Telecommunication Services Tenders

Central Government/Public Sector

CTN :37284933

24 Oct, 2024 NA

Delhi - Delhi

Tender For corrigendum : supply of 100 mbps or higher duplex radio , idu indoor unit , antenna dual polarized 2x2 mimo dish antenna with suitable mounting brackets along with essential assys , ethernet switch 8 port , fxo and fxs gateway , stp lan cable cat 6 or better of required length , surge suppressor or lighting protection unit lpu of microwave eqpt , separate chemical earthing for microwave radio link , self supporting towers as per mha approved qrs specifications , installation and commissioning of microwave radio link eqpt along with self supporting towers under consignee locations , camc 1st year , camc 2nd year , camc 3rd year , camc 4th year , camc 5th year

Central Government / Public Sector

CTN :37752680

21 Oct, 2024 NA

Jagatsinghapur - Odisha

Tender For corrigendum : supply of transmitters - temperature , transmitter , lev , tran , guid , wav , radar , 2in , 300 , 0 1500m , pressure transmitter , range 0-10kg/cm2 , t/m , pr , elec , smart , 0-10.00kg/cm2 , , pressure transmitter 0-60 kg/cm2 , pressure transmitter , pressure transmitter , 0 to 200 kg/cm2(g) , transmitter , pr , r 50 to 50 mmwc , pressure transmitter , range 1to plus 2kg/cm2 , pressure transmitter , ff , differential pr t/m , transmitter , dp , elec , ff , dpt , range 0-10000 mmwc , dpt , ff , 1/2 npt , 0 to 10000 mm , smart differential pr t/m , transmitter , dp , elect , ff , temp transmitter , universal , smart type , temp. transmitter ff , range - 0 - 810 degree c , smart remote seal pressure transmitter , t/m , lvl , d/p , diap seal , 3 inch , 600 , rf , 3500mmwc , level tx , dia seal , 4in 300 , ss316 , 5m , 350 , smart remote seal dpt , 2in , 300 , transmiter , dp , elec , hart , pressure transmitter , 0 to-200 kg/cm2(g) , pressure transmitter 0 to 20 kg/cm sq , pressure transmitter , range 1to plus 2kg/cm2 , flow transmitter , 0 to 2500 mmh2o 4 degree c , level transmitter d/p , differential pr transmitter , 0-5000 mmwc

corporations/Associations/Others

CTN :37933729

15 Nov, 2024 NA

Vidisha - Madhya Pradesh

Tender For supply of high mast lighting tower for large area with led flood lighting system

State Government

CTN :37712575

25 Oct, 2024 26.35 Lacs

Alappuzha - Kerala

Tender For corrigendum : deposit work heightening the existing eht towers located at pallipuram for facilitating the construction development activities other installations so as to maintain statutory clearances in favour of ms ksidc

State Government

CTN :37764175

21 Oct, 2024 42.30 Lacs

Bilaspur - Chhattisgarh

Tender For corrigendum : providing annual operation and maintenance work for runway light, taxiway light, sapl light, papi, beacon light, wdi, ldi, perimeter light, watch tower, atc tower & ccr penel etc. at chakarbhatha airport bilaspur (c.g )

State Government

CTN :37921773

22 Oct, 2024 1.60 Lacs

Lucknow - Uttar Pradesh

Tender For gautampalli colony stith aawas no-1 naya se 6 naya me civil anurakshan sambandhi samagri uplabdh karane ke sath anya atiawashyak vibhinn marramati karya. - providing and fixing ball valve brass (brass ) of approved quality , high or low pressure, with plastic floats complete: ( 20 mm nominal bore) 18.18.2, providing and fixing ball valve brass (brass ) of approved quality , high or low pressure, with plastic floats complete: ( 25 mm nominal bore) 18.18.3, providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 15 mm nominal bore ) 18.46.1, providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 25 mm nominal bore ) 18.46.3, providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 32 mm nominal bore ) 18.46.4, providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) non decorative type core of block board construction with frame lst class hard wood and well matched commercial 3 ply veneening with vertical graints or cross brand and face veneers on both faces of shutters. 35 mm thick including isi marked stainless steel butt hinges with necessary screws. dar n0-9.21.1,, providing and fixing fly proof galvanized m.s. wire gauge to windows and clerestory window using wire gauge with average widht of aperture 1.4 mm both directions with wire of dia 0.63 mm all complete with second class teak wood beading 62x19 mm. dar no-9.51.1,, providing and fixing float glass panes 4.0 mm thick (weight not less than 10.00 kg/sqm), (dar-9.7.7.1), providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door widht upto 700 mm), with necessary accessories and screws etc. complete. dar-9.83,, providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 25 mm dia meter. dar-14.28.2,, providing and fixing of uv stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated j or l hooks, bolts & nuts 8 mm dia, g.l. plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. the sheets shall be manufactured out of 2400 tex panel roving incorporating minimum 0.3%, ultra-violet stabiliser in resing system under approximately 2400 psl and hot cured. they shall be of uniform pigmentation and thickness without air pockets and shall conform to is 10192 and is 12866. the sheets shall be opaque or translucent, clear or pigmented textured or smooth as specified. 2 mm thick corrugated (2.5 or 4.2 or 6) or step-down (2 or 3 or 6 ) as specified. dar n0-12.47.1,, providing and fixing isi marked oxidised m.s tower bolt black finish (barrel type) with necessary screws etc complete copper oxidised as per ls 1378, 250x10 mm (dar -9.63.1), providing and fixing bright finished brass lower bolts (barrel type) with necessary screws etc complete. 250x10 mm (dar -9.74.1), providing and fixing bright finished brass lower bolts (barrel type) with necessary screws etc complete. 200x10 mm (dar -9.74.2), providing and fixing toilet paper holder c.p. brass (17.34.1)., providing and fixing chlorinated polyyinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plains & brass threated fittings including fixing the pipe with clamps at 1.00 m spacing. this includes joints of pipe and fitting with one step cpvc solvent cement and the cost of cuttings chases and making good the same including testing of joints complete as per direction of engineer incharge. concealed work. including cutting chases and making good the walls etc. (20mm nominal dia pi

State Government

CTN :37921791

22 Oct, 2024 1.90 Lacs

Lucknow - Uttar Pradesh

Tender For gautampalli colony stith aawas no-1 se 09 me civil anurakshan sambandhi samagri uplabdh karane ke sath anya atiawashyak vibhinn marramati karya. - providing and fixing c.p. brass stop cock (concealed) standerd desingn and approved make conforming to is:8931. 15 mm nominal bore ( 18.52.1), providing and fixing c.p. brass angle valve for basin mixer and geyser points of approved quality conforming to is:8931. 15 mm nominal bore ( 18.53.1), providing and fixing c.p. brass extentsion nipple (size-15x50mm) of approved make and quality as per direction of engineer-in-charge. ( 18.53a), providing and fixing ball valve brass (brass ) of approved quality , high or low pressure, with plastic floats complete: ( 20 mm nominal bore) 18.18.2, providing and fixing ball valve brass (brass ) of approved quality , high or low pressure, with plastic floats complete: ( 25 mm nominal bore) 18.18.3, providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 15 mm nominal bore ) 18.46.1, providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 25 mm nominal bore ) 18.46.3, providing and fixing g.i. union in g.i. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, new work, ( 32 mm nominal bore ) 18.46.4, providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) non decorative type core of block board construction with frame lst class hard wood and well matched commercial 3 ply veneening with vertical graints or cross brand and face veneers on both faces of shutters. 35 mm thick including isi marked stainless steel butt hinges with necessary screws. dar n0-9.21.1,, providing and fixing fly proof galvanized m.s. wire gauge to windows and clerestory window using wire gauge with average widht of aperture 1.4 mm both directions with wire of dia 0.63 mm all complete with second class teak wood beading 62x19 mm. dar no-9.51.1,, providing and fixing float glass panes 4.0 mm thick (weight not less than 10.00 kg/sqm), (dar-9.7.7.1), providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door widht upto 700 mm), with necessary accessories and screws etc. complete. dar-9.83,, providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 25 mm dia meter. dar-14.28.2,, providing and fixing of uv stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated j or l hooks, bolts & nuts 8 mm dia, g.l. plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. the sheets shall be manufactured out of 2400 tex panel roving incorporating minimum 0.3%, ultra-violet stabiliser in resing system under approximately 2400 psl and hot cured. they shall be of uniform pigmentation and thickness without air pockets and shall conform to is 10192 and is 12866. the sheets shall be opaque or translucent, clear or pigmented textured or smooth as specified. 2 mm thick corrugated (2.5 or 4.2 or 6) or step-down (2 or 3 or 6 ) as specified. dar n0-12.47.1,, providing and fixing isi marked oxidised m.s tower bolt black finish (barrel type) with necessary screws etc complete copper oxidised as per ls 1378, 250x10 mm (dar -9.63.1), providing and fixing bright finished brass lower bolts (barrel type) with necessary screws etc complete. 250x10 mm (dar -9.74.1), providing and fixing bright finished brass lower bolts (barrel type) with necessary screws etc complete. 200x10 mm (dar -9.74.2), providing and fixing toilet paper holder c.p. brass (17.34.1)., providing and fixing chlorinated polyyinyl chloride (cpvc) pipes, having thermal stability for hot & c

State Government

CTN :37664037

05 Nov, 2024 9.73 Lacs

Ukai - Gujarat

Tender For corrigendum : preventive/breakdown maintenance contract for 11kv/440 volt ht/lt line, transformer centers, street-lights, high mast towers and cable laying in gsecl/cisf colony at ukai tps.(wt-4792 electrical colony)