Stainless Steel Tenders

Central Government/Public Sector

CTN :39946573

28 Apr, 2025 2.50 Lacs

Udaipur - Rajasthan

Tender For supply of pvc fills honeycomb 600x300x150mm , pvc drift eliminator , pvc branch pipe 63 mm , pvc nozzle 63 mm , pvc nipple 40 mm , pvc end cap 63 mm , frp ceiling compound , gi filling support 10 feet , gi killit , gi nut bolt with washer , ss nut bolt with washer , spencher lock , frp canopy for motor , equalizer 6 inch

Central Government / Public Sector

CTN :39920446

25 Apr, 2025 NA

Haldia - West Bengal

Tender For supply of ss 304 corrugated hose pipe

Central Government / Public Sector

CTN :39937572

23 Apr, 2025 NA

Panipat - Haryana

Tender For supply of fittings from seamless pipe- cs/as/ss for p25 project at iocl panipat refinery

State Government

CTN :39919595

11 Apr, 2025 22.32 Lacs

Fazilka - Punjab

Tender For supplyin and placing furniture in 2 nos temporary courts at judicial court complex abohar - table 8x4 for judgesupplying & placing executive table with credenza unit and pedestal in completely knock down conditions with an overall size 2400mm x 1200mm x 750mm that is to be assembled at site. the worktop shall be 43mm thick having the combination of 18mm pre-laminated particle board with approved laminate and shade as top and 25mm medium density fibre-board as base top. the worktop shall have the size 2400mm x 1100mm having the profile in rectangle shape and the edges (top) shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius and deco paint with half round post form edges along with grooves (base top). the top shall be supported on 4 nos. of ss pipe strips having size 230mm x 60mm x 15mm. the table shall be clad with 48mm thick modesty panel which provide structural support for the table. it should be 48mm thick pre-laminated particle board in linear shape with appropriate pvc edge banding. there shall be buffers provided to avoid to avoid scratches on the floor as well as uneven surfacing. the credenza unit shall have the size 1600mm x 500mm x 670mm. it should be made up of pre-laminated particle board of grade ii of is 12823 with top 25mm thick, drawer base 9mm thick and other parts 18mm thick like shutter, back, facia, side panel etc. it shall have 5 drawer and operated with the assistance of ss handle and easily close & open with roller channel ball bearing channel to enable smooth operation. the drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. pedestal shall be provided with an overall size 400mm x 500mm x 660mm. it should be made up of pre-laminated particle board of grade ii of is 12823. pedestal side, back, facia shall be 18mm thick & drawer base shall be 9mm thick. it shall have 3 nos. of drawer having same size and operated with ss handle and easily close & open with the assistance of roller and ball bearing channel to enable smooth operation. the drawer shall have central locking mechanism in which all the drawer shall be locked with one single key. the pedestal shall be mounted on injection moulded nylon castor. the board used should meet international standard of quality, indian standard is 12823 grade ii should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per is 2380, premium chair for judgessupplying and placing ergonomically designed, comfortable & aesthetically appealing high back chair. the seat shall be made of 15mm thick hot pressed plywood with hr polyurethane foam 50mm thick having density 40kg/m upholstered with black leatherite tapestry with 0.8mm thick and 535 gsm and the back shall be supported by metal insert ms crca chrome plated with hr polyurethane foam 12mm thick having density 23kg/m upholstered with black leatherite with 0.8mm thick and 535 gsm.tthe armrest shall be used cushion arm completely joint with seat and back. the chair shall have synchro tilt revolving mechanism with single position locking and tilt tension adjustment. the pneumatic seat height adjustment for healthy seating, user can adjust seat height upto 120mm with bifma standard class-3 gaslift to suit them using the lever under the seat. the gas-lift mechanism should be tested as per ansi/bifma x5.1-2011 standards. the pedestal shall be made up of ms crca chrome plated having pitch circle dia 700 mm fitted with 5 nos. 50mm twin wheel castors which shall be made of injection moulded black nylon 30% glass filled having self lubricating property for friction free movemen with bifma standards. the seat size shall be 490 10 mm(w)x490 10 mm(d) and back size shall be 640 10 mm(h) from seat & overall height = 1095 10 mm., table for steno/reade

Central Government/Public Sector

CTN :39945723

01 May, 2025 NA

Bhopal - Madhya Pradesh

Tender For bhopal - repairs and maintenance of water pipe line under sse/works/bhopal.

Central Government/Public Sector

CTN :39949792

22 May, 2025 NA

Multi City - Multi State

Tender For supply of set of 37 pin plug (plate mounted) & socket complete, equivalent to m/s sidwal part no. rcac-088 & rcac-089 and fedders lloyd part no. flc-rly-039 and allied part no. ms 3102-r-28-215 for plug & allied part no. ms 3102-r-28-21-p for socket. confirming to rdso specification no. rdso/spec/ac/04 (rev. 3) may-2009 with amendment no. 1. suitable for use in icf type rmpu ac coaches.accepted make: rdso approved make.

Central Government/Public Sector

CTN :39911971

15 Apr, 2025 NA

Mandal - Gujarat

Tender For tmpl/pur/rc/elgi make screw compressorspares/061/338 - consumable spares list, air filter element, oil filter, element separator (e90-160), minimum pressure valve kit, intake valve kit (e132-160), coupling element e90-160, blow down valve kit, pressure transmitter, temperature sensor, air inlet system, nc intake valve 4 inch hpkg-120, ss t bolt clamp jt6a20-dia 170, elbow; rubber 6 , indicator: air filter clog, drive coupling,dia 80/60, a/e pkg gr:1.326 axis 284, connector; pvc hose 3/4", steel reinforced pvc hose 60mm, after and oil cooler assy-e-160, base assembly-e160, bracket - airend, vertical tank e132-e160, hose-3 inch discharge, bracket air filter assy, filter head 360 lpm machining, dia 550 pusher fan 400v, oil return line assembly, exhaust fan 6" sq 220v, pressure regulator prne, ball valve 3, hose set e90-e160 wc (4nos), filter assy. -360 lpm, fan dia. 42" with hub ee160, steel reinforce pvc hose 20mm gre, o/c &a/c assy ee160 alu.coler, tank rec e90-e160 horizone, pipe assy mpv hose to cool, hose assy mpv to cooler, pipe with elbow assy, hose assy 1 1/2 tv to oil out, hose assy tv to oil in, pipe with flange assy, pipe tee assy, hose with metallic bellow 32nb, hose assy airend to tank, hose assy 1 1/2 tank to tee, air end package 1.11: 1, steel reinforce pvc hose 10mm gre, steel reinforce pvc hose 20mm gre, steel reinforce pvc hose 50mm gre, control system of model e90- e160, hex reducing nipple 1/4 (m) x 1/8 (m), pr regulator, tms elbow x (t), tee pipe , tms coupling x (t), hex nipple , connector hose adapter , hose x 1000l (e132-160), tube 2 mts, spares for compressor of model e132- e160, base & drive system, anti vibration mount - e132- e160, cooling and lubrication system 90-160 wc, o ring 54.2 x 47.2 x 3.5, element, therm valve 155 deg, elbow tms 1 x 1 , tee; pipe; npt, pr transmitter 16 bar, 4.20 ma, filter oil, oil filter indicator, nipple; hex; npt, seperator element 1200 cfm, gasket flange 2 for e160-8 bar, mpv with check valve -mpvl65, pr. releif valve, plug, hex 1 npt, oil sight glass, nipple ; pipe; npt x 300, elbow tms x npt, transparent tube 8x6 1.2, coupling; tms; 1/4 x1/8 npt, o ring id 80.0x2.5 thick, hex nipple, tee pipe, pressure switch 0.2-7.5 bar, pressure guage, spares for compressor of model e75-85, consumable spares list, neuron ii, air filter element, oil filter, element seperator, minimum pressure valve kit, intake valve kit, pr. regulator, coupling drive (or) coupling element, pressure transmitter, temperature sensor, hose assy-a/e to tank, blowdown valve kit, actuator kit, oil sight tube6mmx 4mm - 0.5m, ferrule 6 mm, pipe sets dis sys e75-horizon, pipe assy mpv to hose, hose assy mpv to cooler, pipe assy ms to ball valve, discharge hose, hose oil line, fan assy 23 inch, air inlet & control system, 5/8 x m10 bush reducer, intake valve nc, hex nipple x 1/8 npt, pressure regulator, tee branch x npt, tubing 6mm 1.5m, coupling tms x 1/8 npt, connector npt, ss t bolt clamp dia 170, connector rubber 6 , rubber hose duct connector, ss t bolt clamp, elbow npt, elbow tms x npt, temp sensor, discharge system, tms elbow, minimum pressure valve, water seperator, hose mpv out to ac, scavenging line pipe, tms elbow npt, tms elbow, pressure releif valve 1 npt, o ring, hex reducing nipple, assy strainer, tms elbow, hose assy 80 nb, hex plug 1 npt, oil sight glass tube 0.5m, pipe nipple npt, tube nylon 6x4 1.5m, tms elbow, seperator, pressure transmitter, cooling system, oil cooler & after coller assembly, fan motor 2 hp, lubrication system, elbow 1 x m42, pipe tank to tv, tee branch 1 npt, spin on filter, filter head, element thermal valve, housing thermal valve 1 npt, swivel elbow connector 1 npt, pms coupling 1 bsp x 1 od, swivel elbow connector 1 bsp x 1 od, swivel banjo connector m27 x 2, motor and base assembly system, coupling drive, anti vibration mount motor, anti vibration mount airend, recommended spares for e18-e22 & & e30-e7.5 ac 415v for horizon series kit of spares up

corporations/Associations/Others

CTN :39944024

23 Apr, 2025 NA

Tuticorin - Tamil Nadu

Tender For fabrication and supply of 200 nb ss316gr sch 80 seamless pipes and fittings for contact tank c inlet in unit iv and v ash water pump house

State Government

CTN :39946746

22 Apr, 2025 NA

Anantnag - Jammu And Kashmir

Tender For supply of rice wand a grade , basmati rice a grade , rice kashmiri a grade , dal channa a grade , dal rajmash a grade , dal mong a grade , dal cholla a grade , dal matter a grade , channa kabli a grade , black channa , neutree soya bean a grade , masoor dal , haldi powder a grade , chilies powder a grade , shimla mirch fresh , shimla mirch dry , sounf powder and saboot a grade , salt a grade , e-oil a grade , refined oil a grade , ghee a grade , tea kashmiri tea namkeen a grade , tea lipton a grade , baker khani a grade , roti shermal a grade , tailwaroo a grade , double roti bread a grade , roti bandh a grade , lawasa a grade , roti girda a grade , bakery biscuits , sugar a grade , milk toned , milk fresh , curd fresh , butter , aata floura grade , almond fresh , suji a grade , kishmish a grade , kaju a grade , dates a grade , coconut a grade , honey , corn flakes , biscuits , juice , garam masala , meat masala , elaichi kala badi elaie , elaichi sabz , kasori methi , dal chini , pickle a grade , jam mixed a grade , horlics a grade , basil seeds babribyol , poppy seeds khashkhaas , glucose a grade , sharbat rooh i afza a grade , ors electoral prolyte , sweet mix fresh , ice cream rs 20 , meat sheep goat without ugdi , meat sheepgoat with ugdi , cheese paneer punjabi kashmiri , fish punjabi fresh , fish kashmiri fresh , fish trout fresh , eggs a grade , chicken alive chicken meat fresh , knolkhol karam fresh , pallak punjabi kashmiri fresh , radish moli fresh , tomatoes punjabi kashmiri fresh , carrot gajar fresh , potatoes punjabi kashmiri fresh , onion piyaz punjabi kashmiri fresh , phool gobi cauliflower punjabi kashmiri , band gobi cabbage punajbi kashmiri , baigan brinjal punjab kashmiri fresh , green mutter fresh , dhaniya fresh , lahsan garlic punjabi kashmiri fresh , kadoo punjabi kashmiri fresh , shimla mirch per kg fresh , turnip fresh , beans fresh , nadroo per kg fresh , ginger adrak fresh , green chilli fresh , karela fresh , lady finger bhindi fresh , cucumber fresh , capsicum fresh , lemon fresh , apple delicious maharaji american , fresh , bananas fresh , orange nagpuri fresh , mango fresh , grapes fresh , water melon fresh , mask melon fresh , kivi fruit , papiya , pear , pomegratnate , pineaapple fresh , cherry fresh , filling of cooking gas cylinder 14 5 , washing soap powder superior , washing soap superior , bathing soap superior , tooth brush superior , tooth past 100 gm superior , hair oil 200ml coconut oil , hair shampoo 200 grm , hand wash bottle superior , dish wash soap bartan soap , sanitary pads , combs , mirror , soap cases superior , broom big size , first aid kit , sewing charges phern , sweing charges kameez shalwar suit bid details/ 2 / 86

Central Government/Public Sector

CTN :39125624

25 Apr, 2025 8.64 Crore

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : procurement of furniture for married and single accommodation for sailors, dsc personal and civilians along with related facilities and services (under wp-03) at naval station rambilli near visakhapatnam - schedule a part-i (wooden furniture), book case open large(fd-237), chair dining(fd-279), chair wooden bottom w/o arms (fd-285), chair writing(fd-280), chair easy(fd-229), charpoy ip nylon newar with fmn set(fd-227), hot case small (fd-46(m)), notice board 1500x900mm with glass shutter (fd-99(m)), peg table( fd-236), safe meat and milk large(fd-370), side board large (fd-372), sofa set five seater (fd-281), sofa set three seater (fd-281), stool wooden (fd-286), table card 3x3 (fd-288), table center (fd-274), table dining 3x2 without drawer (fd-223), table dining 6 persons (fd-273), table dining 1520x900x760mm (fd-289), table dressing ladies with mirror (fd-251), table pantry (fd-380), table serving 6x3 (fd-411), table writing (fd-275), teapoy (fd-232), tv trolley [fd/e6/map/04(r)], deressing mirror gents (fd/e6/map-ii/16), durrie cotton 12x12(tp), table computer(tp), sub total of schedule "a", part-i, schedule a part-ii(steel furniture), almirah steel large with shelves (fd-1031), almirah steel medium with shelves (fd-1032), almirah small steel glazed (fd-104(m), chair cba steel with hand rest (fd-120m), chair cb with out arms (fd-75m), charpoy folding ip with 12mm ply hard top (fd-388), ladder aluminium 8 long with step (fd-115), rack steel 1530x760x905mm (fd-129m), side rack with tray steel (fd-97m), steel racks 6 tier adjustable (fd-1038), stool steel305x305x760 (fd-81m), table 900x600x760 mm without drawer steel (fd-1007), table with drawer (steel) (900 x 600 x 760mm) (fd-1008), table tabular steel 920x920x760mm (fd-142m), table cook house steel (fd-1019), table office clerks steel (fd-1004), table office for officers steel (fd-1003), form without back (fd-77m), form with back (fd-78m), table center 2 tier (fd-375), charpoy with hard top (fd/map-ii/01), rack shoe steel[fd/e6/map/02(r)], chair varandah (fd/map-ii/06), bed hard [fd/e6/map/08(r)], receptacle pvc (fd/e6/map/13), table bed side [fd/e6/map/15(r)], chair computer (tp), chair steel visitors with hand rest(tp), sub total of schedule "a", part-ii, total amount in figures, quoted amount in words

By Cities

By States

By Agencies

By Ownerships

By Sectors