Tender For supply of title - stationary valve regulated lead acid batteries, 7 ah (brand: amron or equivalent), for ups smf small size 12 volt lead acid battery, 100 ah, dry charged, volume of electrolyte (ml) -5890, conforming to jisc:8702/1998 (pt-1, 2 & 3) with latest amendments with two years warranty, make-exide, okaya, amron, tata, luminious 12 volt 100 ah smf small size vrla battery conforming to jisc8702/1998(part1, 2&3) with latest amendments. is 16046 warranty of 2 years, warranty and test certificate should be submitted at the time of supply, make:- exide, okaya, amco, uria, amaron, tata, amararaja, material shall besupplied with oem test report, supply of r14 battery cell of 1.5 volts (midium cell) make eveready, nippo, duracell or superior exide class a/64 ah/36 ah 12 volt 15 plates lead acid starter batteries brand: exide/amron or as similar., supply & installation of maintenance free vrla battery 48v/500 ah as per rdso spec no. irs:s 3/96(a). with latest amendment along with battery rack and intercell connectors & necessary low maintenance lead acid secondary cell, each cell 2v 80 ah capacity of 10 hrs, rating at 27 deg. to the end voltage of 1.85 v per cell, each assemble with tubular positive and pasted type megative plate in hard rubber or pp-cp container, connectors and nuts & bolts, dry and uncharged condition, conforming to irs:s:88/2004, revision-1 or latest amendment., stainless steel electric water heater-geyser -as per is 2082: 2018 latest (version-2) tank capacity 15 liter brand: bajaj, usha, havells, v-guard, stainless steel electric water heater-geyser -as per is 2082: 2018 latest (version-2) tank capacity 15 liter brand: bajaj, usha, havells, v-guard. portable straight electric grinder 100 mm single phase, ac supply 50 hz, 800w, 5200 rpm, weight 5.6 kg(approx.) make: bosch, makita, kpt, dewalt, build skill only 100va, 750/110 v ac, single phase, type-iv dry type and air cooled control transformer as per rdso spec: rdso/pe/spec/ac 0203-2020 (rev.0) for non ac lhb coaches. one set consists of 03 iterns: (1) 100va control transformer-01 no. per set, (2) 2a, 500v, 120 ka (gg) fuse of size 10x38 along with fuse holder - 02 nos. per set and (3) f2a, 1.2 kv fuse along with fuse holder - 02 nos. per set. firm should submit test report & certificate of authorization from oem. bee approved and energy efficient open well submersible pump motor set 7.5 kw/10 hp, minimum head 50 m, maximum head 60 m, minimum discharge 500 lpm, maximum discharge 600 lpm, suitable for 3 phase 415 volt 50 hz. ac supply. one year warranty/guarantee with performance chart of pump set to be submitted at the time of offer. make: kirloskar, ksb, cri, & crompton. bee approved and energy efficient open well submersible pump motor set 5 hp, minimum head 42 m, maximum head 50 m, minimum discharge 200 lpm, maximum discharge 400 lpm, delivery size 50 mm, suitable for 3 phase 415 volt 50 hz ac supply. one year warranty/guarantee with performance chart of pump set to be submitted at the time of offer. make: kirloskar, ksb, crompton, & cri., supply and fixing of split air conditioner with inverter technology 1.5 ton this includes supply of 1.5 tr inverter type (variable speed) split air conditioner having eco friendly non cfc refrigerant (as recommended by oem) anti dust filter, iseer 5.0 and above latest bee 5 star rated, latest copper coil confirming is 1391 or latest, rotary compressor suitable for 230v 50hzz a/c supply with minimum 2 mtr copper pipe,minimum 02 meters drainage hose pipe or as per site requirement, complete with all accessories.compressor warranty will be 10years and pcb warranty will be 5 years. make-daiken, whirlpool, panasonic, godrej, lloyd, lg, tong tester (clamp meter digital) hand operated extractor, true rms digital type, specification as per annexure-a attached make/model - meco 25027-auto or equivalent model of fluck or techtest of insize only 250w led luminaries for flood light rated voltage 23
Tender For corrigendum : supply of various pumps mechanical seal, coupling, gland packing and rubber items for bmd-6 500mw utps unit-6.(et-6128 bmd-6) - mechanical seal for m/s.tushaco pumps make air pre heater lub oil pump model:,t3s-25/46 shaft dia-15mm ,rpm:1450, dis pressure : 5 kg/cm2 , fluid:oil servo cycle 680 temp-90?c ,faces: c/sic, hardware in ss316 without gland plate, mechanical seal for m/s.tushaco pumps make i d fan lub oil pump model:,t3s-25/38 shaft dia-15mm ,rpm:1450, dis pressure : 5 kg/cm2 , fluid:oil servo prime 68, temp-90?c ,faces: c/sic, hardware in ss316 without gland plate, mechanical seal for n-pit pump model :wpe/wpil 40/260,shaft dia-44.5mm ,rpm:2900, dis pressure : 10.0kg/cm2 , fluid : water (5 to 11.00 ph value) temp-ambiant , faces: c/ sic, hardware in ss316 along with ss 316/cf8m gland plate, mechanical seal assembly for dm regeneration pump model wp/40/320 of 500mw unit-6, mechanical seal assembly for dm water transfer pump model wp 65/320 for 500 mw, mechanical seal asslly. for flowmore make dm water make up pump fig.k5922 -100 x 80, rubber spider for love joy coupling for l-70, rubber spider (star bush) for love joy coupling l-075, rubber spider (star bush) for love joy coupling l-095, rubber element/ spider for love joy coupling size-l-100, rubber spider for love joy coupling size l-110, rubber spider for love joy flexible coupling size: sw-110, rubber element set for jaw flexible coupling size : swq -226/140, rubber spider (star bush) for love joy coupling l-150, love joy coupling size l-075, lovejoy make jaw- flex coupling with rubber spider, size- l 95 (aluminum), ms love joy coupling l- 100, ms love joy coupling size l-110, love joy make flexible coupling with pilot bore size rrs-110 spacer length 140., jaw flexible coupling size: swq -226/140, moc: cast iron, bore: pilot bore., lovejoy coupling size rrl-150 (c.i.), 100per. neopren rubber diaphragm 25 nb for d.m.plant, 100per. neoprene rubber diaphragm 40 nb for d.m.plant, 100per. neoprene rubber diaphragm 50 nb for d.m plant, neoprene rubber diaphragm for 65 mm r.l.dia valve, neoprene 100 per. pure rubber diaphragm 80 mm, neoprene 100 per. pure rubber diaphragm 100 mm, neoprene 100 per. pure rubber diaphragm 150 mm, 100per. neoprene rubber sheet size 1 mtrx2 mtrx3 mm thick, 100per. neoprene rubber sheet size 1 mtrx2 mtrx5 mm thick, 100per. neoprene rubber sheet,size-1.5 m x 2 m x 2mm thick, oil seal 50 x 68 x 8 mm fenner make, oil seal size 19x32x7 mm, oil seal size:30x50x7 mm, oil seal size 30x40x7 mm, neoprene oil seal size 35 x 47 x 8 mm, oil seal size:35x47x7 mm, oil seal size 45 x 60 x 10 mm fanner/pioneer/sunny, non asbestos, ptfe, graphite gland packing for water application, square in cross section suitable to temparature 280 deg c & pressure 250 bar size :: 6mm, non asbestos, ptfe, graphite gland packing for water application, square in cross section suitable to temparature 280 deg c & pressure 250 bar size :: 8mm, non asbestos, ptfe, graphite gland packing for water application, square in cross section suitable to temparature 280 deg c & pressure 250 bar size :: 10mm, non asbestos, ptfe, graphite gland packing for water application, square in cross section suitable to temparature 280 deg c & pressure 250 bar size :: 12mm, non asbestos, ptfe, graphite gland packing for water application, square in cross section suitable to temparature 280 deg c & pressure 250 bar size :: 16mm, teflon round bar , 300 mm long x 30 mm dia., teflon round bar , 300 mm long x 50 mm dia., teflon round bar , 300 mm long x 80 mm dia.
Tender For corrigendum : scope of work:1. insertion of log gate & screen removal & cleaning.2. preparation and fabrication of necessary arrangement for maintenance of back-up acw, fire hydrant /spray and raw water pumps.3. decoupling of pump and motor, removal of motor skirt and shifting of motor from skirt.4. dismantling of thrust bearing and bearing housing.5. dismantling of complete column pipes, enclosure pipe, shafts, impellers etc.6. complete dismantling of back-up acw, fire hydrant /spray and raw water pumps.7. issue and shifting of spares from store to the site.8. repairing and replacement of worn out parts and d.p. test of spare parts, impellers, shaft and sleeves, bearing housing etc.9. cleaning of all column pipes and enclosure pipe and painting with black paint.10. painting of top column pipe, motor skirt & motor with blue/smoke gray colors. painting of bearing cooling water line and discharge pipe of back-up acw, fire hydrant /spray and raw water pumps with green paints.11. assembly of pump as per oem guideline and shifting of motor on its skirt.12. alignment checking of pump and motor coupling.13. coupling of the pump after motor trial.14. removal of log gate after screen fixing. 15. commissioning of the pump & trail. terms and conditions: 1. the contractor shall have to arrange all men, machine, t&p, consumable, dp test kit including entire qty. of blue/green/ black bituminous paints of shalimar/berger/asian brand at their cost. 2. completion period: within 8 days for each pump from the date of handling over.3. payment terms: 100% payment shall be released after successful overhauling and commissioning of each pump, within 45 days.4. penalty terms: penalty shall be imposed @ rs. 1000/- per day or part thereof due to delay in work but limited to 10% of order value if delay in completing the work.5. mobilization period: firm has to mobilize his team & t&p for start of work within 7days after intimation from engineer-in-charge otherwise penalty @ rs. 500/- per day shall be imposed till start of work.6. guarantee: complete overhauling work is to be guaranteed for minimum 06 months against spurious paints and poor workmanship.7. the contractor will have to provide all necessary safety appliances to his workers engaged and he will be fully responsible for safety of his workers.8. contract period one year. scope of supply(a) cspgcl scope:1. spares of above pumps, fasteners will be provided by cspgcl kw.2. eot crane, compressed air, electricity, water will be provided by cspgcl free of charge.3. workshop facility shall be provided by cspgcl kw.(b) contractors scope:1. all men power, tools tackles, chain pulley block, measuring instrument, welding machine, cutting set, grinders consumable material rustolene, welding electrode, grinding stone, teflon tap, paints etc. shall be arranged by contractor.2. crane operator will be arranged by contractor. executive engineer (tmd-ii, bop) 1x500 mw, cspgcl, htps, kwb
Tender For provision of 100kva diesel generator set and allied works for pump house no 03, mitigation of water logging in ug ops room of nacc, construction of car parking area for flag car at main entrance of officers mess, addn altn to path along perimeter wall at upper cam - provision of 100kva dg set and allied works for pump house no 03, mitigation of water logging in ug ops room of nacc, construction of car parking area for falg car at main entrance of officers mess, addn altn to path along perimeter wall at upper camp, embedded cooler stands at guard post, provn of false ceiling at the entrance of officers mess alongwith all connected items at air force station udhampur
Tender For annual maintenance contract of removal and refitting of submersible pump, roof exhaust fans, boiler seal air fans and acc fans motors at gtps, uran on as and when required basis.
Tender For providing of custom bid for services - operation and maintenance of air conditioning system (chillier plant ahus fcus cooling towers split acs ) and water pump house at ldcp rmp-iii of bhilai steel plant
Tender For supply of nk wind shield glass , nk brake hose , nk timing belt , nk pressure hose assy , dld nnk shop rcp 2 water pump assy , 16220710258 gasket elbow to bypass pipe , nk turbo charger rep kit , nk00010 brake pad , nk000469 oil filter , nk000471 air filter , nk000470 fuel filter , nk differential bearing