Description :
Tenders for Ridf Xxviii - Lift Irrigation Projects In Various Padashekharams Of Wayanad District- Procurement Of Submersible Pumpsets, Fittings, Accessories, And Related Electrical Works - Procurement, Installation, Erection, Testing, And Commissioning Of Pumpsets And Allied Works At Punchavayal, Manikkuni, Kolembetta, Valiyavattam, And Padiyeri Pumphouses. - Procurement, Installation, Erection, Testing, And Commissioning Of Pumpsets And Allied Works At Punchavayal, Manikkuni, Kolembetta, Valiyavattam, And Padiyeri Pumphouses., Supply, Installation, Erection, Testing, Commissioning And Fitting Charges For All Accessories Of Horizontally Mounted Submerged Centrifugal Non Clog Pump Set Of Compact Unitary Mono-block Submerged Single/multi Stage,volute Type Casing With Suitable Radial Type Impellers On Common Shaft For Pump And Motor ,anti Friction Bearing With Life Time Greasing, Protection Features With Sensors To Monitor Temperature,mechanical Seal Leakage ,etc.(the Pump Should Be Confirming To His/is Standards).the Moc Of Pump,casing-cast Iron,impeller -ss Cf8m,shaft-ss-316,suction Strainer -ss And Other As Per Is Standard.the Motor Should Be Suitable For 3 Phase,415v /-10%,50hz /5%,ac Supply Submersible Motor Having Class F /h Insulation, Air Filled And Ip-68protection Confirming To Is 325 Or Latest Standards Suitable For Day Night Operation.the Pump Discharge Capacity Of 230 Cubic Metre /hour Against Duty Point Head Of 42 Mtrs, Working Head Range 18 - 47m, Discharge Range 136 - 57 Lps ,speed 1450rpm(n) Or Nearer ,with 10meters Of Copper Power Cable And Control Cable, Railing Arrangement. The Pump Should Be Painted With Three Coats Of Suitable Anti Corrosive Paint Over Priming Coat. The Electrical Works For The Pumpset Should Be Completed As Per Kseb Rules And Regulations And The Contractor Is Responsible For Arranging Premissions And Certificates From The Electrical Inspectorate. The Suction Side Of The Pumpset Should Be Provided With An Additional Iron Grill For Preventing Foreign Particles Inside The Inlet Side Of The Pump Casing., Supply And Erection Of 60hp Auto Transformer Starter (ats) With Suitable Incommer And Contactors Including 24 Kvar Capacitor With Required Indications ,metering And Protections For Single Phasing ,overload, Pump Monitoring Unit To Protect From Ingress, High Temperature Level Etc Enclosed In A Closed Panel Board, Supply And Laying Additional Termination Cable Of 1.1kv 3.5 Core 95sqmm Aluminium Conductor Xlpe Insulated ;steel Armoured Ug Cable As Per Relevant Is 7098 With Support For Cable, Supply, Installation, Erection, Testing, Commissioning And Fitting Charges For All Accessories Of Horizontzlly Mounted Submerged Centrifugal Non Clog Pump Set Of Compact Unitary Mono-block Submerged Single/multi Stage,volute Type Casing With Suitable Radial Type Impellers On Common Shaft For Pump And Motor ,anti Friction Bearing With Life Time Greasing, Protection Features With Sensors To Monitor Temperature,mechanical Seal Leakage ,etc.(the Pump Should Be Confirming To His/is Standards).the Moc Of Pump,casing-cast Iron,impeller -ss Cf8m,shaft-ss-316,suction Strainer -ss And Other As Per Is Standard.the Motor Should Be Suitable For 3 Phase,415v /-10%,50hz /5%,ac Supply Submersible Motor Having Class F /h Insulation, Air Filled And Ip-68protection Confirming To Is 325 Or Latest Standards Suitable For Day Nightoperation.the Pump Discharge Capacity Of 188 Cubic Metre /hour Against Duty Point Head Of 35 Mtrs,working Head Range 16 - 42m, Discharge Range 102 - 42 Lps ,speed 1450 Rpm(n) Or Nearer ,with 10meters Of Copper Power Cable And Control Cable,railing Arrangement. The Pump Should Be Painted With Three Coats Of Suitable Anti Corrosive Paint Over Priming Coat. The Electrical Works For The Pumpset Should Be Completed As Per Kseb Rules And Regulations And The Contractor Is Responsible For Arranging Premissions And Certificates From The Electrical Inspectorate. The Suction Side Of The Pumpset Should Be Provided With An Addition
