Description :
Tenders for Supply Of Injections - Dismantling Doors, Windows And Clerestory Windows (steel Or Wood) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead :, Of Area 3 Sq. Metres And Below, Dismantling Cement Asbestos Or Other Hard Board Ceiling Or Partition Walls Including Stacking Of Serviceable Materials And Disposal Of Unserviceable Materials Within 50 Metres Lead., Dismantling Wood Work In Frames, Trusses, Purlins And Rafters Up To 10 Metres Span And 5 Metres Height Including Stacking The Material Within 50 Metres Lead :, Of Sectional Area Below 40 Square Centimetres, Providing And Fixing Factory Made Single Extruded Wpc (wood Polymer Composite) Solid Door/window/clerestory Windows & Other Frames/ Chowkhat Comprising Of Virgin Pvc Polymer Of K Value 58-60 (suspension Grade), Calcium Carbonate And Natural Fibers (wood Powder/ Rice Husk/ Wheat Husk) And Non Toxic Additives (maximum Toxicity Index Of 12 For 100 Gms) Fabricated With Miter Joints After Applying Pvc Solvent Cement And Screwed With Full Body Threaded Star Headed Ss Screws Having Minimum Frame Density Of 750 Kg/cum, Screw Withdrawal Strength Of 2200 N (face) & 1100 N (edge), Minimum Compressive Strength Of 58 N/mm2, Modulus Of Elasticity 900 N/mm2 And Resistance To Spread Of Flame Of Class A Category With Property Of Being Termite/borer Proof, Water/moisture Proof And Fire Retardant And Fixed In Position With M.s Hold Fast/lugs/ss Dash Fasteners Of Required Dia And Length Complete As Per Direction Of Engineer-in- Charge. (m.s Hold Fast/lugs Or Ss Dash Fasteners Shall Be Paid For Separately). Note: For Wpc Solid Door/window Frames, Minus 5 Mm Tolerance In Dimensions I.e Depth And Width Of Profile Shall Be Acceptable. Variation In Profile Dimensions On Plus Side Shall Be Acceptable But No Extra Payment On This Account Shall Be Made., Frame Size 65 X 100 Mm, Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows Including Isi Marked Aluminium Butt Hinges Of Required Size With Necessary Screws Inluding, Panelling , All Complete As Per Direction Of Engineer-in-charge., 30 Mm Thick Superior Hard Neem Wood Red Colour (without White) Category-ii Chemically Treated, Providing And Fixing Factory Made Upvc Glazed/wire Mesh Windows/ Doors Comprising Of Lead Free Upvc Multi-chambered Frame, Sash And Mullion/coupler (where Ever Required) Extruded Profiles Having Minimum Wall Thickness Of 1.70 Mm For Series R1 And R2 Profiles And 2.10 Mm For Series R3 And R4 Profiles Conforming To En: 12608 In Any Shape, Colour And Design Duly Reinforced With Galvanized Mild Steel Section Made Of Required Shape & Size As Per Cpwd Specification, Upvc Extruded Glazing Beads, Interlocks And Lnline Sash Adaptor (where Ever Required) Of Appropriate Dimension, Epdm Gasket, Hardware, Ss 304 Grade Fasteners Of Minimum 8 Mm Dia With Countersunk Head, Comprising Of Matching Polyamide Pa6 Grade Sleeve For Fixing Frame To Finished Wall As Per Is 1367 : Part 1 To 14, Plastic Packers, Plastic Caps And Necessary Stainless Steel Screws Etc. Profile Of Frame, Sash & Mullion (if Required) Shall Be Mitred Cut And Fusion Welded/mechanically Jointed Duly Sealed At All Corners, Including Drilling Of Holes For Fixing Hardware And Drainage Of Water Etc. After Fixing Frame The Gap Between Frame And Adjacent Finished Wall Shall Be Filled With Weather Proof Silicon Sealant Over Backer Rod Of Approved Size And Quality, All Complete As Per Approved Drawing Conforming To Cpwd Specification & Direction Of Engineer-in-charge. Section Of Steel Reinforcement And Cross Sections Of Upvc Profiles To Be As Per Design Approved By Engineer-in-charge. Wire Mesh / Glazing Of Plain/ Toughened/ Laminated/ Double Glass Unit With / Without High Performance Coatings As Per Design Requirements And Conforming To Is: 3548 & Is: 16231 Shall Be Paid Separately. Note:- Structural Design Proof Checked From A Government Engineering Institute,
