Latest abrasive rail cutter Tenders | Government abrasive rail cutter Tenders

Central Government / Public Sector

CTN :42816584

09 Dec, 2025 NA

Waltair - Andhra Pradesh

Tender For supply of abrasive rail cutter machine as per rdso specification no.tm/sm/01.

Central Government / Public Sector

CTN :42816868

02 Dec, 2025 NA

Hyderabad-T - Telangana

Tender For supply of abrasive rail cutter as per rdso spec no. tm/sm/01 (rev. 02 of 2020)

Central Government / Public Sector

CTN :42817577

08 Dec, 2025 NA

Guntur - Andhra Pradesh

Tender For supply of abrasive rail cutter

State Government

CTN :42777841

20 Nov, 2025 NA

Sambalpur - Odisha

Tender For supply of t & p materials for maintenance- gas cutting set complete with da gas cylinder, oxygen cylinder, regulator, cutting torch and pipe set (extra oxygen cylinder) , magnetic base drill machine professional (rated voltage-220-240v, power input-1200 watt, core cutting capacity-12mm to 50mm, core cutting depth-50mm, rated speed-250/450) (with core bits 8-16) (make: eibenstock / dewalt / bosch) , chopsaw (heavy duty, 220 volt, power input-2300 w, no-load speed-4200 rpm, min peripherial speed-80 m/s, cross cut capacity-45 degree-115mm, cross cut capacity-90 degree-125mm, disc diameter-355mm, disc bore-25.4mm) (make: dewalt / bosch /makita) , pneumatic impact wrench (1/2", 710 w, heavy duty, no load speed-2200 rpm, maximum torque-440n-m with socket set (10-27mm)) (make: bosch / dewalt / stanley / makita) , hand blower with dust extraction (rated input power-820w, volumetric flow rate-4.5 m /min, voltage-230v, no load speed-16000 rpm) (make: bosch / dewalt / stanley) , vacuum cleaner (wet & dry) (power input-1400 w, tank material-stainless steel, vacuum capacity-17 kpa, container capacity-50l) (make: eibenstock / stanley / dewalt / bosch) , pipe bender pipe bending machine hand hydraulic (pipe size 1/2" to 3", force-16 tons) (make: inder/voltz / hellaro) , pneumatic die grinders pneumatic die grinder (inlet pipe size 1/4" with bits, no load speed-30000 rpm, air consumption-339 l/min (average), 680 l/min (actual) and 11.3 l/s (free speed), collect size-6mm (make: chicago pneumatic / dewalt / ingersoll rand /makita) , concrete drill m/c heavy duty sds plus combination hammer with drill bits & chipping bits (2-26mm, 220v, 800w, impact rate at rated speed-0-4000 bpm, rated speed-0-900 rpm (make: bosch / dewalt / stanley) , portable electrode oven (230 vac, temperature-50-300 c, 500 w, capacity-5 kg, type-thermostat (make: esab / d&h / ador/alfa) , large angle grinder (2200 watt, 180mm, 8500 rpm, heavy duty (make: bosch / dewalt /stanley / makita) , angle grinder (900 w, 100mm, no load speed-0-10500 rpm, torque-2.5n-m) (make: metabo/cumi / bosch / dewalt) , torque wrench (drive size-3/4", torque range-200-815 n-m, least count for n-m range-15, swing arc-12.8 degree (make: torque master / taparia) , drill machine (chuck size-13mm, 3000 rpm, 600w) (make: bosch / dewalt / stanley)

State Government

CTN :42779169

15 Dec, 2025 31.11 Lacs

Mumbai - Maharashtra

Tender For three years annual rate contract for supply of spares and consumable items for electrical and mechanical division - three years annual rate contract for supply of spares & consumable items for e&m division, direct mounting pressure gauge 0-10 bar, danfoss differential pressure switch (range 0.2-7.5 bar), indfos differential pressure switch (range 1-10 bar), 22 kg co2 high pressure hose with horn, discharge pipe of abc fire extinguisher, insulation tape (black), teflon tape, rubber gasket sheet 3mm, taps for water purifier, notifier smoke detector fapt-851, notifier manual call point f-mcp-glass, notifier monitor module fmm-1, notifier control module fcm-1, notifier relay module frm-1, notifier fault isolator module iso-x, flasher cum hooter sys-hs, ravel photo & heat multi detector (model.re316sh-2l), float switch 230vac, ip67 with 5-meter inbuilt cable, 2.5 sq mm frls copper wire (r,g,b- 300 mtr each), 4 sq mm frls copper wire (r,g,b- 300 mtr each), 2.5 sq mm frls 3 core copper cable, polish paper (sand paper 120), spray paint (silver,black & red), duracell aa 1.5 volt cell, duracell aaa 1.5 volt cell, digital astronomical timer, digital timer, pin type lug 2.5 sq mm, pin type lug 6 sq mm, pin type lug 1.5 sq mm, ring type lug 6 sq mm, ring type lug 10 sq mm, ring type lug 25 sq mm, ring type lug 4 sq mm, kirloskar foot valve - 150mm spring type, kirloskar foot valve - 80mm spring type, kirloskar foot valve- 65mm spring type, kirloskar foot valve- 100mm spring type, kirloskar foot valve- 75mm spring type, kirloskar foot valve- 40mm spring type, nut & bolt with washer - size m6*20mm, nut & bolt with washer - size m8*20mm, nut & bolt with washer - size m10*30mm, nut & bolt with washer - size m12*50mm, silicon sealant cartridge, drill bit set (hss)- set of 13 bits, concrete drill bit set- set of 5 bits, cable tie 150mm, cable tie 250mm, ceiling fan capacitor 2.5 micro f., exhaust fan capacitor 2 micro f., grinding & cutting wheel 107x1x16mm for ag4 grinding machine, electrical insulated gloves full palm rubberization -1000v resistance non-slip, htc smps-3005 0-30 v, (0-5 a) dc regulated power supply, mk one module blank plate, schneider 6/16 amp modular socket, schneider 6/16 amp modular switch, legrand 6/16 amp modular socket, legrand 6/16 amp modular switch, mk 6/16 amp modular socket, mk 6/16 amp modular switch, 3 module surface box, 3 module modular plate, 1 mm frlsh wire (red), tds meter- isi mark, ip68 (+-0% tolerance), taparia line tester, portable digital weighing machine (150kg), flex quick instant adhesive, 3m double tape (2 mm thick with width 25 mm & length 10 mtr), heavy duty pipe wrench (315 millimetre), pressure gauge with hose, air charging 230volt electric pump (200 psi), dol starter 5hp, gemtax v-belt- no-a1484 lp a/57 belt (for polyhouse fan), gemtax v-belt- no-a1814 lp /a70 belt (for polyhouse fan), gemtax v-belt- no-a76 belt (for polyhouse fan), raval plug 35mm, philips choke for ip 20,33-watt lights, philips 33w light fittings 1 feet x 4 feet, kirloskar nrv 40mm, flg std- bs10d, body ms, disc cs, seat nbr, class pn16, kirloskar nrv 65mm, flg std- bs10d, body ms, disc cs, seat nbr, class pn17, chain wrench 150mm, brush cutter wire (round shape), led 50w driver, input 100-300 vac, output dc56-75v, led 30w driver, input 100-300 vac, output dc30-56v

CTN :42457989

20 Nov, 2025 11.11 Lacs

Multi City - Karnataka

Tender For corrigendum : supplying materials for construction of village santhe katte at shridaragadda - ks-broken stone aggregate 40 mm size, ks-rubble stones, ks-hom of cutting and grinding machine, ks-mechanic class ii/mechanic hmp grade i/eme grade, ks-bond stone 20 x 20 x 45 cm, ks-size stone 20 x 20 x 25 cms, ks-boulders, ks-hom of vibrator 0.71 days, ks-mixer (concrete) - 1 cum capacity, ks-plasticizer / super plasticizer, ks-broken stone aggregate 12 mm to 10 mm size, ks-broken stone aggregate 20 mm size, ks-casurina poles 75 - 100 mm dia, ks-silver oak or equivalent planks 38 mm thick, ks-binding wire, ks-tmt bars fe 500, ks-casurina poles 100 - 150 mm, ks-solid concrete blocks (40 x 15 x 20 cms)-4.00 n/sqmm, ks-vibratory roller 8 tonne, ks-water tanker, ks-gravel 2.36 mm/murrum, ks-plate vibrator having 3 ton compaction force, ks-cobble stones of 60 mm thick, ks-unit cost as per the specification, ks-lime, ks-add watering charges at 1 % on material, ks-whitening, ks-dry distemper, ks-enamel metal paint, ks-painter class i, ks-ready mix primer paint (ready mix red lead paint), ks-expansion bolt, ks-cast iron arrows, ks-m.s. square bright bars 20mm, ks-cast iron ornamental design, ks-ms flat 12 x 75mm, ksa-tools and plants at 2 percent on material, ks-hom of welding and grinding machine, ks-welder grade i, ks-corbon electrodes, ks-rms gusset plate, ks-ms pipes of 80 mm to 100 mm dia, ks-weld mesh 75 x 25 mm of 6g to 10g, ks-cudddapah slab 4 cm thick/shahabad/thandur blue, ks-mixer (concrete small used in culvert), ks-coarse sand (zone iii), ks-portland cement

CTN :42775178

26 Nov, 2025 1.04 Crore

West Kameng - Arunachal Pradesh

Tender For supply of laboratory equipments c c--cbr value digital automatic cbr testing machine with accessories as per is 2720 part 16 , marshal stability automatic analogue marshal stability apparatus 100 kn for 4 inch and 6 inch , moisture content of material infrared moisture meter , digital thermometer minus 50 degree celsius to 280 degree celsius , digital screw gauge , 50 kg capacity electronic balance type accuracy 2 gm , digital electronic balance 5 kg capacity 0 point 50 gm accuracy specification as per uploadedpdf document , laboratory concrete mixer consists of a steel vessel of 30 litres mounted on a frame specification as per uploaded pdf document , vibrating table vibrating tables of table top size 100cm x 100cm plus or mius 10mm specification as per uploaded pdf document , aggregate impact tester , crushing value apparatus , sample tray gi , slump test apparatus , loss angeles abrasion testiing machine with counter , sieve shaker motorised for 20 cm dia sieve with built in digital timer , digital compression testing machine capacity 3000kn conform to is14858 specification as per uploaded pdf document , standard test sieves gi frame a set of 26 different size , standard test sieves brass a set of 35 differencet size , ennore standard sand 50 kgs bag , specific gravity apparatus , speedy moisture meter , bitumen extrator motorized with vaualble speed with digital rpm inidicator , chemical balance 100 gm capacity accuracy 0 point 001 gm , stop watch 1 by 5 sec accuracy , measuring cylinder 100 ml make borosilicate glass , measuring cylinder 500 ml make borosilicate glass , measuring cylinder 1000 ml make borosilicate glass , rain guage automatic recording type with chartconforming to is 5235 , flakiness index thickness gauge specifications as per uploaded pdf document , digital thermometer power source battery specifiction as per uploaded pdf document , cube mould 150 mm made of cast iron specification as per uploaded pdf documents , cube mould 70 point 6mm made of cast iron specification as per uploaded pdf document , le chatelier apparatus for soundness complete set onforming to is 6932 part x , engine core cutting machine , stanone stmh1 type n rebound concrete test hammer , curing tank specification as per uploaded pdf document , sand pouring cylinder apparatus ref standard specifications as per uploaded pdf document //bid details 2 / 32

CTN :42461207

19 Nov, 2025 NA

Jammu - Jammu And Kashmir

Tender For bid to ras proc of tools for str of pds job no 6796 e e - cordless drill machine heavy duty voltage of 18 volt , drill machine heavy duty 650w , petrol engine concrete vibrator machine , elect welding machine 220 v , elect iron cutter 14 inch , hy duty metal cutter blade of good quality , heavy duty iron hand cutter , hand grinder blade good quality , tile cutter machine heavy duty , riveting gun machine heavy duty hand held , pipe vise heavy duty make , die set , all type tool kit , pipe wrench 12 inch , pipe wrench 18 inch , pipe wrench 24 inch , pipe wrench 4 inch , hexa blade with frame , brick hammer , water level pipe 0.75 inch , iron cutter blade 14 inch , iron drill bits all size , iron cutter blade 4 inch , tile cutter blade 4 inch , hand gloves for work good quality , welding rod good quality , nylon rope 12 mm, good quality , plastic tirpal , protection helmet , jute rassi , column frame with nut bolt , shuttering plate 1200 sqft with all accy , nails 2 inch , nails 3 inch , packing timber , dah mark iii , leather gloves , picks 3 kg with handle , phawda with handle , cutting plier , crow bar , shovel , nylone rope 20 mm , nylone rope 10 mm , hdpe sand bag , wire cutter , drill bit set , drill concrete bit 2 to 10 mm , drill star bit , drill magnetic bit , adapter 8 mm , allen key set , chain saw 16 inch , hydraulic concrete mixer machine , heavy duty rock breaker machine , steel gurmala , wooden gurmala , aluminium patti , fish line best quality , water level pipe , sprit level , nylon rope 40 mm , rammer with handle , chiesal , mason trowel , hammer 250 gm , hammer 1 kg , hammer 2 kg , ball pin hammer , steel bucket , sand screen , welding hand screen , plumb bob , aluminium foldable ladder , cgi sheet cutter scissors , centre punches , measuring tape 30 mtr , measuring tape 15 mtr , measuring tape 05 mtr , hexa blade , adjustable 300 mm , adjustable 600 mm , spanner set 6 to 23 , spanner 21 to 23 , spanner 19 to 21 , screw driver set , die set 32 mm , jute rope , earth compactor motor operator , sprit level magnetic , stud , binding wire , swg wire , hand sieve of size 20mm to 60 mm , measuring tube 100 ml to 1000 ml , digital electronic weighing machine , hanging weighing machine upto 500 kg , digital vernier caliper meter , ring wire gauage //bid details 2 / 77

CTN :42461208

19 Nov, 2025 NA

Jammu - Jammu And Kashmir

Tender For bid to ras procurement of tools and plant for str of pds job no 6795 - cordless drill machine heavy duty voltage of 18 volt , drill machine heavy duty 650w , petrol engine concrete vibrator machine , elect iron cutter 14 inch , hy duty metal cutter blade of good quality , heavy duty iron hand cutter , hand grinder blade good quality , tile cutter machine heavy duty with speed of 12000 rpm , riveting gun machine heavy duty hand held , pipe vise heavy duty , die set , pipe wrench , pipe wrench 18 inch , pipe wrench 24 inch , pipe wrench 4 inch , hexa blade with frame , brick hammer , water level pipe , iron cutter blade 14 inch , iron drill bits all size , iron cutter blade 4 inch , tile cutter blade 4 inch , hand gloves for work good quality , welding rod good quality , nylon rope 12 mm , protection helmet , jute rassi , column frame with nut bolt , nails 2 inch , nails 3 inch , packing timber , dah mark iii , leather gloves , picks 3 kg with handle , phawda with handle , cutting plier , crow bar , shovel make , nylone rope 20 mm , nylone rope 10 mm , hdpe sand bag , wire cutter make , drill bit set , drill concrete bit 2 to 10 mm , drill star bit , drill magnetic bit , adapter 8 mm , allen key set , steel gurmala , wooden gurmala , aluminium patti , fish line best quality , water level pipe , sprit level , nylon rope 40 mm , rammer with handle , chiesal , hammer 250 gm , hammer 1 kg , hammer 2 kg , ball pin hammer , steel bucket , sand screen , welding hand screen , plumb bob , aluminium foldable ladder , cgi sheet cutter scissors , centre punches , measuring tape 30 mtr , measuring tape 15 mtr , measuring tape 05 mtr , hexa blade , adjustable 300 mm , adjustable 600 mm , spanner set 6 to 23 , spanner 21 to 23 , spanner 19 to 21 , screw driver set , jute rope , binding wire , swg wire , hand sieve of size 20mm to 60 mm , measuring tube 100 ml to 1000 ml , digital electronic weighing machine , digital vernier caliper meter , ring wire gauage //bid details 2 / 68