Description :
Tenders for Tender For Ortho Requirement - Dhrmg Cortical Screws 2.7mm-34 Mm.,, Dhrmg Cortical Screws 2.7mm-44 Mm,, Dhrmg Cortical Screws 2.7mm-42 Mm., Dhrmg Cortical Screws 2.7mm-40 Mm, Dhrmg Cortical Screws 2.7mm-38 Mm., Dhrmg Cortical Screws 2.7mm-36 Mm,, Connecting Rods - 11.0mm X 40cm, Connecting Rods - 11.0mm X 30cm, Connecting Rods - 11.0mm X 20cm, Cobra Plate 8 To 11 Holed.1 Unit Consists Of 1 Plate And 3.5mm Screws For All The Available Holes.(quote For Entire Assembly With Screws), Clavicular Hook Lock Plate 4 To 8 Holes (plate With Screw) (all Sizes Both Sides) Lcp Combi-holes In The Shaft. 1 Unit Consists Of I) Plate - 1. Plate Should Fit Anatomically, Ii)corresponding Locking Screws -number Of Screws Corresponding To Number Of Holes In Plate. The Screws Should Match With Threads Of The Locking Holes(quote For Entire Assembly With Screws). Provision For Exchange Of Unused Sizes Should Be Present. (the Complete Set Of Instruments Should Be Supplied On Loaner Basis), Articulated External Fixator For Wrist, Ao Clamps - T-t Clamps 11 X 11mm, Ao Clamps - Swivel Clamps 4.5 X 11 Mm, Ao Clamps - Swivel Clamps 4 Mm X 4 Mm, Ao Clamps - Swivel Clamps 3.5 Mm X 4 Mm, Ao Clamps - Swivel Clamps 2.5 Mm X 4 Mm, Ao Clamps - Double Pin Clamps, Ao Ball Type Clamp, Antibiotic Bone Cement 40g Low Viscosity, For Use In Cement Gun, Antibiotic Bone Cement 40 Gm High Viscosity, Connecting Rods - 11.0mm X 50cm, K Nails For Femur- 8 X 42 Mm, K Nails For Femur- 8 X 40 Mm, K Nails For Femur- 8 X 38 Mm, K Nails For Femur- 11x 44 Mm, K Nails For Femur- 11 X 42 Mm, K Nails For Femur- 11 X 40 Mm, K Nails For Femur- 11 X 38 Mm, K Nails For Femur- 10 X 44 Mm, K Nails For Femur- 10 X 42mm, K Nails For Femur- 10 X 40 Mm, K Nails For Femur- 10 X 38 Mm, Drill Bits - 4.5mm X 300mm Solid, Drill Bits - 4.5mm X 300mm Cannulated, Drill Bits - 4.5mm X 150mm Cannulated, Drill Bits - 4.0mm X 400mm Solid, Drill Bits - 4.0mm X 300mm Cannulated, Drill Bits - 3.2mm X 400mm Solid, Drill Bits - 3.2mm X 300mm Solid, Drill Bits - 3.2mm X 300mm Cannulated, Drill Bits - 3.2mm X 150mm Solid, Drill Bits - 2.7mm X 150mm Solid, Drill Bits - 2.7mm X 150mm Cannulated, Drill Bits - 2.0mm X 150mm Solid, Drill Bits - 1.8mm X 150mm, Semi Tubular (small) - 8 Hole, Semi Tubular (small) - 7 Hole, Semi Tubular (small) - 6 Hole, Semi Tubular (small) - 10 Hole, Plate 4.5mm Broad Lcp 6 To 12 Holes, 14 Hole,16 Hole 1 Unit Consists Of 1 Plate And Locking Screws For All The Available Holes. The Screws Should Match With Threads Of The Locking Holes(quote For Entire Assembly With Screws), Plate 4.5mm Broad Dcp 6 To 12 Holes, 14 Hole,16 Hole.1 Unit Consists Of 1 Plate And 4.5mm Screws For All The Available Holes.(quote For Entire Assembly With Screws), Plate 4.5 Mm Narrow Dcp 6 To 12 Holes, 14 Hole,16 Hole.1 Unit Consists Of 1 Plate And 4.5mm Screws For All The Available Holes.(quote For Entire Assembly With Screws), Plate 3.5mm Reconstruction Plate 5 To 12 Holes.1 Unit Consists Of 1 Plate And 3.5mm Screws For All The Available Holes.(quote For Entire Assembly With Screws), Plate 3.5mm Dcp 6 To 12 Holes.1 Unit Consists Of 1 Plate And 3.5mm Screws For All The Available Holes.(quote For Entire Assembly With Screws), Philos Plate 3 To 12 Hole (plate With Screw) (all Sizes Both Sides) Lcp Combi-holes In The Shaft. 1 Unit Consists Of I) Plate - 1. Plate Should Fit Anatomically, Ii)corresponding Locking Screws -number Of Screws Corresponding To Number Of Holes In Plate. The Screws Should Match With Threads Of The Locking Holes(quote For Entire Assembly With Screws). Provision For Exchange Of Unused Sizes Should Be Present. (the Complete Set Of Instruments Should Be Supplied On Loaner Basis), K Wires -3.0mm X 300mm, K Wires -2.5mm X 300mm, K Wires -2.0mm X 300mm, K Wires -1mm X 300mm, K Wires -1mm X 150mm, K Wires -1.8mm X 300mm, K Wires -1.8mm X 150mm, K Wires -1.5mm X 300mm, K Wires -1.5mm X 150mm, K Nails For Femur- 9 X 46mm, K Nails For Femur- 9 X 44mm, K Nails For Femur- 9 X 42 Mm, K Nails For Femur- 9 X 40
