Description :
Tenders for Construction Of Madakkathara Grama Panchayath Stadium In Ollur Lac, Thrissur- Supply And Installation Of Outdoor Gym Equipment - Open Gym Equipment, Od263824/2025-2026 : Chest Press (double) - Supply And Installation Of Double Chest Press Having The Following Specifications: Dimensions: (l X W X H) 1955 X 710 X 1900 Mm. Main Center Pipe - Ø 114 Mm Od ?b? Class Gi Pipe. Foundation Plate ?m.s. Round Plate Of Ø 250mm & 8 Mm Thick. Foundations Cover Cap- Dome Shape Of Pp / Nylon / Hdpe Material. Remaining Frame - Made Up Of Ø 48 Mm Od ?b? Class G.i. Pipe. Handle - Made Up Of Ø48mm Od ?b? Class G.i. Pipe. Link - Made Up Of Ø 48 Mm Od ?b? Class G.i. Pipe. Seat & Back Rest ? 380 X 275 X 60 Mm Thick High-density Polyethylene (hdpe) Blow Molded With M10 Integrated Wall Thickness 3 To 4 Mm. Bearing Bush Closing Cap?s? Pp / Nylon / Hdpe Material. Handle Must Be Connected With Frame By 8 Mm Laser Cutting Ms Profile. Top Closing Cap ? Dome Shape Made By Pp / Nylon / Hdpe Material.foundation Stool: Made From Main Pipe Ø 88 Mm Od M.s Pipe And Top Support Of M.s. Round Plate Of Ø 250 Mm & 8 Mm Thickness Is Welded Top. Square Tube Of 30 X 30 X 2 Mm Must Be Used To Support Center Pipe. Height Of Stool Is 3 Ft. Foundation Stool Is Embedded In C.c. Stock Below Ground Level. Bearing - Use Is 6005 Permanent Lubricated Reputed Brands. Pin ? Made Up Of Ø 25 Mm M.s. Bright Bar Pin. Bearing Bushes - Ø 60 Mm Od Seamless Pipe. Grips - High Quality Rubber Ø 46 Mm Od. Circlips?a 24 Circlips Are Used For Assembly. Coating - Best Quality Of Powder Coating 80-120 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product. All Joints Must Be Welded As Per Is Standards And Zinc Primer Paint Should Be Applied At All The Welding Points Prior To Finishing. (foundation Shall Be Min M20 Cc And Design Shall Be Approved By The Engineer-in -charge Before Installation.), Od263826/2025-2026: Air Walker - Supply And Installation Of Air Walker Having The Following Specifications: Dimensions: (l X W X H) 1190 X 380 X 1244 Mm. Main Frame- Ø 88 Mm Od "b" Class Gi Pipe Dually Bending Design.foundation Plate- M.s. Round Plate Of Ø 250 Mm & 8 Mm Thick. Paddle Ø 42 Mm Od Round Gi Pipe. Handle - Ø 33 Mm Od "b" Class Gi Pipe. Footrest - Cast Iron 124 X 296 X 5 Mm Thick And M.s. Plate Of 2 Mm Thick Use To Support It. Top Closing Cap Dome Shape Made By Pp / Nylon / Hdpe Material. Closing Cap's - Pp / Nylon / Hdpe Material. Bracket - 8 Mm Thick Laser Profile Is Used To Support Paddle Frame. Foundation Stool: Made From Main Pipe Ø 88 Mm Od M.s Pipe And Top Support Of M.s. Round Plate Of Ø 250mm & 8 Mm Thickness Is Welded Top. Square Tube Of 30 X 30 X 2 Mm Must Be Used To Support Center Pipe. Height Of Stool Is 3 Ft. Foundation Stool Is Embedded In C.c. Stock Below Ground Level. Bearing- Use Is 6005 Permanent Lubricated Reputed Brands. Pin's Ø 25mm M.s. Bright Bar Pin. Circlips- A 24 Circlips Are Used For Assembly. Bearing Bushes -Ø 60 Mm Od Seamless Pipe. Coating - Best Quality Of Powder Coating 80-120 Micron. Safety Instructions And Exercise Chart Start & Finish Position Stick On Product. All Joints Must Be Welded As Per Is Standards And Zinc Primer Paint Should Be Applied At All The Welding Points Prior To Finishing. (foundation Shall Be Min M20 Cc And Design Shall Be Approved By The Engineer-in -charge Before Installation.), Od263830/2025-2026 : Leg Press (double) - Specifications: Dimensions: (l X W X H) = 1676 X 400 X1500mm. Main Frame - Ø 114 Mm Od “b” Class Gi Pipe. Foundation Plate – M.s. Round Plate Of Ø 250 Mm & 8 Mm Thick. Foundations Cover Cap - Dome Shape Of Pp / Nylon / Hdpe Material. Link - Is Ø 60 Mm Od “b” Class Gi Pipe. Seat Frame - Ø 42 Mm Od “b” Class Gi Pipe. Leg Press Back Rest Should Be Angled In 120 - 130 Degree. Footrest - Cast Iron 124 X 296 X 5 Mm Thick And M.s Plate Of 2 Mm Thick Use To Support It. Seat & Back Rest – 380 X 275 X 60 Mm Thick High- Density Polyethylene (hdpe) Blow Molded With M
