Description :
Tenders for Supply And Installation Of Open Gym Equipment At Panniyannur Grama Panchayath In Thalasseri Lac, Kannur - Retender - Open Gym Equipment, Od84136/2025-2026 : Single Bar - Supply And Installation Of Single Bar Having The Following Specifications: Dimensions: (l X W X H) 3550 X 2590 Mm. Main Frame - Made From Ø 48 Mm Od “b” Class G.i. Pipe. Frame Of Single Bar – Ø 33 Mm Od “b” Class G.i. Pipe. Foundation Plate – M.s. Round Plate Of Ø 250 Mm & 8 Mm Thick. Top Closing Cap’s - Decent Design Size Pp / Hdpe / Ms. Material. Foundation Stool: Made From Main Pipe Ø 88 Mm Od M.s Pipe And Top Support Of M.s. Round Plate Of Ø 250 Mm & 8 Mm Thickness Is Welded Top. Square Tube Of 30 X 30 X 2 Mm Must Be Used To Support Center Pipe. Height Of Stool Is 3 Ft. Foundation Stool Is Embedded In C.c. Stock Below Ground Level. Coating - Best Quality Of Powder Coating 80-120 Micron. Safety Instructions And Exercise Chart – Made From Aluminum / Stainless-steel Stick-on Product. All Joints Must Be Robotic Welded And Zinc Primer Paint Should Be Applied At All The Welding Points Prior To Finishing, Od84137/2025-2026 : Horse Rider - Supply And Installation Of Horse Rider Having The Following Specifications: Dimensions: (l X W X H) 1140 X 400 X 1400 Mm. Main Frame - Ø 114 Mm Od “b” Class Gi Pipe. Foundation Plate – M.s. Round Plate Of Ø 250 Mm & 8 Mm Thick. Foundation Cover Cap - Dome Shape Of Pp / Nylon / Hdpe Material. Remaining Frame – Is Made By Ø 48 Mm Od “b” Class Gi Pipe. Seat Frame – Is Made By Ø 48 Mm Od “b” Class Gi Pipe. Seat Position Must Be Horizontal To 110 -120 Degree. Link - Made Up Of Ø 48 Mm Od “b” Class G.i. Pipe. Angle Between Link And Ground Position Is 10-20 Degree. Handle - Ø 33 Mm Od “b” Class Gi Pipe. Paddle Vertical Support - Ø 60 Mm Od “b” Class Gi Pipe. Handle Frame- Ø 42 Mm Od “b” Class Gi Pipe Dually Bending Design. Foot Pipe - Ø 33 Mm Od “b” Class Gi Pipe. Support Frame – 10 Mm Thick Ms Flat Is Used. Seat- Dimension 320 X 270 X 100 Mm Blow Moulded Wall Thickness 4mm Material Hdpe. Bearing Bush Closing Cap – Pp / Nylon / Hdpe Material. Foundation Stool: Made From Main Pipe Ø 88 Mm Od M.s Pipe And Top Support Of M.s. Round Plate Of Ø 250 Mm & 8 Mm Thickness Is Welded At Top. Square Tube Of 30 X 30 X 2 Mm Must Be Used To Support Center Pipe. Height Of Stool Is 3 Ft. Foundation Stool Is Embedded In C.c. Stock Below Ground Level. Bearing - Use Is 6005 Permanent Lubricated Reputed Brand. Bearing Bushes - Ø 60mm Od Seamless Pipe. Pin – Made Of Ø 25 Mm M.s. Bright Bar. Grips - High Quality Rubber Ø 46 Mm Od. Circlips – A 24 Circlips Are Used For Assembly. Coating - Best Quality Of Powder Coating 60 To 70 Micron. Safety Instructions And Exercise Chart - Start &finish Position Stick On Product. All Joints Must Be Robotic Welded And Zinc Primer Paint Should Be Applied At All The Welding Points Prior To Finishing, Od84138/2025-2026 : Arm And Paddle Bike - Supply And Installation Of Arm And Paddle Bike Having The Following Specifications: Dimensions: (l X W X H) 990 X 500 X 880 Mm. Main Frame –100 Mm X 50 Mm X 2.5 Mm Rectangular Cr Pipe With Bending Design. Foundation Plate – M.s. Round Plate Of Ø 250 Mm & 8 Mm Thick. Handle – Ø 33 Mm Od “b” Class Gi Round Pipe Dully Bending Design. Side And Top Cover – 1.6 Mm Thick Ms Laser Cutting Profile Is Used. Seat – 380 X 275 X 60 Mm Thick Hdpe Blow Moulding. Paddle –100 Mm X 50 Mm Capsule Pipe And 40 X 16 Mm Ms Flat Should Be Used For Connecting The Paddle And Shaft. Closing Cap’s – Pp / Nylon / Hdpe Material. Foundation Stool: Made From Main Pipe Ø 88 Mm Od M.s Pipe And Top Support Of M.s. Round Plate Of Ø 250 Mm & 8 Mm Thickness Is Welded Top. Square Tube Of 30 X 30 X 2 Mm Must Be Used To Support Center Pipe. Height Of Stool Is 3 Ft. Foundation Stool Is Embedded In C.c. Stock Below Ground Level. Bearing Bushes - Ø 60 Mm Od Seamless Pipe. Bearing - Use Is 6005 Permanent Lubricating Sealed Reputed Brand. Shaft -made Up Of Ø25mm Od Ms Bright Bar. Circlips– A 24 Circlips Ar
