Description :
Tenders for Providing And Fixing Of Open Gym Equipments. - Providing And Installation Of Rower Dimensions: - 1200mm (length) X 1000mm (width) X 920mm. (height) Safe Area: - 1.5 Mtr X1.5 Mtr. Rower Equipment Made From C Class G.i. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.e. Internal Diameter Of Pipe In Millimeters. The Main Frame Is Of 80nb C Class G.i. Pipe Welded With M.s. Round Plate Of 250mm X 10mm. The Handle Frame 25nb Is Made From C Class G.i. Pipe. The Foundation Used For Fixing Is A Structure And Made From Center Pipe Of G.i. Of 80 Nb C Class Welded With M.s. Round Plate Of 250 Mm &10mmthick. Main Pipe Supported With 25mm X 25mmm.s. Angles Of 3mm Thickness And 20mm X 40mm Crc Square Pipes Of 3mm Thickness. To Join The Movement Frame To Main Frame Connecting Links Made Up From 32 Nb G.i. C Class Pipe. The Seat Fitted On The Outer Frames Are Made Up Of M.s. Sheet Of Size 330 Mm X 300 Mm X 2 Mm Thickness And Deep Drawn And Pressed In Tools And Dies To Have Uniform Radius Of 20 Mm With No Sharp Edges. Pins Used Of Diameter 17mm Are Made Up From Sae 8620 Bright Material. The Bearings Used Are Of 6203zz Permanent Lubricated Sealed Bearing Of Reputed Brand (skf/fag). High Tensile Steel With Galvanized Nuts And Bolts Are Used For Assembly. The P.u. Bushes (stopper) Used To Avoid The Collision. The Circlips Used For Assembly Is Of A 16 The Powder Coating Done With Polyester Powders From Ackzonoble Or Berger Paints With 60 To 70 Micron Thickness, Single Seated Pullar-*dimesions: - 1900mm (length) X 740mm (width) X 1920mm (height).*safe Aera: - 1.2mtr X 3mtr.*seated Puller Equipment Made Up Of C Class G.i. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.e. Internal Diameter Of Pipe In Millimeters.*make Of G I Pipe Will Be Of Tata, Jindal, Swastik, Zenith Or Siddharth.*the Center Pipe Is Of 100nb Made From C Class G.i. Pipe.*bottom Support Is Of M.s. Round Plate Of 0250mm & 10mm Thickness Is Welded.*all Linkages Are Made Up Of 25nb C Class G.i. Pipe.*the Handle Frame Is Of 32nb C Class G.i. Pipe.*the Seat Frame Is Of 32nb C Class G.i. Pipe.*to Build Structure Bushes Are Used Which Are Made From Seamless Pipe Of 60mm O.d. And 5mm Thickness As Well As 60mm Diameter Solid Bar Bush Is Used.*the Foundation Used For Fixing Is A Structure And Made From Center Pipe Of G.i. Of 80nb C Class. Welded With M.s. Round Plate Of 0250mm & 10mm Thick. Main Pipe Supported With 25mm X 25mm M.s. Angles Of 3mm Thickness And 20mm X 40mm Crc Square Pipes Of 3mm Thickness.*foundation Cover Closing Cap Is Made From Frp Material.*the Seats And Back Rests Are Fitted On The Outer Frames Are Made Up Of M.s. Sheet Of Size 330mm X 300mm X 2mm Thickness And Form Radius Of 20 Mm With No Sharp Edges.*closing Caps Are Made Up Of High Quality Fiber Reinforced Plastic Material.*pins Used Of Diameter 25mm And 17mm Are Made Up From Sae 8620 Bright Material.*the Bearings Used Are Of 6205zz And 6203zz Permanent Lubricated Sealed Bearing Of Reputed Brand (skf/fag).*high Tensile Steel With Galvanized Nuts & Bolts Are Used For Assembly.*the Cerclips Used Of Assembly Are Of A16.*the Powder Coating Done With Pure Polyester Powders Of Ackzonoble Or Berger Paints With 60 To 70 Micron Thickness., Providing & Installation Of Parallel Bar Dimensions:-1870 Mm (length) X 530 Mm (width) X 2000 Mm. (height). Safearea: - 5.0 Mtr X 2.5mtr. Parallel Bar Equipment Made From C Class G.i. Pipe Of Different Nb. Nb Stands For Nominal Bore Sizes I.e. Internal Diameter Of Pipe In Millimeters. The Main Frame Made From 50 Nb C Class G.i. Pipe. The Handle Frame Is Of 32nb Made From C Class G.i. Pipe. The Foundation Used For Fixing Is25mmx25mmx3mmthickness L Angle. Closing Caps Are Made Up Of High Quality Fiber Reinforced Plastic Material. The Powder Coating Done With Polyester Powders From Ackzonoble Or Berger P Aints With 60 To70 Micron Thickness., Providing & Fixing Of Cycle As Per Specifications As Underarea - 1.8 X 0.8 Mtr.safe Area 2.8 X 1.8 Mtr.height 1.10
