Textiles Product Tenders

Central Government/Public Sector

CTN :39950157

21 Apr, 2025 NA

Multi City - Multi State

Tender For supply of front facia/cover complete suitable for lauritz knudsen make air circuit breaker model no. cn-cs800

State Government

CTN :39926915

26 Apr, 2025 NA

Delhi - Delhi

Tender For supply of black rubberized circular dumbbell , black rubberized olympic weight plates , gym exercise mat , tricep rope , tricep rod straight , handle lat pull down , v bar , lat v rowing handle , v bar handle , trap bar or dead lift bar , tricep rod , gym belt , swiss ball , olympic barbell rod , olympic barbell rod five feet , olympic barbell rod four feet , olympic barbell rod four feet ez , battle rope , weighing machine , t bar row holder , gym ball rack , bench , three tier dumbbell rack eight feet in ss

State Government

CTN :39919595

11 Apr, 2025 22.32 Lacs

Fazilka - Punjab

Tender For supplyin and placing furniture in 2 nos temporary courts at judicial court complex abohar - table 8x4 for judgesupplying & placing executive table with credenza unit and pedestal in completely knock down conditions with an overall size 2400mm x 1200mm x 750mm that is to be assembled at site. the worktop shall be 43mm thick having the combination of 18mm pre-laminated particle board with approved laminate and shade as top and 25mm medium density fibre-board as base top. the worktop shall have the size 2400mm x 1100mm having the profile in rectangle shape and the edges (top) shall be sealed with 2mm thick thin strip of impermeable pvc that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius and deco paint with half round post form edges along with grooves (base top). the top shall be supported on 4 nos. of ss pipe strips having size 230mm x 60mm x 15mm. the table shall be clad with 48mm thick modesty panel which provide structural support for the table. it should be 48mm thick pre-laminated particle board in linear shape with appropriate pvc edge banding. there shall be buffers provided to avoid to avoid scratches on the floor as well as uneven surfacing. the credenza unit shall have the size 1600mm x 500mm x 670mm. it should be made up of pre-laminated particle board of grade ii of is 12823 with top 25mm thick, drawer base 9mm thick and other parts 18mm thick like shutter, back, facia, side panel etc. it shall have 5 drawer and operated with the assistance of ss handle and easily close & open with roller channel ball bearing channel to enable smooth operation. the drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. pedestal shall be provided with an overall size 400mm x 500mm x 660mm. it should be made up of pre-laminated particle board of grade ii of is 12823. pedestal side, back, facia shall be 18mm thick & drawer base shall be 9mm thick. it shall have 3 nos. of drawer having same size and operated with ss handle and easily close & open with the assistance of roller and ball bearing channel to enable smooth operation. the drawer shall have central locking mechanism in which all the drawer shall be locked with one single key. the pedestal shall be mounted on injection moulded nylon castor. the board used should meet international standard of quality, indian standard is 12823 grade ii should meet long time load bending, screw-withdrawal strength, modulus of rupture and modulus of elasticity bending tested as per is 2380, premium chair for judgessupplying and placing ergonomically designed, comfortable & aesthetically appealing high back chair. the seat shall be made of 15mm thick hot pressed plywood with hr polyurethane foam 50mm thick having density 40kg/m upholstered with black leatherite tapestry with 0.8mm thick and 535 gsm and the back shall be supported by metal insert ms crca chrome plated with hr polyurethane foam 12mm thick having density 23kg/m upholstered with black leatherite with 0.8mm thick and 535 gsm.tthe armrest shall be used cushion arm completely joint with seat and back. the chair shall have synchro tilt revolving mechanism with single position locking and tilt tension adjustment. the pneumatic seat height adjustment for healthy seating, user can adjust seat height upto 120mm with bifma standard class-3 gaslift to suit them using the lever under the seat. the gas-lift mechanism should be tested as per ansi/bifma x5.1-2011 standards. the pedestal shall be made up of ms crca chrome plated having pitch circle dia 700 mm fitted with 5 nos. 50mm twin wheel castors which shall be made of injection moulded black nylon 30% glass filled having self lubricating property for friction free movemen with bifma standards. the seat size shall be 490 10 mm(w)x490 10 mm(d) and back size shall be 640 10 mm(h) from seat & overall height = 1095 10 mm., table for steno/reade

Central Government/Public Sector

CTN :39911971

15 Apr, 2025 NA

Mandal - Gujarat

Tender For tmpl/pur/rc/elgi make screw compressorspares/061/338 - consumable spares list, air filter element, oil filter, element separator (e90-160), minimum pressure valve kit, intake valve kit (e132-160), coupling element e90-160, blow down valve kit, pressure transmitter, temperature sensor, air inlet system, nc intake valve 4 inch hpkg-120, ss t bolt clamp jt6a20-dia 170, elbow; rubber 6 , indicator: air filter clog, drive coupling,dia 80/60, a/e pkg gr:1.326 axis 284, connector; pvc hose 3/4", steel reinforced pvc hose 60mm, after and oil cooler assy-e-160, base assembly-e160, bracket - airend, vertical tank e132-e160, hose-3 inch discharge, bracket air filter assy, filter head 360 lpm machining, dia 550 pusher fan 400v, oil return line assembly, exhaust fan 6" sq 220v, pressure regulator prne, ball valve 3, hose set e90-e160 wc (4nos), filter assy. -360 lpm, fan dia. 42" with hub ee160, steel reinforce pvc hose 20mm gre, o/c &a/c assy ee160 alu.coler, tank rec e90-e160 horizone, pipe assy mpv hose to cool, hose assy mpv to cooler, pipe with elbow assy, hose assy 1 1/2 tv to oil out, hose assy tv to oil in, pipe with flange assy, pipe tee assy, hose with metallic bellow 32nb, hose assy airend to tank, hose assy 1 1/2 tank to tee, air end package 1.11: 1, steel reinforce pvc hose 10mm gre, steel reinforce pvc hose 20mm gre, steel reinforce pvc hose 50mm gre, control system of model e90- e160, hex reducing nipple 1/4 (m) x 1/8 (m), pr regulator, tms elbow x (t), tee pipe , tms coupling x (t), hex nipple , connector hose adapter , hose x 1000l (e132-160), tube 2 mts, spares for compressor of model e132- e160, base & drive system, anti vibration mount - e132- e160, cooling and lubrication system 90-160 wc, o ring 54.2 x 47.2 x 3.5, element, therm valve 155 deg, elbow tms 1 x 1 , tee; pipe; npt, pr transmitter 16 bar, 4.20 ma, filter oil, oil filter indicator, nipple; hex; npt, seperator element 1200 cfm, gasket flange 2 for e160-8 bar, mpv with check valve -mpvl65, pr. releif valve, plug, hex 1 npt, oil sight glass, nipple ; pipe; npt x 300, elbow tms x npt, transparent tube 8x6 1.2, coupling; tms; 1/4 x1/8 npt, o ring id 80.0x2.5 thick, hex nipple, tee pipe, pressure switch 0.2-7.5 bar, pressure guage, spares for compressor of model e75-85, consumable spares list, neuron ii, air filter element, oil filter, element seperator, minimum pressure valve kit, intake valve kit, pr. regulator, coupling drive (or) coupling element, pressure transmitter, temperature sensor, hose assy-a/e to tank, blowdown valve kit, actuator kit, oil sight tube6mmx 4mm - 0.5m, ferrule 6 mm, pipe sets dis sys e75-horizon, pipe assy mpv to hose, hose assy mpv to cooler, pipe assy ms to ball valve, discharge hose, hose oil line, fan assy 23 inch, air inlet & control system, 5/8 x m10 bush reducer, intake valve nc, hex nipple x 1/8 npt, pressure regulator, tee branch x npt, tubing 6mm 1.5m, coupling tms x 1/8 npt, connector npt, ss t bolt clamp dia 170, connector rubber 6 , rubber hose duct connector, ss t bolt clamp, elbow npt, elbow tms x npt, temp sensor, discharge system, tms elbow, minimum pressure valve, water seperator, hose mpv out to ac, scavenging line pipe, tms elbow npt, tms elbow, pressure releif valve 1 npt, o ring, hex reducing nipple, assy strainer, tms elbow, hose assy 80 nb, hex plug 1 npt, oil sight glass tube 0.5m, pipe nipple npt, tube nylon 6x4 1.5m, tms elbow, seperator, pressure transmitter, cooling system, oil cooler & after coller assembly, fan motor 2 hp, lubrication system, elbow 1 x m42, pipe tank to tv, tee branch 1 npt, spin on filter, filter head, element thermal valve, housing thermal valve 1 npt, swivel elbow connector 1 npt, pms coupling 1 bsp x 1 od, swivel elbow connector 1 bsp x 1 od, swivel banjo connector m27 x 2, motor and base assembly system, coupling drive, anti vibration mount motor, anti vibration mount airend, recommended spares for e18-e22 & & e30-e7.5 ac 415v for horizon series kit of spares up

Central Government/Public Sector

CTN :39946387

28 Apr, 2025 NA

Mumbai - Maharashtra

Tender For supply of cable tie , battery aa alkaline 1 point 5v , telephone cable 4 core flexible , tape insulation 25mm steel grip , battery connection lugs , anti cockroach gel , baygon spray , 9 volt battery , bucket plastic 15 ltrs capacity , araldite adhesive , bucket plastic 20 ltrs capacity , brush steel wire , boric powder , bleaching powder , antirust spray , fiber dust brush , fluorescent tape for night marking of emergency ways , synthetic liquid detergent for industrial purpose , emery cloth abrasive 11 into 9 , cloth emery bs 871 61 grade 1 , cloth bunting red 57 width , cloth bunting green 57 width , clip jubilee 2 , clip jubilee 1 1 by 2 , jubilee clip 1 , cleaning liquid for utensils , cleaning bar for utensils 500 gms , scrub pads 3 into 4 , rags cotton coloured , hand towel , steel cleaning liquid , spin mop set , wiper long handle , brush with long handle , scrubber with handle , refill for automatic air freshner , rat sticking gel , paint brush 4 , paint brush 2 , napthalene balls , plastic mug , spray hand liquid insecticide , mosquito repellent machine with liquid , distilled water , brown sheet , photocopier paper 215mm into 342mm full scape , distemper white , xerox paper 210 into 297mm a4 , paint roller 4 , toilet paper , paint roller 7 , clip jubilee 3 , paint roller 6 , paint roller 9 , tape transparent 1 , synthetic foot mat 3 into 2 , envelope cloth coated 12 into 16 , envelope cloth coated 10 into 14 , envelope cloth coated 9 into 12 , envelope size 10 into 14 , envelope size 6 into 12 , envelope size 4 into 10 , antirust spray , tape transparent 2 bid number/ & ( * ) : gem/2025/b/6119532 dated/ + : 07-04-2025 bid document/ 3 3 1 / 50

Central Government/Public Sector

CTN :39947601

17 Apr, 2025 30.16 Lacs

Begusarai - Bihar

Tender For custom bid for services - barauni monsoon contract 2025 for chp st-1 & st-2-1. provision for the deployment of sufficient nos. of usw /sw to cover the contingent type of work during the rainy season on round the clock operation as directed by the eic or his representative. 2. contractor has to supply manpower as per requirement and direction of eic or his representative, to meet the exigency of rainy season as per following works i) cleaning of chutes in transfer points ii) removal/cleaning of spilled coal in & around the tps due to chute jamming/ overflowing. iii) removal of spilled coal at yard & rail track iv) covering & uncovering of stackyard with ldpe sheets v) handling & transportation of ldpe sheets from store to site & site to store vi)manual yard levelling with the help of belcha & fawda etc. for proper spreading of ldpe sheets vii) any other work as per eic. 3. manpower can be deployed as per plant requirement at chp st-1 & chp st-2 in shift and general shift at any area within plant premises with instruction of eic or his representative, sufficient manpower shall be deployed in usw category in each shift & work have to be carried on all days throughout the contract period including sunday and other holidays as per direction of eic. 4. for removal/cleaning of spilled coal over rail tracks in coal yard area due to heavy rain or any other work related to monsoon exigencies. 5. manpower deployment will be strictly restricted to the actual requirement and direction of eic on short notice. 6. covering of all coal yards with ldpe sheets provided by ntpc, fixing of sheet with coal filled bags & uncovering for reclaiming, stacking & dozering operations. again covering of yards just after finishing of above operations daily round the clock including sunday and g.h. in three shifts & also during rain. 7. each yard require approx. 5000 nos. of new empty cement bags to cover the coal by ldpe sheets. so contractor has to supply 10000 nos. of good quality cement bags to execute the covering of all yards by ldpe sheets during monsoon 10.10: deptt <> man.dep-sw 1. 01 nos manpower shall be deployed in sw category with atleast 2 years experiance for supervision of above works as per boq 10.10 & work has to be carried on all days throughout the contract period including sunday and holidays. agency shall provide 01 no qualified, suitable, and experienced persons as safety supervisor to manage all safety related matter on site relating to the works in accordance with ntpc safety circulars 789 &792. as per boq total man days required is 240 man days. 2. the area supervisor will report to the respective shift charge engineer at the beginning of the shift and deploy manpower to different locations as per the instruction of shift charge engineer. the area supervisor shall remain in contact with sce to execute contingent type of work. 3. supervision for removing spillage coal, clearing of chutes due to jamming of wet coal, coal spillage at rail track. 4. supervision of manual yard levelling before covering of coal with polythene sheets. 5. supervision of uncovering of coal from specified area for reclaiming as per direction of eic/sce & again covering immediately after reclaiming activity. 6. supervision of polythene sheets which are not utilized in yard covering, to be kept at suitable place in folded condition. 7. supervision of covering of coal in all the yards thoroughly especially after stacking or as per instruction of eic or his representative. 8. it will be responsibility of supervisors to get the work done by labours during heavy rain up to the satisfaction of eic/sce. 9. supervision of extinguishing fire in the polythene sheets with water jet round the clock. 10. safety supervisor shall ensure all the safety aspects like use of ppes, torch & hand lamps, permit to work if required & proper isolation of equipments, before start of work and during the work. 11. list o

Central Government And Public Sector

CTN :39954290

14 Apr, 2025 1.70 Lacs

Multi City - Multi State

Tender For maintenance of type iv quarters flat no 06 and flat no 03 at rajeev chowk gurugram sh finishing work , repairs to cupboard , steel section windows , wall tiles , wooden door shutters , door fittings and curtain rods recall.

Central Government/Public Sector

CTN :39930917

11 Apr, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For procurement of furniture items for 22040 and 22043 - l-shaped executive office table.(a) approx. indicative dimensions:w-2000 x d-1400 -900 x h 750mm (b) table top: min. 25 mmthick made of prelaminatedparticle board (c) body: min. 18mm thick and made of prelaminated particle board (d)drawers: (i) min.03 drawers withcentre lock on top (ii) 01 shuttercompartment with lock (iii) 01open shelf. (e) wire managementto be provided item shall bedelivered at admin block of shiprepair complex inside hindustanshipyard limited. supplier shall a, rectangular executive officetable (a) approx. indicativedimensions: w-1500 x d-750xh-750 mm (b) table top: min. 18mm thick and suitable understructure (c) drawers: 3 drawerswith lock on top drawer. (d) wiremanagement to be provided. (e)leveller to be provided for easyadjustment in case of unevenfloor surfaces item shall bedelivered admin block of shiprepair complex inside hindustanshipyard limited. supplier shallassemble the supplied item atlocation as specified by userdepartment, rectangular 4 seater virginhdpe dining table with steelfoldable legs. (a) approx.dimensions: d-750 x w-1500x h-750 mm (b) max. weightwithstand capacity: 100 kgs (c)design: double layered foldable5 foot table (d) material: durablehdpe top & steel legs (e)welding: stud welding & capedbolts for safety (f) mechanism:rust free lock mechanism (g)portability: the table shall beportable and easy to assembleitem shall be delivered adminblock of ship repair complexinside hindustan shi, 2 seater hdpe dining table withsteel foldable legs (a) approx.dimensions: d-450 x w-750 xh-750 mm (b) max. weightwithstand capacity: 75 kgs (c)design: double layered foldable5 foot table (d) material: durablehdpe top & steel legs (e)welding: stud welding & capedbolts for safety (f) mechanism:rust free lock mechanism (g)portability: the table shall beportable and easy to assembleitem shall be delivered adminblock of ship repair complexinside hindustan shipyardlimited. supplie, high back executive officerevolving type chair (a)approximate indicativedimensions: w- 450 mm x d-700mm x h 1150/1250 mm (b) pucushioned seat and back (c) softpu covered arms (d) adjustableseat height mechanism (e)centre tilt mechanism (f) nylonstar base (g) twin wheel nylon, executive mid back revolvingtype office chairs (a) fixed pparm rest (b) push backmechanism (c) adjustable seatheight mechanism (d) smoothand durable nylon casters foreffortless mobility. item shall bedelivered admin block of shiprepair complex inside hindustanshipyard limited. supplier shallassemble the supplied item atlocation as specified by userdepartment., office visitor chair non revolvingtype (a) approx. dimensions:d-450 x w-450 x h-850 (b) framematerial: alloy steel (c) frame: 25mm round with 14 guagethickness (d) finish: black framewith powder coating (e) colour:maroon fabric on seat and & backwith 40 to 45 mm thicknesscushion with good density. itemshall be delivered admin block ofship repair complex insidehindustan shipyard limited.supplier shall assemble thesupplied item at location asspecified by user department, dining chairs with handle: (a)approx. dimensions: d-550 xw-600 x h 850 mm (b) material:poly propylene, robust anddurable item shall be deliveredadmin block of ship repaircomplex inside hindustanshipyard limited. supplier shallassemble the supplied item atlocation as specified by userdepartment

corporations/Associations/Others

CTN :39946354

01 May, 2025 2.14 Crore

Ahmedabad - Gujarat

Tender For tender for supply of clutch disc dia 380 (for clutch- tata 1618/62 bs-iv & 1618/57 , 1618/62 bs vi/obd-ii bs-vi) , clutch cover 380 dia.bs2/3/4/6(for tata 1618/62 bs-iv & 1618/57 , 1618/62 bs-vi/obd-ii bs-vi) , kit pressure spring 330 dia(for clutch- tata 7.5t ultra mini bus bs-iii & bs-iv) , 14 inch clutch assy.with valeo f510 facing(for clutch- ley 4/185 , 4/169 , 4/170 , 4/186 bs-iii & 1611 , 4/197 bs-iv) , clutch repair kit major - four finger. consist of 7 items b1301504 s/a of ret. spring-4 , f0932015 pin eccentric-4 f2461311 cl. plate lever-4 , f2630114 pressure pad-4 , f3646910 cl. spring-12 f0530115 bush for lever-4 , f3531111 bolt spl-4 , b1301504 s/a of ret. spring-4 , f2630114 pressure pad-4 f0932015 pin eccentric-4 , f2461311 cl. plate lever-4 f0530115 bush for lever-4 f3531111 bolt spl-4 (for clutch- ley 4/185 , 4/169 , 4/170 , 4/186 bs-iii & 1611 , 4/197 bs-iv) , clutch repair kit - minor consists of total-40 pin- 4 , bush- 4 , bracket for lever- 8 , spacer -12 , standard screw - hex - m10 x 1.5 cp x 25mm long x gr 8.8 -12(for clutch ley 4/185 , 4/169 , 4/170 , 4/186 bs-iii & 1611 , 4/197 bs-iv) , spring kit-4 fingers con of 2 items(for clutch- ley 4/185 , 4/169 , 4/170 , 4/186 bs-iii & 1611 , 4/197 bs-iv) , release lever service kit (for clutch 380 dia- tata 1618/62 bs-iv & 1618/57 , 1618/62 bs-vi/obd-ii bs-vi) , release lever with eye bolt kit(for clutch hold down bolt 380 dia- tata , 1618/62 bs-iv & 1618/57 , 1618/62 bs-vi/obd-ii bs-vi) , hold down bolt kit (for clutch 380 dia- tata1618/62 bs-iv) , clutch release lever kit (full) 330 dia (for clutch- tata 7.5t ultra mini bus bs-iii & bs-iv) , clutch collector ring(for clutch 380 dia- tata , 1618/62 bs-iv & 1618/57 , 1618/62 bs-vi/obd-ii bs-vi) , pressure spring kit(for clutch pressure spring kit.380 dia- tata , 1618/62 bs-iv & 1618/57 1618/62 bs-vi/obd-ii bs-vi) , clutch release bearing(for clutch- tata 1618/62 bs-iv) , clutch release fork (ratio-2)(for gear box- tata 1618/62 bs-iv & 1618/57 , 1618/62 bs-vi/obd-ii bs-vi) , 352 dia. assy. clutch disc (organic)(for clutch disc- tata 1515/55 bs-iv) , 352 dia. assy. clutch cover(for clutch 1515/55 bs-iv) , pr. plate with needle roller bearing (for clutch- tata 1515/55 bs-iv) , release lever kit (full) 352 dia organic (for tata , 1515/55 bs-iv) , release lever with eye bolt-352 dia organic (for clutch tata , 1515/55 bs-iv) , pressure spring kit 352 dia organic(for clutch- tata , 1515/55 bs-iv) , collector ring- 352 dia organic(for clutch- tata , 1515/55 bs-iv) , clutch release yoke (for clutch- tata 7.5t ultra mini bus bs-iii & bs-iv) , 330 dia clutch disc(for clutch- tata , mini ultra 7.5t bs-iii & bs-iv) , 14 inch rdc clutch cover s/a(four fin. pressure assy)(for clutch- ley 4/185 , 4/169 , 4/186 bs-iii & 1611 , 4/197 bs-iv) , 330 dia diaphragm clutch cover assembly (clutch cover assy. for ley mini ls1508.7t6r bs vi) , 330 dia organic clutch disc assembly with 1.25 inch spline to suit 400nm to 450nm engine torque. (clutch disc for ley mini ls1508.7t6r bs vi) , face plate four finger.(for clutch- ley 4/185 , 4/169 , 4/170 , 4/186 bs-iii & 1611 , 4/197 bs-iv) , cover -clutch 380 diaphragm cover assembly(for clutch ley. vk2011.4t6r , tf 2012.otgr bs-vi / obd-ii bs-vi) , disc - clutch 380 dia organic(for ley. vk2011.4t6r , tf 2012.otgr bs-vi / obd-ii bs-vi) , release bearing - clutch control 1 (for ley mini ls1508.7t6r bs vi ) , clutch bush pin kit - 4 finger con. of 2 items f0530115 bush for lever-4 , f0932015 pin eccentric-4 (for clutch- ley 4/185 , 4/169 , 4/170 , 4/186 bs-iii & 1611 , 4/197 bs-iv) , locking clip clutch release bearing (for leyland vk 2011.4t6r , tf 2012.otgr bs-vi / obd-ii bs-vi) , spring clutch release(for clutch- eicher pro 3008 mini bus bs-iv) , cover assy. clutch(for clutch cover assy.- eicher 3008 mini bus bs-iii & bs-iv) , clutch disc assy. 330 dia(for clutch- eicher pro 3008 mini bus bs-iv) , clutch cover assy. 33

CTN :39899671

15 Apr, 2025 NA

Kochi - Kerala

Tender For corrigendum : procurement of diving items - ref plantspares, tri-glide 50 mm 10-pack, dosage volume selector assy, cp din 7 4m6x16 a4, gauge, rubber tensioner for cover 2-pack, hose holder 2-pack, holder strap w. hook, mp hose nm unf 3/8 715mm, dry suit hose, buoyancy hose, hose nut nm, plug unf 3/8" nm, plug m8x1 nm, plug unf 3/8", safety valve housing, regulator seat 10-pack, hp hose 300 bar 1070 mm, hinge pin 5-pack, hp hose 300 bar 60m, release string 55cm, release handle, black, cover, diffusor, allen key 2.5 mm, storage box, o-ring 52, 0 x 3, 0, pressure gauge assy, canister lid gasket, flow meter 160 lpm, half mask, lumbar weight pocket with weights nonmag, diffusor protection pocket, nonmagnetic regulator unit w. breathing valve, gauge nonmagnetic 300 bar, microphone, o-ring, 30.0x3.0, nbr, nm&oc, 10 x 88941-961, o-ring, 32.2x3.0, nbr, nm&oc, 10 x 88942-961, o-ring, or36,0x2,5, o-ring, or30x3,5, 1 pcs, bracket assembly for pressure gauge, including screw assembl, mask frame, upper, mask frame, lower, torque wrench adapter 11 mm, torque wrench adapter 14 mm, line, waxed, head harness ffm, o-ring, 18.77x1.78, nbr, nm&oc, vulcanizing tape, pressure relief handle, wall, gauge nm, o-ring, 12.42x1.78, fpm, nm&oc, o-ring, 12.42x1.78, fpm, nm&oc, 10 x 99486-901, rip-cord-kit, handle with velcro, over pressure valve, screw rts st 4,8x25 a4, screw rts st 4,8x32 a4, screw rts st 2,9x9,5 a4, screw fts st 4,8x13 a4, screw fts st 4,8x25 a4, screw 5x9, 5 a4, screw mft m6x16 a4, screw mft m5x10 a4 a, screw k6s m3 a4, a.2012 version, b.2008 bersion, screw fts st 3,5x13 a4, screw mft m4x8 a4 b, screw mft m4x8 a4, screw mrt m3x8, screw mrt m3x6 a4, screw mrt m3x8 a4, screw mrt m3x12 a4, screw mft m5x10 a4, screw mft m5x16 a4, regulator seat, hand wheel black air, connection nipple nitrox, o-ring 14, 0 x 2, 4, hip belt assembly, gland nut, non mag, plate nm, is-mix bc large, is-mix bc medium, mouthpiece with hose assy, cr, epdm, nm&oc, plug, locking for lead, o-ring, 18.0x4.0, epdm, nm&oc, sealing washer, d1=35 d2=23 t=1, q, nm&oc 5-pack, backplate locking wedge, inlet filter is mix nm 10-pack, insert m5 nonmagnetic, washer rb 8,4x16x1,6 a4, by-pass arm is-mix nm, o-ring, 6.6x1.6, fpm, nm&oc, o-ring, 3.1x1.6, q, nm&oc, bail-out breathing hose, canister lid assembly, hinge arm, life jacket hose assy compl, o ring 6.75x1.78, fpm, nm & oc, 10.88486-961, connection nipple air, diffusor with connector, weight 1 kg, o-ring, 6,1 x 1,6, storage box a, screw set, bc cover, bc bladder, mouth piece, screw rts st 4.8 x 19af, screw mrt m5 x 16 aa, screw mrt m5x40aa, screw mrt m6 x40 a4, screw mrt m6 x16 a4, screw mrt m6 x16 a4 a

By Cities

By States

By Agencies

By Ownerships

By Sectors