Description :
Tenders for Improvement And Development Of Electrical Installation And Fans At Mcd Primary School Neb Sarai Ward No 160 Under South Zone - Rewiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.mm Frls Pvc Insulated Copper Conductor Single Core Cable And 1.5 Sq.mm Frls Pvc Insulated Copper Conductor Single Core Cable As Earth Wire In Existing Surface/recessed Steel/pvc Conduit Including Dismantling As Required. Group C, Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Piano Type Switch, Phenolic Laminated Sheet, Suitable Size M.s. Box And Earthing The Point With 1.5 Sq.mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Group C, Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surfac/recessed Steel/ Pvc Conduit As Required. (a) 3 X 2.5 Sq. Mm, 6 X 2.5 Sq. Mm, 3 X 4 Sq. Mm, 3 X 6 Sq. Mm, Brush Less Direct Current (bldc) Motor Supply, Installation, Testing And Commissioning Of Ceiling Fan With Brushless Direct Current (bldc) Motor, Class Of Insulation: B, 3 Nos. Metal( Aluminum Alloy) Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit,safety Rope, Copper Winding, Steel/al Body Power Factor Not Less Than 0.9, Service Value (cm/m/w) Minimum As Below, 350 Rpm (tolerance As Per Is :374-2019), Thd (total Harmonic Distortion) Less Than 10%, Suitable For Operation With Regulator For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C (max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50hz, Single Phase Ac Ceiling Fan Compliant To Is 374:2019 Fan Supply,earthing Etc. Complete As Req 1200mm, Service Value 6.0 Cm/min/watt, Air Delivery 210 Cm/min (minimum) 1200mm, Service Value 6.0 Cm/min/watt, Air Delivery 210 Cm/min (minimum), Supplying And Fixing Following Piano Type Switch/ Socket On The Existing Switch Box/ Cover Including Connections Etc. As Required. (a) 5/6 Amps Switch, 3 Pin 5/6 A Socket Outlet, 15/16 A Switch, 6 Pin 15/16 A Socket Outlet, Supplying And Fixing Of Following Sizes Of Medium Class Pvcconduit Along With Accessories In Surface/recess Includingcutting The Wall And Making Good The Same In Case Of Recessedconduit As Required. 20mm, Supplying And Fixing Metal Box Of Following Sizes (nominal Size) On Surface Or In Recess With Suitable Size Of Phenolic Laminated Sheet Cover In Front Including Painting Etc. As Required. (a) 150 Mm X 75 Mm X 60 Mm Deep, 200 Mm X 250 Mm X 60 Mm Deep, 250 Mm X 300 Mm X 60 Mm Deep, Supply And Fixing Of 3 Mm Thick Phenolic Laminated Sheet, Led Batten Light (system Lumen Efficacy 105 120 Lm/watt) Supplying, Installation, Testing & Commissioning Of Led Surface Mounted Batten Light Of Following Body Material And Construction As Per Is : 10322 With Driver (replaceable) As Per The Requirement With Driver Efficiency >85% ,operating Voltage Ac 140-270 Volt, Freq 50/60 Hz, Operating Temp Range -15 Deg To 40 Deg Centigrade, Internal Surge Protection Of 2.5 Kv With Short & Open Circuit Protection ,thd 10% , P. F. 0.95, Ip20, Cri >80, Flicker Free, (flicker Should Be Below 5 %), Life Time (led,driver & Electrical Circuitary), Of Minimum 50000 Burning Hours With , 70% Of Initial Lumen Maintained Till Life Ends, Cct 3000 K / 4000 K / 5700 K /6000 K/6500 K (as Per Ansi Bin), Sdcm(standard Deviation Color Matching) 3, Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Of Relevant Bis Standard And Trade Mark Certificate ( T.c.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen Printing On Housing. Complete In All Respect I/c Connections With 1.5 Sq Mm Frls, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required With Minimum 5 Year Oem Warranty. System Lumen Efficacy 105 120 Lm/watt Output . Lm79 &
