iec 60898-1 2002, Iec 60947-2, Low Watt Losses, Trip Free Mechanisum , Energy Limiting Of Class 3 As Per Iec, Minimum Phase Termination Capacity Of 35sq.mm. , Conductor Line Load Reversibility , Ip 20 Contact Protection And Fitted In Existing Distribution Board/sheets, Minimum Electrical Operation 20,000 Upto 20 A Rating And 10,000 Upto 63 A, 5000 For 80 A & Above Rating Including Making Connections, Testing Etc. As Required. Oem Shall Have Submit Nabl / Cpri / Erda Accrediated Lab Type Test Reports & All As Per Pre Approved By Engineer Incharge. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr Single Pole Mcb (with B/c Curve Tripping Characteristics) 0.5 A To 5 A Rating, 6 A To 32 A Rating, Double Pole Mcb(with B/c Curve Tripping Characteristics) 6 A To 32 A Rating, Triple Pole Mcb (with B/c Curve Trippingcharacteristics) 6 A To 32 A Rating, 40 A Rating, Four Pole Mcb (with B/c C
