Cement And Asbestos Tenders

State Government

CTN :40505230

16 Jun, 2025 10.76 Lacs

Haveri - Karnataka

Tender For corrigendum : providing qc necessary equipments for qulity control labs in qc charges of work construction of kittur rani chennamma residential school at akkur village sno 98 guttala hobli in haveri taluka,haveri district - item code: sl no 1 (data rate), item description: electronic weighing, balance with battery backup of capacity 30, kg accuracy - 5 gm ---- in addition to the, conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 3 (data rate), item description: electronic weighing, balance with battery backup of capacity 1kg, and accuracy-1mg ---- in addition to the, conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 5 (data rate), item description: stainless steel depth, guage-150mm long ---- in addition to the, conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 6 (data rate), item description: slump cone complete with, base plate and graduated tamping rod. ---- in, addition to the conditions displayed in the, kppp portal, separate general conditions, sheet uploaded and should be considered, item code: sl no 9 (data rate), item description: core cutter, dolly and, rammer of 9.5 kg one set ---- in addition to, the conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 10 (data rate), item description: rapid moisture meter, apparatus with calcium carbide powder box, 1no packed in wooden box with calibration, report ---- in addition to the conditions, displayed in the kppp portal, separate, general conditions sheet uploaded and, should be considered, item code: sl no 11 (data rate), item description: bitumen extractor hand, operated with handle ---- in addition to the, conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 12 (data rate), item description: filter paper ( bundle of, 100 pieces) ---- in addition to the conditions, displayed in the kppp portal, separate, general conditions sheet uploaded and, should be considered, item code: sl no 13 (data rate), item description: benzene ---- in addition, to the conditions displayed in the kppp, portal, separate general conditions sheet, uploaded and should be considered, item code: sl no 14 (data rate), item description: bosch digital camber, board range120 cm (bosch dnm120i digital, inclinometers) ---- in addition to the, conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 15 (data rate), item description: digital temperature meter, / thermometer with sensor (o c to 300 c), with accuracy of +/-0.1 degree centigrade ----, in addition to the conditions displayed in the, kppp portal, separate general conditions, sheet uploaded and should be considered, item code: sl no 17 (data rate), item description: cast iron concrete cube, mould 15x15x15cm as per isi standard (set, of 3 cubes) ---- in addition to the conditions, displayed in the kppp portal, separate, general conditions sheet uploaded and, should be considered, item code: sl no 18 (data rate), item description: cast iron concrete beam, mould for flexural test 150x150x700 mm as, per isi standard ---- in addition to the, conditions displayed in the kppp portal,, separate general conditions sheet uploaded, and should be considered, item code: sl no 19 (data rate), item description: iron tray 10x12" ---- in, addition to the conditions displayed in the, kppp portal, separate general conditions, sheet uploaded and should be considered, item code: sl no 20 (data rate), item description: iron tray 12x18" ---- in, addition to the conditions displayed in the, kppp portal, separate general conditions, sheet uploaded and should be considered, item code: sl no 21 (data rate), item descript

corporations/Associations/Others

CTN :40692309

18 Jun, 2025 9.82 Lacs

Ahmedabad - Gujarat

Tender For providing and fixing rcc china mosaic benches at various places under m.p., m.l.a., muni.counsilor and other budget in shahibaug ward.

corporations/Associations/Others

CTN :40692326

25 Jun, 2025 19.99 Lacs

Ahmedabad - Gujarat

Tender For providing and fixing and supplying decorative c.i.garden benches (frp), stainless steel (ss) benches andprecast rcc benches under muni.coun., mp, m.l.a.shree budget work in different places in thaltej ward innorth west zone (arc tender)..

Corporations And Associations And Others

CTN :40693045

18 Jun, 2025 1.68 Lacs

Ambala - Haryana

Tender For amtc of ephs sector 34 ue ambala cantt providing and fixing of 10 hp submersible motor pumping set non clog for sewerage 100mm id di pipe and panel board at temporary disposal near peer complete in all respect and all other contingent thereto

Corporations And Associations And Others

CTN :40711010

23 Jun, 2025 1.99 Lacs

Rohtak - Haryana

Tender For replacement of damaged sewerage lines by providing and laying of 225mm id upvc pipe and construction repair of manholes near h.no. 498, 502 and 690 to 698 in sector-6, rohtak and all other works contingent thereto

CTN :40711160

23 Jun, 2025 9.62 Lacs

Jhajjar - Haryana

Tender For providing and fixing of rcc bench at various location

CTN :40684728

03 Jul, 2025 NA

Khorda - Odisha

Tender For supply of measuring steel tape , combination plier insulated , screw driver insulated , electrician screw driver thin stem , heavy duty screw driver insulated , punch centre , knife double bladed electrician , neon tester , steel rule graduated both in metric and english unit , hammer, cross peen with handle , electrical symbol and accessories charts , pipe vice cast iron with hardened jaw open type , hand vice , hacksaw frame - with blade , file flat , file half round , file round , pliers long nose insulated , pliers flat nose insulated , pliers, round nose insulated , d.e. metric spanner double ended , gauge, wire imperial stainless steel , portable electric drill machine , crimping tool , pliers side cutting , wire stripper adjustable length , hammer, ball peen with handle , scriber - knurled centre position , tool kit box or bag portable , allen key - mm , allen key - inch , scissors blade , electrical loads- set of incandescent lamp, tube light, cfl, led light, heater and geyser , wire cutter and stripper , earth plate - copper plate , earth plate - gi plate , earth electrode , tap set , trolley for transportation of batteries , die for threading , electrical wiring and switch gear rack , protective relays and contactors rack , mccb , elcb , rccb , fuses , cables - 1 mtr each , three core wire , battery cable , hacksaw blades , bolts, nuts, washers , solar insulation meter , pyranometer , pyrheliometer , lux meter , magnetic flux meter , temperature controlled soldering iron , sun shine recorder , weather monitoring station , solar cell based sunlight radiation meter , cut models of photo voltaic cell assembly , cut model of lead acid battery , sun path finder , solar energy trainer with grouping of solar cells , solar tracker demonstrator kit , solar pv e-learning software using animations for training , motorized bench grinder , solar photovoltaic module , solar charge controller with dusk to dawn automatic switching , array junction box , solar lantern with suitable solar panel , home light system , solar cell kit , clinometer for angle measurement , anemometer , a.c. voltmeter , volt meter , ammeter mc , ammeter mc centre zero , power factor meter , a.c. energy meter , kilo wattmeter , digital wattmeter , frequency meter , dc led lamp , dc pump , pwm controller , mppt charge controller , solar pcu off grid , solar street light , solar, wind and hybrid power plant , solar traffic light , used water treatment solar plant demonstrator kit , solar dc pump , rechargeable battery , led lights , rubber gloves , cotton gloves , gum boots , safety goggles , safety helmet , first aid kit , working bench , wiring board , metal rack

CTN :40703428

04 Jul, 2025 NA

Pune - Maharashtra

Tender For supply of gi barrel nipple 0.50inch dia 2inch long , gi barrel nipple 0.50inch dia 4inch long , gi barrel nipple 0.50inch dia 6inch long , gi barrel nipple 0.75inch dia 4inch long , gi barrel nipple 0.75inch dia 2inch long , gi barrel nipple 1inch dia 4inch long , gi barrel nipple 1inch dia 6inch long , gi barrel nipple 32 mm 4inch long , gi barrel nipple 32 mm and 6inch long , gi barrel nipple 40 mm dia 4 inch long , gi barrel nipple 40 mm dia 6inch long , gi barrel nipple 50 mm dia 4inch long , gi barrel nipple 50 mm dia 6inch long , gi three way elbow 1.25inch , gi three way elbow 1inch , chrome plated concelled stop cock off cutt 0.75 inch , chrome plated concelled stop cock off cutt 0.50 inch , cp pillar cock off cut 15 mm dia , cp pillar cock 0.50inch dia , cp stop cock angle type 0.50 inch dia heavy duty brass material , cp stop cock 0.50 inch dia two in one or two way heavy duty brass material , cp bib cock 0.50 inch dia off heavy duty , cp bib cock off cut 15 mm dia off cutt with wall flange , cp bib cock 15 mm dia 2 in 1 , cp bib cock 15 mm dia longbody , cp angle stop cock 15 mm dia size 5 no heavy duty , pcv waste coupling 40 mm dia , brass gate valve 1inch dia h d isi marked , brass gate valve 0.75 inch dia h d isi marked , brass gate valve 0.50 inch dia h d isi marked , brass gate valve 1.5 inch dia h d isi marked , brass gate valve 2inch dia h d isi marked , pcv waste coupling 32mm dia , spindle for pillar cock 15 mm no size 5 full cut and half cut two types , spindle for pillar cock 15 mm no size 4 full cut and half cut two types , gi union 50mm , gi union 40mm , gi union 32mm , gi union 20 mm , gi union 25 mm , gi union 15 mm , brass non return valve 40 mm , brass non return valve 50 mm , bibcock 15mm flanger washer two types , bib cock washer 15 mm per pkt 100nos , connection pipe washer per pak 100 nos , gi socket 0.50 inch , gi elbow 0.50 inch , electric wrench machine , pvc europian wc cover white , pvc out let pipe 32 mm 3ft long , handle for flush tank , suction pump for clearing blockage bath or toilet 3inch dia blockage rubber hand pump , geyser connection pipe 0.50 inch dia 2 ft long , geyser connection pipe 0.50 dia 1.5 ft long , suction pipe corrugated green colour 2inch dia , pvc urinal waste pipe , pvc wash basin waste pipe , sintex cover with clamp , sintex tank 500 ltr , sintex tank 1000 ltr , upvc elbow brass 0.75 inch x 0.50 inch dia , pvc elbow 63 mm dia , pvc elbow 75 mm dia , pvc elbow 110 mm dia , upvc socket brass 0.75 x 0.50 mm dia , pvc tee 75 mm dia , pvc y joint 75 mm dia , pvc floor trap 75 mm dia two way , pvc floor trap 75 mm dia , pvc flush tank 10 ltr capacity full set , plastic grip plug 2 inch length , plastic grip wall plug 0.5inch length 100 each , pvc float valve 20mm , pvc pipe 110mm dia 6 mtr long , hdpe black dwc sewerage and drainage 150mm dia 6 mtr long , upvc pipe 40 mm dia 3 m long , pvc pipe 75 mm dia 3 m long , hdpe hose pipe 40m dia , hdpe hose pipe 50m dia , hdpe two side hose groove nipple 40m dia , hdpe two side hose groove nipple 50m dia , hose pipe clamp 1inch dia , hose pipe clamp 2inch dia , hose pipe clamp 40mm dia , u pvc solvet for joints 200 ml , pvc solvet for joints 100 ml , pvc adaptor 63 mm x 50 mm ft mt , pvc elbow cover joint 75 mm dia , pvc elbow cover joint 100 mm dia , pvc clamps 63 mm , pvc clamps 75 mm , pvc clamps 110 mm , pvc connection pipe 15 mm 1.5ft length , pvc flush tank washer , pvc elbow 40 mm , pvc foot valve 50mm , pvc float vaulve , pvc float valve 2inch , high grade stainless steel folding towel rack , glass corner shelf , gland rope 10 mm dia for packing of motor , gland rope 6 mm dia for packing of //bid details 2 / 107 motor , gland rope 12 mm dia for packing of motor , leather washer for footvalve or check valve 150 mm dia , m seal , wc indian type 20inch x 24inch with attached foot rest white or off white colour , wc european type with cover white s trap , health faucet brass body for wall mounted wc hole dia 1.50 cm , hacks

CTN :40714626

27 Jun, 2025 10.00 Lacs

Alwar - Rajasthan

Tender For supply and fixing of rcc benches in various parks in area of ee-iii, uit alwar. (annual contract 2025-26) nit11/2025-26/item4

CTN :40694604

18 Jun, 2025 1.50 Lacs

Bagpat - Uttar Pradesh

Tender For purchase of paking and jointing - paking and jointing [make excel, ferrolite and champion], jointing compressed asbestos fiber jointing sheets for (a) steam - (i) metalic (ii) non metalic (b) high pressure steam - (i) metalic (ii) non metalic (c) red/gray graphited - (i) metalic (ii) non metalic (d) for superheated high pressure steam - (i) metalic (ii) non metalic (e) for oil - (i) metalic (ii) non metalic (f) for acid - (i) metalic (g) in all jointings except the acid - (i) metalic (ii) non metalic, packing: (a) white asbestos yarn (non metalic) (i) 1.6 to 6.0 mm 1/2 kg spools (ii) 1.6 to 6.0 mm 1 kg spools (b) asbestos graphited yarn (i) 1/2 kg spool (ii) 1 kg spool (c) white dry asbestos plated packing (d) asbestos graphited and lubricated packing (non metallic) (e) self lubricating asbestos packing (f) self lubricating asbestos plated packing non metallic graphited (g) ptfe asbestos plated packing (teflon)

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

corporations/Associations/Others

Corporations And Associations And Others

Corporations And Associations And Others