Labour And Manpower Tenders

State Government

CTN :39590744

13 Mar, 2025 1.87 Lacs

Multi City - Telangana

Tender For purchases of tractor mounted road swiper with side brush and water spraying in balkonda assembly constituency

State Government

CTN :39554654

25 Mar, 2025 29.94 Lacs

Delhi - Delhi

Tender For supply of shock dosing - removal of odour, algae, reduction of bod, cod, tss, ph value nitrates, phosphates, up to the parameters as described in the objective of the work by biological treatment by way of bio-remediation using pond & lake cleaner or other equivalent product in solid or liquid form as per manufacturers specification and direction to support life without disrupting the aqua ecology, and to meet the standards of the lake prescribed by is 2296 class d as required for propogation of wild life and fisheries, with further objectives to eradicate all harmful foul smell, mosquito colonies, aquatic weeds, algae etc. at suitable points in the lake i/c removal of floating plant & other material like empty bottles, dead leaves/trees, polythene bags etc. from the lake by fibre boat and clearing the grass from bank/beams around the lake, all complete as per the direction of engineer-in-charge this includes the cost of product, labour and equipment needed for treatment. this product should be non pathogenic, non-hazardous and shall not have any adverse effect on agriculture, aquatic culture, humans, animals and to the environment. the necessary labour shall be deployed to complete all operation such as spraying and dosing, removal of floating plants and other material like trash, empty bottles, dead leaves/tree branches, polythene bags, removal of bio sludge/solids generated during treatment, dredging etc. from the lake/water body. note-1.shock dose (for 10 days) 2. rate shall be inclusive of cost of dosing material, one lab test per month, t&p for dosing / spraying, cleaning of the lake, safely arrangment and adequate manpower required to carry out all the activities. , regular maintenance dosing - removal of odour, algae, reduction of bod, cod, tss, ph value nitrates, phosphates, up to the parameters as described in the objective of the work by biological treatment by way of bio-remediation using pond & lake cleaner or other equivalent product in solid or liquid form as per manufacturers specification and direction to support life without disrupting the aqua ecology, and to meet the standards of the lake prescribed by is 2296 class d as required for propogation of wild life and fisheries, with further objectives to eradicate all harmful foul smell, mosquito colonies, aquatic weeds, algae etc. at suitable points in the lake i/c removal of floating plant & other material like empty bottles, dead leaves/trees, polythene bags etc. from the lake by fibre boat and clearing the grass from bank/beams around the lake, all complete as per the direction of engineer-in-charge this includes the cost of product, labour and equipment needed for treatment. this product should be non pathogenic, non-hazardous and shall not have any adverse effect on agriculture, aquatic culture, humans, animals and to the environment. the necessary labour shall be deployed to complete all operation such as spraying and dosing, removal of floating plants and other material like trash, empty bottles, dead leaves/tree branches , polythene bags, removal of bio sludge/solids generated during treatment, dredging etc. from the lake/water body. note - rate shall be inclusive of cost of dosing material, one lab test per month, t&p for dosing/spraying, cleaning of the lake, safely arrangment and adequate manpower required to carry out all the activities. , providing and placing polyethylene water storage tank, is 12701 marked, with cover and suitable locking arrangement without fittings , "providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings. this includes jointing of pipes & fittings with one step cpvc solvent cement, trenching, refilling & testing of joints complete as per direction of engineer in charge - external work 50 mm nominal outer dia. pipes. " , "providing and fixing chlorinated polyvinyl chloride (c

CTN :39570919

27 Mar, 2025 NA

Multi City - Chhattisgarh

Tender For selection placement agency for supply of labour of different categories (skilled, semi skilled and unskilled)

CTN :39595109

27 Mar, 2025 2.00 Crore

Mumbai - Maharashtra

Tender For providing of hiring of creative agency - optional; web related including web banners radio outdoor campaign banners hoardings signages print ads other creatives; full page half page quarter page advertorials magazine articles; tvc of 60 sec product placement in..

CTN :39562207

17 Mar, 2025 NA

Pune - Maharashtra

Tender For providing of custom bid for services - priestpujari services,custom bid for services - hiring of facility attendant,custom bid for services - maintenance of gym equipments,custom bid for services - hiring of pump operator,custom bid for services - hiring of carpenter and helper,custom bid for services - hiring of music teacher,custom bid for services - hiring of library attendant,custom bid for services - maintenance of aquatic diversity,custom bid for services - hiring of plumber,custom bid for services - high pressure jet cleaning,custom bid for services - sludge removal,custom bid for services - chimney deep cleaning,custom bid for services - liasoning for tree cutting,custom bid for services - cuttingpruning of tree,custom bid for services - coconut removal from tree,custom bid for services - rose bud,custom bid for services - marigold garlands,custom bid for services - decoration of stagegate arch,custom bid for services - loose flower petals for decoration,custom bid for services - tabletop flower arrangement,custom

Central Government/Public Sector

CTN :39562977

14 Mar, 2025 18.88 Lacs

Chandrapur - Maharashtra

Tender For providing of custom bid for services - providing and spraying water on coal transportation road surface by mobile tanker under dsa of chandrapur area retender

Central Government/Public Sector

CTN :39555671

25 Mar, 2025 39.85 Lacs

Patna - Bihar

Tender For providing of custom bid for services - engagement of supporting staff on purely temporary basis through placement agency

Central Government/Public Sector

CTN :39545393

17 Mar, 2025 56.22 Lacs

Sundergarh - Odisha

Tender For dust suppression by spraying of water from mtk to sardega end through wb no 04 to 10 by 20kl water tanker with pressurized pump and nozzles under gocp of basundhara area for 01 year

State Government

CTN :38794157

10 Mar, 2025 34.14 Lacs

Kheda - Gujarat

Tender For corrigendum : supplying and stacking various types of building, road and other construction materials at various palces of taluka mahemdabad under taluka panchayat, mahemdabad under mgnrega ( annual unit rate ) - brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, safeda ballies 125 mm diameter, coal tar, blasting powder, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, unslaked lime, marble dust/ powder, marble chips up to 4 mm and downsize white &black, silicon and acrylic emulsion, moorum, dry distemper, oil bound washable distemper/ acrylic distemper, linseed oil (double boiled), distemper primer, aluminium paint, acid proof paint (chocolate or black), black japan, enamel paint, plastic emulsion paint, water proofing cement paint, black colour dark shade pigment, green or blue medium shade pigment, coarse sand (zone iii), fine sand (zone iv), galvanised steel plain sheets, standard quality hard board sheet 3 mm thick, standard quality hard board sheet 4.5 mm thick, shellac, spirit, mild steel round bar 12 mm dia and below, mild steel round bar above 12 mm dia, average rate of mild steel round bars for reinforcements, twisted steel/deformed bars, structural steel such as tees, angles, channels and r.s. joists, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, safeda ballies 125 mm diameter, coal tar, blasting powder, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, unslaked lime, marble dust/ powder, marble chips up to 4 mm and downsize white &black, silicon and acrylic emulsion, moorum, dry distemper, oil bound washable distemper/ acrylic distemper, linseed oil (double boiled), distemper primer, aluminium paint, acid proof paint (chocolate or black), black japan, enamel paint, plastic emulsion paint, water proofing cement paint, black colour dark shade pigment, green or blue medium shade pigment, coarse sand (zone iii), fine sand (zone iv), galvanised steel plain sheets, standard quality hard board sheet 3 mm thick, standard quality hard board sheet 4.5 mm thick, shellac, spirit, mild steel round bar 12 mm dia and below, mild steel round bar above 12 mm dia, average rate of mild steel round bars for reinforcements, twisted steel/deformed bars, structural steel such as tees, angles, channels and r.s. joists

CTN :39543982

10 Mar, 2025 1.37 Crore

Patna - Bihar

Tender For mr-n- 19-20 pupri-09 - choraut bazar to purandih, clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, construction of subgrade and earthen shoulders :-construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., granular sub-base with well graded material (table 400.1) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., wbm grading 3 (by mechanical means ) :- providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., prime coat (low porosity) :- providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., semi-dense bituminous concrete :- providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of panel concrete, plain cement concrete pavement, thickness as per design over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 m30 (grade), coarse and fine aggregates conforming to is:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days,using curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501, kilometre stone :- reinforc

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government