Refractories Tenders

CTN :42880616

02 Dec, 2025 NA

Jammu - Jammu And Kashmir

Tender For supply of agg 20 mm , aggrigate , black fill compound , bricks , cement bag , cgi sheet , floor tiles , charcoal per kg , colour coated sheet , concrete block , plywood 8 x 3 feet , cutting disc , distemper , green paint , paint og , paint red oxide , paint red , black paint , oil bound distemper , paint yellow , paint brown , paint black , paint colour white , wooden primer , glass putty , hdpe can 35 ltr , hot and cold pipe 450mm , insulation tape , j hook angle small , ldpe film , m seal , nails 3 inch , nut and bolt for srt , pbs roll , pipe 40 mm , peg stay 6 hooks , ppgi sheet 12 feet , precast interlocking , pvc connetion , putty , red oxide primer , syntax 500ltr , syntex tank 1000ltr , tarpaulin , thinner , wall puty , waste pipe , welding rod , white cement , wire mesh 4x20 feet , sand bags

CTN :42880619

02 Dec, 2025 NA

Jammu - Jammu And Kashmir

Tender For supply of cordless drill machine heavy duty voltage of 18 volt , drill machine heavy duty 650w , petrol engine concrete vibrator machine , elect welding machine 220 v , elect iron cutter 14 inch , hy duty metal cutter blade of good quality , heavy duty iron hand cutter , hand grinder blade good quality , tile cutter machine heavy duty , riveting gun machine heavy duty hand held , pipe vise heavy duty make , die set , all type tool kit , pipe wrench 12 inch , pipe wrench 18 inch , pipe wrench 24 inch , pipe wrench 4 inch , hexa blade with frame , brick hammer , water level pipe 0. 75 inch , iron cutter blade 14 inch , iron drill bits all size , iron cutter blade 4 inch , tile cutter blade 4 inch , hand gloves for work good quality , welding rod good quality , nylon rope 12 mm, good quality , plastic tirpal , protection helmet , jute rassi , column frame with nut bolt , shuttering plate 1200 sqft with all accy , nails 2 inch , nails 3 inch , packing timber , dah mark iii , leather gloves , picks 3 kg with handle , phawda with handle , cutting plier , crow bar , shovel , nylone rope 20 mm , nylone rope 10 mm , hdpe sand bag , wire cutter , drill bit set , drill concrete bit 2 to 10 mm , drill star bit , drill magnetic bit , adapter 8 mm , allen key set , chain saw 16 inch , hydraulic concrete mixer machine , heavy duty rock breaker machine , steel gurmala , wooden gurmala , aluminium patti , fish line best quality , water level pipe , sprit level , nylon rope 40 mm , rammer with handle , chiesal , mason trowel , hammer 250 gm , hammer 1 kg , hammer 2 kg , ball pin hammer , steel bucket , sand screen , welding hand screen , plumb bob , aluminium foldable ladder , cgi sheet cutter scissors , centre punches , measuring tape 30 mtr , measuring tape 15 mtr , measuring tape 05 mtr , hexa blade , adjustable 300 mm , adjustable 600 mm , spanner set 6 to 23 , spanner 21 to 23 , spanner 19 to 21 , screw driver set , die set 32 mm , jute rope , earth compactor motor operator , sprit level magnetic , stud , binding wire , swg wire , hand sieve of size 20mm to 60 mm , measuring tube 100 ml to 1000 ml , digital electronic weighing machine , hanging weighing machine upto 500 kg , digital vernier caliper meter , ring wire gauage //bid details2 / 76

State Government

CTN :42868406

01 Dec, 2025 3.35 Lacs

Pondicherry - Pondicherry

Tender For supply of material for the work of construction of fish drying yard for community in panithittu village panchayat in bahour commune of ariyankuppam block puducherry - hire and running charge of loader, hire charges of hydraulic excavator (3d) with driver and fuel, (psr code no.0983 pdy) fine sand (zone iv), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of vibrator ( needle type 40mm), supply of portland cement, (psr code no0295 pdy) supply of stone aggregate (single size) : 20mm nominal size, (psr code no.0982 pdy) supply of coarse sand (zone iii), (psr code no.0293 pdy)supply of stone aggregate : 40mm nominal size, (psr code no.0810a pdy)supply of gravel, (psr code no.0297 pdy) supply of stone aggregate (single size) : 100 mm nominal size, hire charges of wall form panel 1250 x 500 mm for centering, hire charges of corner angle 45 x 45 x 5 mm 1.50 m long for centering, hire charges of 100 mm channel shoulder 2.5 m long for centering, hire charges of double clip (bridge clip) for centering, hire charges of single clip for centering, hire charges of m.s tube 40 mm dia for centering, supply of common burnt clay f.p.s (non modular) brick class designation 3.5, supply of deharadun white lime, supply of bitumen hot sealing compound grade a, supply of flame relardant face inslulating, impregnated fibre board 12 mm thick, providing one number of citizen information board of size 0.90 x 1.20m for community work as per the standard drawing of mord. mgnrega (r.c.c. precast), supply of twisted steel / deformed bars

CTN :42882214

22 Nov, 2025 NA

Multi City - Bihar

Tender For supply of differents meterial for building construction in kaimur forest division, bhabua - local sand , cement , aac : opc , aac : ppc , aac : f2r , aac : hpc , ultra tech : super , ultra tech : premium , ambuja : opc , ambuja : ppc , course sand ( sone sand ) , aggregate/stone chips , dump manure , 20mm , 21mm-44mm , 45mm-64mm , 65mm-90mm , stone dust , surkhi , morrum , red bajri , good earth , sludge , dump manure , screened through sieve of l.s. designation 20 mm , screened through sieve of l.s. designation 16 mm , screened through sieve of l.s. designation 4.75 mm , lime unslaked lime , marble dust / powder , coursed rubble boulder(stone) , coursed rubble bricks ( stone) , bricks : burnt clay modular,class designation 100a , bricks : burnt clay modular,class designation 100b , bricks : burnt clay modular, sleek elevational/exposed finish bricks , bricks : fly ash bricks as per is 12894(2002) & is 3495 , kota stone , 20mm -25mm ( dressed ) , 20mm -25mm ( rough chiselled ) , granite (light color), 18 mm thick , granite (dark colours), 18 mm thick , gi corrugated roof sheet (tata) , ms railling ( any design ) , ss railling grade 304 ( any design ) , tata , jindal , sail , ms square bars , tata , jindal , sail , tmt round bars fe-500d (tata tiscon) , 8mm , 10mm , 12mm , 16mm , 20mm , tmt round bars fe-500d (jindal panther) , 8mm , 10mm , 12mm , 16mm , 20mm , tmt round bars fe-500d (s.a.i.l) , 8mm , 10mm , 12mm , 16mm , 20mm , cement primer , interior primer ( water based ) (asian paints/bergers or similar) , exterior primer ( water based ) (asian paints/bergers or similar) , solvent primer (asian paints/bergers or similar) , wood primer (asian paints/bergers or similar) , steel primer (redoxide ) (asian paints/bergers or similar) , melamine wood sealer (asian paints/bergers or similar) , melamine wood gloss finish (asian paints/bergers or similar) , melamine thinner (asian paints/bergers or similar) , pu wood sealer (asian paints/bergers or similar) , pu wood gloss finish (asian paints/bergers or similar) , pu thinner (asian paints/bergers or similar) , expoxy paint (asian paints/bergers or similar) , enamel paint (asian paints/bergers or similar) , exterior emulsion : premium (asian paints/bergers or similar) , interior emulsion : premium (asian paints/bergers or similar) , acrylic putty (asian paints/bergers or similar) , cement putty , upvc sliding windows : three track , upvc sliding windows : two track , upvc doors: hinged , upvc sliding doors : three track , upvc sliding doors : two track , precast c.c. kerb stone m-25 , precast c.c. kerb stone m-30 , interlocing c.c. paverblock , 60 mm thick, m-30 grade , 60 mm thick, m-35 grade , 80 mm thick, m-30 grade , 80 mm thick, m-35 grade , cpvc pipes , od 15mm dia , od 20mm dia , od 25mm dia , od 32mm dia , od 40mm dia , od 50mm dia , od 65mm dia , od 80mm dia , od 100mm dia , poly propylene- random - co - polymer (ppr) pipes sdr 7.4 , od 16mm dia , od 20mm dia , od 25mm dia , od 32mm dia , od 40mm dia , od 50mm dia , od 63mm dia , od 75mm dia , od 90mm dia , od 110mm dia , od 160mm dia , upvc drainage pipe , od 50mm dia , od 75mm dia , od 110mm dia , np2 class (light duty) r.c.c. pipes , 100mm dia , 150mm dia , 250mm dia , 300mm dia , 450mm dia , 600mm dia , 900mm dia , 1000mm dia , 1200mm dia , np3 class (medium duty) r.c.c. pipes , 450mm dia , 600mm dia , 900mm dia , 1000mm dia , 1200mm dia , 1800mm dia , np4 class (heavy duty) r.c.c. pipes , 450mm dia , 600mm dia , 900mm dia , 1000mm dia , 1200mm dia , 1800mm dia , sandstone slabs , white : 25-30mm (dressed) , white : 40-50mm (dressed) , white : 70-80mm (dressed) , red : 25-30mm (dressed) , red : 40-50mm (dressed) , red : 70-80mm (dressed) , yellow : 25-30mm (dressed) , yellow : 40-50mm (dressed) , yellow : 70-80mm (dressed) , white : 25-30mm (undressed) , white : 40-50mm (undressed) , white : 70-80mm (undressed) , red : 25-30mm (undressed) , red : 40-50mm (undressed) , red : 70-80mm (undressed) , yellow : 25-30mm (un

State Government

CTN :42903892

09 Dec, 2025 25.81 Lacs

Tarn Taran - Punjab

Tender For prov. and laying jointing, testing upvc pipe, specials for distribution system, dismantling of metalled road, brick on edge, interlock tile, household water connection on distribution pipe line and development of water works site, etc.

corporations/Associations/Others

CTN :42485358

03 Dec, 2025 55.80 Lacs

Thiruvananthapuram - Kerala

Tender For supply of digital radiography system type c (qty:10) - digital radiography system 50kw ceiling suspended type, single detector with all accessories as per specifications except the following, x-ray table 6 way floating table, dry imager with 2 online trays, additional detector (rate fixed for three years from the date of price bid opening), light weight lead apron with thyroid gaurd, additional workstation, x-ray trolley table (not taken for evaluation), x-ray table four way (not taken for evaluation), x-ray view box double film (not taken for evaluation), cost of one viewing station (hardware) with necessary software and ups (not taken for evaluation), fully automated full length image stitching on table and vertical bucky necessary hardware and software (not taken for evaluation), 15.12.2:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area beyond 3 sq. metres, 15.12.1:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area 3 sq. metres and below, 15.23.1:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm, 15.3:demolishing r.c.c. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of engineer -in-charge., 15.57:dismantling aluminium / gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by engineer - in-charge, 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar, 15.60:disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved, 2.1.1:earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:all kinds of soil, 50.2.25.1:filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site engineer-in-charge, 2.34.1:supplying chemical emulsion in sealed containers including delivery as specified.chlorpyriphos / lindane emulsifiable concentrate of 20%, 2.35.1.1:diluting and injecting chemical emulsion for post -constructional anti-termite treatment (excluding the cost of chemical emulsion):along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:with chlorpyriphos /lindane e.c. 20% with 1% concentration, 50.4.1.1:providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc., 50.5.33.2:providing and laying in position machine batched and machine mixed design mix m-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of center

corporations/Associations/Others

CTN :42485371

03 Dec, 2025 75.33 Lacs

Thiruvananthapuram - Kerala

Tender For supply of digital radiography system type b (qty:10) - digital radiography system 80kw ceiling suspended type, single detector with all accessories as per specifications except the following, x-ray table 6 way floating table, dry imager with 2 online trays, additional detector (rate fixed for three years from the date of price bid opening), light weight lead apron with thyroid gaurd, additional workstation, x-ray trolley table (not taken for evaluation), x-ray table four way (not taken for evaluation), x-ray view box double film (not taken for evaluation), cost of one viewing station (hardware) with necessary software and ups (not taken for evaluation), fully automated full length image stitching on table and vertical bucky necessary hardware and software (not taken for evaluation), 15.12.2:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area beyond 3 sq. metres, 15.12.1:dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:of area 3 sq. metres and below, 15.23.1:dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm, 15.3:demolishing r.c.c. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of engineer -in-charge., 15.57:dismantling aluminium / gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 metres lead as directed by engineer - in-charge, 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar, 15.60:disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved, 2.1.1:earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:all kinds of soil, 50.2.25.1:filling with contractors own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site engineer-in-charge, 2.34.1:supplying chemical emulsion in sealed containers including delivery as specified.chlorpyriphos / lindane emulsifiable concentrate of 20%, 2.35.1.1:diluting and injecting chemical emulsion for post -constructional anti-termite treatment (excluding the cost of chemical emulsion):along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:with chlorpyriphos /lindane e.c. 20% with 1% concentration, 50.4.1.1:providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) up to floor five level excluding the cost of centering, shuttering, finishing for leveling coarse of floor and roof etc., 50.5.33.2:providing and laying in position machine batched and machine mixed design mix m-20 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of center

CTN :42862759

06 Dec, 2025 NA

Delhi - Delhi

Tender For supply of sfrc railing , brick fps clay , gsb , cement opc43 , rcc bollards 138mm dia , manhole cover hd20 , bituminous bags 25kg , coarse sand zoneiii , aggregate20mm , aggregate10mm , np3 pipe 300mm , np3 pipe 450mm , rcc slab1.50x0.30x0.15mm , rcc slab1.50x0.30x0.10mm , paver block 60mm m35 , tactile tiles , bitumen emulsion

CTN :42864533

26 Nov, 2025 NA

Jind - Haryana

Tender For supply of stone metal, bajri 20mm & 12mm, fine sand, coarse sand, jamna sand, stone dust, isi interlocking paver block m-35 grade in size 40mm thick, 60mm thick & m-40 grade in size 80mm thick and pre-casted rubberized coated colour added tiles of 40mm and 60mm thick, 300mm x 300mm chaqured. (different pattern) coloured floor tiles, pressed steel chowkhat, paneled shutters shisham/hardwood, marandi, flush doors, pvc shutters (flush & pannel), floor/wall tiles (glazed, ceramic, vitrified), floor tiles double charge different sizes, kota stone in different sizes, rcc hume pipe in different, dia, rmc (m-20, m-30) isi tor steel (fe-500) ms girders/joist, fabricated gates/grill/jal/doors/rolling shutters, bathroom fittings and sanitary items, false ceiling of different type, paint asian/ nerolac/berger etc. and white wash, pop, fly-ash bricks, clay bricks, clay tiles for at site

CTN :42816105

21 Nov, 2025 NA

Kawardha - Chhattisgarh

Tender For corrigendum : supply of non authorized suppliers - "ink for inkjet printer (5 ltr. jar)make :- jisl", "wash solution for inkjet printer (1 ltr. pack)make :- jisl", "burnt lime of active available cao content not less than 80% . minimum grid % < 2 and silica & dust free with hand picked quality & packed in air tight hdpe bags.terms & conditions:-1. test certificate from outside laboratory and laboratory should have and affiliation from iso 17025, iso 14001-2015, 45001-2018, iso 9001-2015 certified laboratory.2. iso certificate registration of the laboratory should be enclosed.3. test certificate from outside laboratory where reports issued, registration number should be mentioned.4. test laboratory should be registered from a) occupational health and safety management.b) environmental management system.c) quality management system.5. material safety declaration from manufacture.6. guarantee warrantee certificate.7. udyam certificate of the manufacturer.8. non banned or delisted certificate.9. fitment certificate. 10. make in india clause.make :- only manufacturer (rajsthan lime)", "tissue paper (packet)make - standard quality", "hand lamp with safty guard, 15mtr. cable and socketmake - standard quality", "g.i. backet (10 liter )make - standard quality", ups 1000s, complete electric heater with coil 1500 w, "wooden handle belchamake - standard quality", "coffee mugmake - standard quality", "mug with handle (2 liter)make - standard quality", "thermas (1liter)make - standard quality", "tumbler (glass)make - standard quality", "coconut ropemake - standard quality", "cold vulcanized cement turbo flex cvc -r7 (1 kg pack)make - standard quality", "cross linking agent turbo flex cvc-h7 (100gm pack)make - standard quality", "hand towel cotton napkinemake - standard quality", "towel full size color white size 2ft.x1.5ft.make - standard quality", "sketch pen setmake - standard quality", "door lock 40mmmake - standard quality", "door lock 65mm (double lock)make - standard quality", "kitchen induction cook top black 2000 watt size 34x28x6 cmmake - usha/ prestige/ philips", "aluminium almirah size 3'x6' feet, with locking systemmake - standard quality", "tuffen transparent glass size 100mm dia, thickness 12mmmake - standard quality", "tuffen transparent glass size 150mm dia, thickness 12mmmake - standard quality", "rectangular tuffen transparent glass size 100mmx75mmx8mm thick.make - standard quality", "plastic suction pipe 3"" diamake - standard quality", "tube cleaning of semikestner 2500 sqm, semikestner 1800 sqm, evaporator body of 1500 sqm, 900 sqm, 650 sqm (2 nos.), 250 sqm (2 nos.), juice heater 350 sqm (2 nos.), 260 sqm and 170 sqm (4 nos.). pan of h.s. 277 sqm. (04 nos.), 374 sqm. (01 no.) and continuous pan of h.s. 443 sqm (01 no.).scope of work:- shifting of chemical from store to evaporator body, addition of chemical in to the evaporator body, opening of evaporator body man hole, closing of man hole, shaft and cutter repairing, juice heater opening and closing work, 100% tube cleaning of evaporator body to be done by cutter and brush, schuduled time for cleaning of evaporator body for 2500sq.m - three days, for 1800sq.m - two days, for 1500sq.m - two days, for 900sq.m - one day, for 650sq.m & for 250sq.m - one day, one juice heater every day. cleaning chemical and material will be provided by factory.terms and conditions:-service provider shall have team of experience person of tube cleaning work, service provider should have minimum 2 years similar work experirance of sugar plant, service providers have to arrange their own arrangement of lodging and boarding, service provider should be completely responsible for the safety of their employees and shall take all steps required under the laws or otherwise in this direction, service provider should have service tax registration with gst department. penalty of rs. 5000.00 per day will be imposed on service provider if the work is not completed within the schuduled ti

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

corporations/Associations/Others