Description :
Tenders for Supply And Installation Of Open Gym Equipments In Central Zone And Shahdara South Zone Under Mplads Funds For Various Locations Of Parks In Municipal Corporation Of Delhi - Supply And Installation Of Open Gym Equipments In Central Zone And Shahdara South Zone Under Mplads Funds For Various Locations Of Parks In Municipal Corporation Of Delhi, Triceps Puller (dimemsions:- 2110mm (length) X 600mm (width) X 1600mm (height) Triceps Puller Is Made From C Class Gi-pipe. The Center Pipe Is Of 100mm Nb Made From C Class Gi-pipe, And The Bottom Support Is Of Ms Round Plate Of 250mm Dia& 10mm Thick Is Welded At The Bottom Of The Pipe. The Remaining Frame Is Made Of 32mm Nb C Class Gi-pipe. The Handle Frame Is Made Of 32mm Nb & 25mm Nb C Class Gi-pipe. The Seat Frame Is Of 32mm Nb C Class Gi-pipe. For The Assembly Different Bushes Are Used Which Is Made From 60mm With 3mm Thick Seamless Pipe Is Used. The Foundation Used For Fixing It Consist Of Three Equal Items I.e 80mm Nb Made From C Class Gi-pipe, Ms Round Plate Of 250mm Dia& 10mm Thick, 25mmx25mmx3mm Ms Angle. Closing Caps Are Made From Top Quality Lldpe Material Which Is Of 2mm Thick. The Pins Used Are Made Up Of 25mm & 17mm Dia Solid Bar. The Bearings Used Are Of 6205 & 6203 Permanent Lubricated Sealed Bearing Of Reputed Make. The Nut Bolts Used For Assembly Are Made From Ss Material. The Circlip Used For Assembly Is Made Up Of 25mm & 17mm Dia.high Tensile Steel With Galvanized Nuts & Bolts Are Used For Assembly. The Foundation Pipes Are Embedded In Cc Stock And Painting Is Done By Attractive Color Spraying After Proper Surface Treatment, The Initial Coat Of Primer Surface Is Applied Before Top Coat. The Powder Coating Is Done From Poly Rethane& Epoxy Powder With 60 To 70 Micron Thickness.the Holding Down/fixing Of Gym Equipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size), Leg Press Leg Press Is Made From C Class Gi-pipe. The Center Pipe Is Of 100mm Nb Made From C Class Gi-pipe, And The Bottom Support Is Of Ms Round Plate Of 250mm Dia& 10mm Thick Is Welded At The Bottom Of The Pipe. The Remaining Frame Is Made Of 32mm Nb C Class Gi-pipe. The Handle Frame Is Made Of 25mm Nb C Class Gi-pipe. Middle Support Is Of 25mm Nb C Class Gi-pipe. Lower Frame Is Made Of 32mm Nb C Class Gi-pipe. For The Assembly Different Bushes Are Used Which Is Made From 60mm With 3mm Thick Seamless Pipe Is Used. The Foundation Used For Fixing It Consist Of Three Equal Items I.e 80mm Nb Made From C Class Gi-pipe, Ms Round Plate Of 250mm Dia& 10mm Thick, 25mmx25mmx3mm Ms Angle. Closing Caps Are Made From Top Quality Lldpe Material Which Is Of 2mm Thick. The Pins Used Are Made Up Of 25mm Dia Solid Bar. The Bearings Used Are Of 6205 Permanent Lubricated Sealed Bearing Of Reputed Make. The Nut Bolts Used For Assembly Are Made From Ss Material.high Tensile Steel With Galvanized Nuts & Bolts Are Used For Assembly. The Circlips Used For Assembly Are Made Up Of 25mm Dia. The Foundation Pipes Are Embedded In Cc Stock And Painting Is Done By Attractive Color Spraying After Proper Surface Treatment, The Initial Coat Of Primer Surface Is Applied Before Top Coat. The Powder Coating Is Done From Poly Rethane& Epoxy Powder With 60 To 70 Micron Thickness.the Holding Down/fixing Of Gym Equipments Shall Be Emboded In Cement Concrete In The Ratio Of 1:2:4 (1cement : 2 Coarse Sand :4 Stone Agg. 20mm Nominal Size), Back Extension Dimensions: - 1400mm (length) X 700mm (width) X 820mm (height). Safe Area: - 2.4mtr X 1.7mtr. Back Extension Equipment Made From C Class G.i. Pipe Of Different Nb Pipe. (nb Stands For Nominal Bore I.e. Internal Diameter Of Pipe In Mm) The Main Frame Is Of 50mm Nb Made From C Class G.i. Pipe. The Foot Resting Frame Of 32mm Nb Made From C Class G.i. Pipe. The Handle Frame Is Of 25nb Made From C Class G.i. Pipe. The Seat Fitted On The Outer Frames Is Made Up Of M.s. Sheet Of Size 330 Mm X
