Latest acrow span Tenders | Government acrow span Tenders

CTN :40644881

02 Jul, 2025 NA

Tuticorin - Tamil Nadu

Tender For corrigendum : providing of custom bid for services - painting of onshore bunker conveyor structures junction tower structures bunker des utility pipelines hoist structures sprinkler pipelines at stockyard settling pond area conveyor canopies in coal handling system at ntpl

State Government

CTN :40878491

05 Jul, 2025 NA

Aurangabad-Mh - Maharashtra

Tender For corrigendum : material purchasign for construction of one room zp psb and providing basic amanities at village kanhori tq phulambri dist chhatrapati sambhajinagar - laying and jointing pvc pipe. heading, providing and laying cast in situ/ready mix cement concrete m-20 of trap /granite/quartzite/ gneiss metal for r.c.c.beams and lintels as per detailed designs anddrawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (excluding reinforcement and structural steel). with fully automatic micro processor based plc with scada enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand vsi grade), providing and laying cast in situ/ready mix cement concrete m-20 of trap/ granite / quartzite/ gneiss metal for r.c.c. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (excluding reinforcement and structural steel) with fully automatic micro processor based plc with scada enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand vsi grade), providing second class burnt brick masonry with conventional/ i.s. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc.complete, providing and fixing in position tmt-reinforcement of various diameters for t-fe-500 bar r.c.c. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete, providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm lo 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to is 15622-2006 (group bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1.4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete

Corporations And Associations And Others

CTN :40865657

04 Jul, 2025 8.52 Lacs

Delhi - Delhi

Tender For supply of electrical material for day to day use in mvid hospital. - supply of 1.5 sq. mm isi marked, frls pvc insulated, single core copper conductor cable, supply of 2.5 sq. mm isi marked, frls pvc insulated, single core copper conductor cable, supply of 4 sq. mm isi marked, frls pvc insulated, single core copper conductor cable, supply of 6 sq. mm isi marked, frls pvc insulated, single core copper conductor cable, supply of 10 sq. mm isi marked, frls pvc insulated, single core copper conductor cable, 16/0.20 mm (0.5 sqmm) twin circular, frls pvc sheathed, workshop flexible copper cable, supply of 3mm thick phenolic laminated sheet as required, supply of s.p. 5/6 a, one way switch, piano type isi marked, supply of 3 pin 5/6 a socket outlet, piano type isi marked each, supply of s.p. 15/16 a, one way switch, piano type isi marked, supply of 6 pin 15/16 & 5/6 a socket outlet, piano type isi marked, supply of s.p. 5/6 a, one way switch, modular type isi marked, supply of 3 pin 5/6 a socket outlet, modular type isi marked each, supply of s.p. 15/16 a, one way switch, modular type isi marked, supply of 6 pin 15/16 & 5/6 a socket outlet, modular type isi marked, supply of 1200 mm sweep, bee 5 star rated, ceiling fan with brush less direct current (bldc) motor, class of insulation:b, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope,copper winding, power factor not less than 0.9, service value (cm/m/w) minimum 6.00, air delivery minimum 210 cum/min, 350 rpm (tolerance as per is : 374-2019), thd less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75degree c (max.), insulation resistance more than 2 mega ohm, suitable for 230 v, 50hz, single phase ac supply, earthing etc. complete as required., supply of led tube type luminaire 20 watt rating complete with polycarbonate housing batten integrated electronic driver prewired with high efficient leds with the following:(a) total system wattage 20 watt +/- 5%(b )luminous efficacy lumens/watt >=95 (c)power factor >=0.95, supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*10 sqmm, 25 amp modular spmcb, c curve, supply of 3 pole mccb, 125a, 16ka, supply of 3 pole mccb, 200a, 25ka, s/o aluminium lugs for 35 sq. mm cable, supply of following size heavy duty exhaust fan complete with arms, blades ring work on 220/240 volt ac supply etc as required.300 mm, 1400 rpm, s/o aluminium lugs for 25 sq. mm cable, s/o aluminium lugs for 16 sq. mm cable, s/o aluminium lugs for 95 sq. mm cable, s/o aluminium lugs for 120 sq. mm cable, s/o aluminium lugs for 185 sq. mm cable, s/o aluminium lugs for 240 sq. mm cable, s/o of mccb sheet metal enclosure, 4p, 100-125a

Corporations And Associations And Others

CTN :40865660

04 Jul, 2025 9.13 Lacs

Delhi - Delhi

Tender For supply of electrical materials for day to day maintainance of ei in balak ram hospital. - supply of 1.5 sq. mm isi marked, frls pvc insulated, single core copper conductor cable, supply of 2.5 sq. mm isi marked, frls pvc insulated, single core copper conductor cable, supply of 4 sq. mm isi marked, frls pvc insulated, single core copper conductor cable, supply of 6 sq. mm isi marked, frls pvc insulated, single core copper conductor cable, supply of 10 sq. mm isi marked, frls pvc insulated, single core copper conductor cable, 16/0.20 mm (0.5 sqmm) twin circular, frls pvc sheathed, workshop flexible copper cable, supply of 3mm thick phenolic laminated sheet as required, supply of s.p. 5/6 a, one way switch, modular type isi marked, supply of 3 pin 5/6 a socket outlet, modular type isi marked each, supply of s.p. 15/16 a, one way switch, modular type isi marked, supply of 6 pin 15/16 & 5/6 a socket outlet, modular type isi marked, supply of 1200 mm sweep, bee 5 star rated, ceiling fan with brush less direct current (bldc) motor, class of insulation:b, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope,copper winding, power factor not less than 0.9, service value (cm/m/w) minimum 6.00, air delivery minimum 210 cum/min, 350 rpm (tolerance as per is : 374-2019), thd less than 10%, remote or electronic regulator unit for speed control andall remaining accessories including safety pin, nut bolts, washers, temperature rise=75degree c (max.), insulation resistance more than 2 mega ohm, suitable for 230 v, 50hz, single phase ac supply, earthing etc. complete as required., supply of led tube type luminaire 20 watt rating complete with polycarbonate housing batten integrated electronic driver prewired with high efficient leds with the following:(a) total system wattage 20 watt +/- 5%(b )luminous efficacy lumens/watt >=95 (c)power factor >=0.95, supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*10 sqmm, supply of 3 pole mccb, 125a, 16ka, supply of 4 pole mccb,400a, 50ka, s/o aluminium lugs for 35 sq. mm cable, supply of following size heavy duty exhaust fan complete with arms, blades ring work on 220/240 volt ac supply etc as required.300 mm, 1400 rpm, s/o 25 amp modular spmcb, c curve, s/o aluminium lugs for 25 sq. mm cable, s/o aluminium lugs for 16 sq. mm cable, s/o aluminium lugs for 95 sq. mm cable, s/o aluminium lugs for 120 sq. mm cable, s/o aluminium lugs for 185 sq. mm cable, s/o aluminium lugs for 240 sq. mm cable, s/o modular base & cover plate for 1 module, s/o modular base & cover plate for 2 module, s/o modular base & cover plate for 3 module, s/o modular base & cover plate for 4 module, s/o modular base & cover plate for 6 module, s/o modular base & cover plate for 8 module, s/o modular base & cover plate for 12 module, s/o modular bell push, isi marked, s/o stepped type modular fan regulator (2 module), s/o call bell/ buzzer, single phase

State Government

CTN :40756934

02 Jul, 2025 10.04 Lacs

Agartala - Tripura

Tender For supply and installation of some articles to the residential office of the honble deputy speaker, tripura legislative assembly, bardowali, agartala during the year 2025-26 - providing of split type high wall 2.00 tr (rated cooling capacity should not be less than 6,000 kcal/hr or 24000 btu/hr or 7000 kw) split a.c. machine with inverter compressor technology operating on non-cfc refrigerant (r-410a/r-32/equivalent refrigerants) suitable for wall mounting conforming to is:1391 (part-ii) specification (evaporator & condenser must be of pure copper) not less than 3 (three) star rating (latest standard), operates on single phase 230 volt, 50hz, ac supply maximum current drawn 11.0 ampere, including supply of 3.0 mtr copper pipe (both for suction & liquid line), 3.0 mtr 4 (four) core electrical connecting cable, remote control unit in/c batteries, 16 amps power top etc complete, capable of performing a) cooling b) dehumidifying c) air circulation d) filtering as per direction of the engineer-in-charge., standard installation of 1.5 tr/2.00 tr capacity high wall split air conditioner i/c providing of electrical plug top of required capacity, flling up/ repairing of drilled portions by cement mortar, painting etc. as per direction of the engineer-in-charge., fabrication of m.s. platform for placement of condensing unit by using m.s. angle of (50x50x5) mm size base plate, nuts & bolts or cradle of suitable sizes i/c painting, fitting, fixing grouting by cement mixer as per direction of the engineer-in-charge., providing hard pvc pipe of best quality of 25 mm diameter including necessary clamping and fitting for draining of condensate water from indoor unit as per direction of the engineer-in-charge., supply and installation of additional length of copper pipe of suitable diameter for suction and liquid line between indoor and outdoor units (for 1.5 tr & 2 tr ac) beyond the standard length as per direction of the engineer-in-charge. (if required), providing and connecting electric control cables between mcb to indoor/outdoor. 3c x 2.5 sq. mm copper cable., supplying & fixing of 1200 mm sweep white color ac ceiling fan capacitor type double ball bearing complete with 300 mm down rod, canopies, shackles, 3nos blades, including wiring the down rod with 2x1.5 sqmm pvc insulated copper conductor cable(fr) (isi marked, bee 1 star/minimum service value 4.0 m /min/w): -, supplying and fixing of 20 mm dia extra down rod (gi pipe medium guage) with necessary hole for installation of ceiling fan as required., wiring for light/fan/ exhaust fan/ call bell point with 2x1.5 sq. mm pvc insulated copper conductor cable (fr) in pvc conduit (medium gauge) recessed in slab/ walt complete with 6/10 amps modular type switch, cover plate, gl box including necessary connection etc. as required, supplying and fixing of the following modular accessories including necessary connection etc. as required 3/6 pin 16/20 amps socket outlet (2m), supplying and fixing of the following modular accessories including necessary connection etc. as required4 step fan regulator (1m), supplying and fixing of the following modular accessories including necessary connection etc. as required20/25 amps single phase motor starter switch (2m), wiring for circuit/sub-main with the following sizes pvc insulated copper conductor cable (fr) in pvc conduit (medium gauge) recessed in slab/ wall etc. as required, earthing with 40 mm dia g.i. earth pipe (medium gauge) 4.5 m. long complete with masonry enclosure on top cl cover plate size 12"x 12" having locking arrangement including cc work, holes on earth pipe etc. as required, proving and fixing/drawing of 4.06 mm dia (8 swg) g.i. 10 wire on surface or in existing g.j/pvc/ polythene pipe for loop earthing as required., executive desk with return unit, size: 2100(w)x 2250(d) x 750 (h) mm, executive revolving chair, visitor chair, godrej 4 door bookcase (1742 h x 914 wx 320 d) mm

Central Government/Public Sector

CTN :40711581

11 Jul, 2025 85.00 Lacs

Raigad - Maharashtra

Tender For comp maint of dg sets, replacement of filters, avr, canopies, rewinding of alternator, maint of amf panel, lt panel, defective mccb, lt cables alongwith certain road furniture in expl/non expl area nad, tunir, abhimanyu and amn jetty at ns karanja

Central Government/Public Sector

CTN :40695279

10 Jul, 2025 85.00 Lacs

Raigad - Maharashtra

Tender For comprehensive maint of dg sets, replacement of filters, avr, canopies, rewinding of alternators, maint of amf panel, lt panel, defective mccb, lt cables alongwith certain road furniture in ins sandhani, nofra, navy nagar and ayudh vihar at ns karanja

Acrow Span Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Corporations And Associations And Others

Corporations And Associations And Others

State Government

Central Government/Public Sector

Central Government/Public Sector