Electronics Tenders

Central Government/Public Sector

CTN :42877122

05 Dec, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of reverse power relay for main switch board , under voltage relay for main switch board , s/t coil 220v ac for air circuit breaker , under votage coil 220v ac for air circuit breaker , cluster contactor for acb , over load relay for avcat panel , phase failure relay 240vac for avcat system , timer 24v dc to 240 v ac 3sec to 6 sec delay for pc crane , timer 24v dc to 240 v ac o. 1 sec to 12 h timer for pc crane , single phase failure vspd1 single phase failure for ac panel , eta d1 electronic meter for ac panel

corporations/Associations/Others

CTN :42997792

22 Dec, 2025 NA

Bangalore - Karnataka

Tender For mechanized/non mechanized housekeeping services at kempegowda bus station, devanahalli trumpet bus station and sports complex (toilets & crew rest room) at shanthinagara of kbs division

CTN :42738530

04 Dec, 2025 8.00 Lacs

Leh - Jammu And Kashmir

Tender For bid to ras corrigendum : supply of virtual reality based drone simulator hardware : : -drone controller , virtual reality headsets , desktop computer , 55 inch display , wifi router

CTN :42986036

09 Dec, 2025 NA

Pune - Maharashtra

Tender For supply of procurement of ied simulated range d d - desktop with software monitoring and controlling ieds with 55 inch 4k screen , rf network infrastructure , wireless transmitter or receiver unit with transponder for per ied , wireless transmitter or receiver unit with gps transponder for per person , single use device incendiary units , wireless ied identification and diffuser units device with a display to verify the mechanism and handling methods against each ied , battery li-ion 5200mah for wireless transmitter or receiver units , chargers , carry boxes , ied mechanisms different triggering , cctv system with nvr for monitoring the activation , preparation of control room , monitoring 55 inch screen , public address system , body cameras , display board of ied mechanism , warranty , amc

State Government

CTN :42971848

18 Dec, 2025 91.81 Lacs

Raichur - Karnataka

Tender For a) scope of work covers supply, installation and commissioning of total 12 nos.of 3d radar level transmitters for the coal level measurement in raw coal bunkers of rtps-unit-5&6 with required pcs, electronic modules, splitters, modems, junction boxes, mounting kit, enclosures, interconnecting cables, software and all other accessories required to make the system complete and fully functional, shall be provided for continuous level measurement and monitoring of level of each coal bunker and also to ensure satisfactory performance of the system commissioned at rtps site which shall be on the basis of single point responsibility, completely covering the activities and services in respect of all the equipment works specified and covered under the specifications. the work involves i) installation and commissioning of 12 nos. 3d radar level type level transmitters with suitable mounting accessories, display indicators, isolators, annunciator, smps, terminals, panel internal wiring, led bulbs, door switch etc. at the bunker level ii)commissioning of rs 485 communication /other cables from bunker level transmitters to the desktop pc at u-5&6 control rooms.iii)commissioning of desktop pcs for 3d multi vision for monitoring of all the 12 bunkers level at u-5&6 control room respectively and also both units bunker levels at pc being installed at chp control room. iv)loading of all the required licenced software to the desktop pc for 3d radar level transmitter and cable routing, glanding, mounting of cable tray, termination and ferruling is in the contractors scope.cable trays will be provided by m/s.kpcl.b)all fabrication works required for installation and commissioning of instruments with jbs,protective cover/canopies and allied works are in contractor/agency scope itself.c) all civil works like drilling/cutting rcc floors,grouting,refilling floors,conduiting under ground cables cable tray mounting, masonary works are in contractor/agency scope itself.d)storage of materials while executing works is single point responsibility of contractor/agency scope itself. e)software details-1. the page containing all bunker level data shall be in full page which must be visible from at least a distance of 6-8mtr .(font size should be more) and shall have a historical trend storage for minimum 45days & real time trend with not less than15min sampling time. f) at chp control room, the existing kpcl pc shall be enabled with bunker level software & shall be communicated through existing lan and as a redundancy the seperate optical fiber cable communication with media convertor has to be provided.the lan cables has to be protected with cable conduit g)materials supply shall be completed in all respect within the stipulated period as per the contract. materials shall be delivered to rtps site through ee(stores)o&m. unloading of materials at rtps site location and shifting of the same to work location is under the contractor/agency scope only. h)handling, shifting, unpacking and erection and commissioning of the entire system shall be under the scope of bidder itself. i)all required consumables, hardware and licenced software, accessories and any other materials which are not included in the scope and required for successful installation and commissioning of the 3d radar level transmitters for the coal level measurement in raw coal bunkers of rtps-unit-5&6 are under the contractor/agency itself. j)all the materials required for the installation and commissioning of 3d radar level transmitters for the coal level measurement in raw coal bunkers of rtps-unit- 5&6 shall be made as detailed under the technical specifications. k)interfacing of all the bunker level transmitters outputs to the desktop pcs at u-5&6 control rooms through rs - 485 communication protocol.(the required 1 pair x 1 sq.mm shielded armoured cables as per requirements shall be supplied approx-500 meters or if more). for more details of scope of work refe

CTN :42303084

03 Dec, 2025 NA

Hisar - Haryana

Tender For bid to ras tender for supply of vehicle and visitor management system : : -desktop rfid reader for visitor mgt system , long uhf based rfid reader for vehicle mgt system , access control system vehicle management hd anpr , access management interface controller card , 6 point 5 feet stainless steel pole for anpr camera and reader device , led based sign board with acrylic sheet for identify cards , 6 u rack with complete accessories for accessories at gate , utp cable cat 6 , pvc pipes with bends for underground wiring work , underground and refilling work , power cable 2 core 1 point 5 sqmm copper , optical fiber cable 6 core unarmoured for control room , ofc fiber patch cord , ofc joint enclosure , 8 port gigabit network switch manageable with 2 sfp ports , sfp module for network switch , led tv 43 inch for display unit , automatic boom barrier 6 meter , management server for database management and vms software , management client software , management vms software , qr based mobile application software for pre registrations of user , vehicle windshield tags , hand held uhf rfid reader , accessories & installation and commissioning of the project for 1 year

Central Government/Public Sector

CTN :42417305

03 Dec, 2025 NA

Angul - Odisha

Tender For bid to ras corrigendum : supply of civil lab equipment d d - impact testing machine , crushing value testing machine , los angeles abrasion testing machine , flakiness index test gauges , elongation index test gauges , aggregate water absorption test set up , pycnometer as per requirement , is sieves for coarse aggregate gi sieves dia 300 mm , is sieves for fine aggregate brass sieves dia 200 mm , automatic sieve shaker 18 inch , bitumen extractor machine , vicat apparatus with deskpot , le-chatlier flasks , le-chatlier moulds , burette as per requirement , measuring cylinders , trowel small , trowel big , trays , sampling scoop , steel buckets as per requirement , cement cube moulds , automatic manual mortar mixer as per requirement , vibrating machine as per requirement , curing tank with controlled temperature , atterberg limits set-up liquid limit , atterberg limits set-up plastic limit , shrinkage limit apparatus with mercury , hydrometer analysis set-up range , free swell index apparatus , proctor testing equipment , core cutter test set up for in-situ density min. 6 mould with 01 hammer , sand replacement test set up for in-situ density , moisture container for omc by conventional method , hot air oven digital , physical balance electronic , rapid moisture meter , thermometer for measurement of room temperature , thermometer for measurement of temperature of bitumen, concrete , digital compression testing machine 2000 kn capacity semi automatic , digital compression testing machine 500 kn capacity , measuring tape 3m , measuring tape 10m , measuring tape 30m , measuring tape 50m , concrete cube moulds , concrete mixer 0.5 cum capacity electrically operated , concrete workability test by compaction factor test , ph meter , paint thickness meter elcometer ultrasonic digital , dial callipers , vernier callipers , digital micrometre , outside micrometres , depth gauge , density pot , density basket , slump test apparatus , electric platform balance 150 kg , electric pan balance 10 kg 1gm , precision balance 600 gm 0.1 gm , measuring flask , upv ultrasonic pulse velocity tester , rebound hammer , core falltering machine , flexural test appratus for beam , core cutting setup for conceret , rebar detector to locate reinforcement before core cutting

CTN :42788733

09 Dec, 2025 NA

Balasore - Odisha

Tender For corrigendum : supply of manjire , snare drum , bass drum , brass band euphonium , saxophone , brass band trumpets , musical instrument clarinet

CTN :42901834

09 Dec, 2025 NA

Coimbatore - Tamil Nadu

Tender For purchase of equipments - purchase of equipment, 1. configuration design an 8-channel battery analyzer and its accessories 2. power 425 w3. voltage measuring range: 25 mv to 5 v, discharge minimum voltage: 0v or better, accuracy: 0.05% of fs4. current range: 0.5 ma to 6 a, accuracy: 0.05% of fs or better 5. power per channel output power: 30w, stability; +/- 0.1% of fs or better6. time rise time: 1ms (0~full range)7. frequency 10hz8. charge mode of operation: cc, cv, cccv, cp end conditions: voltage, current, relative time, capacity.9. discharge mode of operation: cc, cv, cp, cr, end conditions: voltage, current, test time, capacity, energy.10. pulse mode charge: cp mode, cc mode, discharge: cc mode, cp mode, min pulse width: 500ms, automated switch: automated switch from charge to discharge for each pulse end condition: voltage, relative time11. dcir support for the calculation of the point of the dcir12. cycle cycles: 1 65500 or better, steps: 250 or better, nested function: max three levels of loops13. protective function software, power-down data protection, user-defined safety (upper and lower) tolerance of current, voltage, and delay time14. channel features independent pairs of closed loops for the constant current source and constant-voltage source15. test reports and curves for analysis different types of curves created by software based on user definition. (voltage-time curve, current-time curve, capacity-voltage curve, loops times charge/discharge capacity curve, loops times charge/ discharge efficiency curve, etc.), data reports created by the software. comparison of the performance of the batteries tested in channels, both visually and statistically16. channels independent control17. ac input ac 220v 10% / 50hz 18. voltage and current testing sample 4 wire connecting 19. noise 85db20. data management mysql database21. communication means tcp/ip protocol22. data output excel, txt23. communication interface ethernet port24. number of channels per cabinet 825. accessories: 1. bi-potentiostat: electrochemical workstation or moduletechniques the system should be capable of running the rde / rrde technique simultaneously cyclic voltammetry (cv) with simulation/fitting programs linear sweep voltammetry (lsv) with stripping bulk electrolysis with coulometry (be) differential pulse voltammetry (dpv) with stripping normal pulse voltammetry (npv) with stripping tafel plot (tafel), potentiodynamic deactivation, pitting corrosion, corrosion rate, linear polarization, corrosion current, etc. multi-current steps (istep) amperometric i-t curve (i-t) lifetime testing open circuit potential time (ocpt) chrono amperometry (ca) chrono coulometry (cc) chronopotentiometry with current ramp (cpcr) potentiometric stripping analysis (psa) auxiliary signal measurement channel ir compensation external potential input galvanostatic charge discharge single/multiple cycle -chrono potentiometry (cp) with potential limits, polarity by potential or time, no. of cycles etc. voltage vs current density curves single or multiple potential steps with charge limits, single or multiple current steps, mixed voltage/current control using macro. i-v measurements, i max, pmax, fill factor, etc.impedance ac impedance (imp) 10 hz to 3mhz impedance time (impt) (mott-schottky) impedance potential (impe) impedance simulator with fitting open circuit potential time (ocpt)hardware specification of bi-potentiostat workstation/ module: potentiostat / galvanostat module, 2- or 3- or 4-electrode configuration maximum potential: 10v, maximum current: 250 ma peak or better and 2 amps with +/-25 volts for higher current measurement. compliance voltage: > 13v or better, potentiostat rise time: 300 ns or better galvanostat applied current range: 3na to +/- 100ma or better and upto 2 amps applied current accuracy: 20 pa or better input bias current: 1 pa or better cv and lsv scan rate: 0.000001 to 10,000 v/s. ca and cc pulse width: 0.0001 to 1000 sec imp frequency: 0.00001 t

CTN :42339108

10 Dec, 2025 NA

Hyderabad - Telangana

Tender For corrigendum : supply, installation and commissioning of spect dual head gamma camera system for nuclear medicine department of mnjio and rcc with accessories, ( latest model of dual head gamma camera with variable angle facility, spect imaging and whole body imaging capability with high resolution and optimal count sensitivity. )qa , dosimetry items , high dose radioiodine ward with delay tanks , ups with batteries , hvac system/ air conditioning works , electrical works , local items , turnkey and other works with five (5) year warranty ( quote in indian rupees) supply, installation and commissioning of dual head gamma camera spect system, qa and dosimetry items with five year warranty

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

State Government

Central Government/Public Sector