Get complete information related to latest Acrylic Emulsion Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Acrylic Emulsion Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Acrylic Emulsion Tenders.
Tender For various works in sub tehsil longowal - patwari cabins:-scraping cement outer plaster, scraping cement inner plaster, cement rendering on plaster 1mm thick, 12.5 mm thick cement plaster 1:4, 20mm thick cement paster 1:4, first class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level., 115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1:4 cement mortar in superstructure, 12.5 mm thick cement plaster 1:5, 20mm thick cement paster 1:5, preparation of plastered or concrete surface or painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish, applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface, distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade, finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sq, providing and laying vitrified floor tiles in different sizes in light colour shades made using full body technology (thickness to be specified by the manufacturer) with water absorption s less than 0.08% and conforming to is : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) size 600x600 mm, providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. the tiles should have humidity resistance (rh) of 99%, light reflection > 85%, thermal conductivity k = 0.052 - 0.057 w/m k, fire performance as per (bs 476 pt - 6 &7)in true horizontal level suspended on interlocking t-grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized@120 gsm) comprising of main t runners of 15x32 mm of length 3000 mm, cross t of size 15x32mm of length 1200 mm and secondary intermediate cross t of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter m-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and l-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main t . the system should rest on periphery walls /partitions with the help of gi perimeter wall angle of size24x24x3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall s.s. screws. the exposed bottom portion of all t-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. the work shall be carried out as per specifications, drawings and as per directions of theengineer-in-charge.with 16 mm thick beveled tegular mineral fibre false ceiling tile (nrc 0.55 to 0.6)size 595x595 mm, earth work in excavation in foundations trenches etc. in all kinds of soil where pick-jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres., cement concrete 1:8:16 with stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type, first class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth, base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mix
Tender For supply of item and service - tmgo engine oil ck410w30 bs vi , assy oil filter minus 3 threads , kit-filter element , assy fuel filter delphi , assy tail lamp rh side bs3 by 4 , primary element air filter bs3 by 4 , poly v belt 6pk 1173 lg , cogged v belt 207di bsii , engine mtg assy rh , cotton piece , tmco gear oil 80w90 long life , tmgo ra oil 80w140 long life , kit electric w s washer unit bs1 by 3 by4 , core plug , flanged clinch nut sundaram , gasket intake elbow , sealing washer cu 14 multiply 20 , tata genuine coolant 5 ltrs , tata genuine coolant 1 ltrs , gasket push rod chamber cover , assy tail lamp lh side , check as per pdi checksheet , oil filter replacement including engine oil change , fuel filters , air cleaner replacement cover , renew wiper blades , replacement of tail lamp with all light check up , clutch drive plate remove and install , function test , check engine fast idle , removal and reinstallation of one assy door lock , painting of rusty wheel archbody side denting and painting charges
Tender For tender for supply of supply only graded aggregate 20mm , supply only graded aggregate 40mm , supply only graded aggregate 65mm , supply only coarse sand , supply only boulders 7 cm to 15cm dia , supply only readymade bituminous pothhole patching mix , supply only 400 micron thick hope sheet , 20.5 ft aluminium folding telescopic ladder with two triangle stabilizers , excavation in trenches , removal of surplus soil , returning filling in , s and f in position of gabion box consisting of hexagonal mesh size 100 x100mm , , s and f stone boulders loose filling with aggregates of gauge 80 to 150 mm in gabion box , s and f 150 mm bore pvc pipes , s and f 150 mm bore pvc bends , soil forming embankments , brick work with subclass b bricks , brickwork using retrieved subclass b old size bricks , pcc 1 4 8 type d-2 , pcc 1 3 6 type c-2 , rendering 15mm thick 1 4 , exterior acrylicemulsion paint over exterior water based primer , s and f virified ceramic tiles light shade 10 mm thick , s and f granite polished in steps pillars , plat forms , s and f granite polished for wall lining veneering to wall , dismantling floor , hearth or wall tiling including cement mortar bedding , dismantling of brickwork or stone boulder , taking down cement plaster , demolition of un-reinforced cement concrete
Tender For corrigendum : supplying and stacking various types of building, road and other construction materials at various palces of taluka mahemdabad under taluka panchayat, mahemdabad under mgnrega ( annual unit rate ) - brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, safeda ballies 125 mm diameter, coal tar, blasting powder, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, unslaked lime, marble dust/ powder, marble chips up to 4 mm and downsize white &black, silicon and acrylicemulsion, moorum, dry distemper, oil bound washable distemper/ acrylic distemper, linseed oil (double boiled), distemper primer, aluminium paint, acid proof paint (chocolate or black), black japan, enamel paint, plastic emulsion paint, water proofing cement paint, black colour dark shade pigment, green or blue medium shade pigment, coarse sand (zone iii), fine sand (zone iv), galvanised steel plain sheets, standard quality hard board sheet 3 mm thick, standard quality hard board sheet 4.5 mm thick, shellac, spirit, mild steel round bar 12 mm dia and below, mild steel round bar above 12 mm dia, average rate of mild steel round bars for reinforcements, twisted steel/deformed bars, structural steel such as tees, angles, channels and r.s. joists, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, safeda ballies 125 mm diameter, coal tar, blasting powder, brick bats, wire brush, soft brush, portland cement, white cement, coal (steam), cement concrete jali 50 mm thick, cement concrete jali 40 mm thick, cement concrete jali 25 mm thick, unslaked lime, marble dust/ powder, marble chips up to 4 mm and downsize white &black, silicon and acrylicemulsion, moorum, dry distemper, oil bound washable distemper/ acrylic distemper, linseed oil (double boiled), distemper primer, aluminium paint, acid proof paint (chocolate or black), black japan, enamel paint, plastic emulsion paint, water proofing cement paint, black colour dark shade pigment, green or blue medium shade pigment, coarse sand (zone iii), fine sand (zone iv), galvanised steel plain sheets, standard quality hard board sheet 3 mm thick, standard quality hard board sheet 4.5 mm thick, shellac, spirit, mild steel round bar 12 mm dia and below, mild steel round bar above 12 mm dia, average rate of mild steel round bars for reinforcements, twisted steel/deformed bars, structural steel such as tees, angles, channels and r.s. joists
Tender For supply of restorative architectural services and structural protection services - restoration of external walls balance portion of north side , apply single coat of primer and two coats of acrylicemulsion , refurbishing of ceiling portions of dining hall , apply two coats of wood polish over wooden reapers and wooden rafters , restoration of internal walls training hall and dining room , apply single coat of primer and two coats of acrylicemulsion , admin building and toilet block , painting works , recreational water bodies , excavation , pcc , rr masonry , rcc beams and walls , back filling and consildation , brick masonry works , floor finishes with tiles , waterproofing of pool , pool tiling works , pool maintenance equipment , plumbing works , electrical works including conduits fixing wire pulling switches outlets lights dp and termination , recreational water bodies sitout and canopy , fabrication of structures and frames , ornamental transulacent glass or sheet , installation of structures and glass or sheet , painting , standard kitchen with granite countertop and storage facilities , compound wall refurbishment , ramp and stairs for training room , painting works
Tender For periodical services to certain md accn in the aor of age b/r-i - taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed., m&l for rendering 15mm thick in cm 1:4 using liquid waterproofing compound as per manufacturer instruction on fair faces of brick work or concrete surfaces finished fair & even complete all as specified and directed. note:(wpc will be measured and paid separately), m&l for rendering 15mm thick in cm 1:6 on fair faces of brick work or concrete surfaces of wall finsihed even and smooth with out using extra cement complete all as specified and directed., m&l for rendering 5mm thick in cm 1:3 on fair faces of brick work or concrete surfaces of ceiling finsihed even and smooth with out using extra cement complete all as specified and directed., m&l for preparation on new plastered surface of wall, chajja, parapet etc and applying two coats of cement base paint over one coat of alkali resistant primer complete all as specified and as directed., material & labour for applying two coats of 100% premium acrylicemulsion paint having voc less than 50 gm/litre and uv resistance as per is 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified., material & labour for preparation of new surfaces of plastered walls and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having voc content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturers specification by using electric paint roller or roller brush over and including a coat of primer and 1.0 mm thick white wall care putty (premium quality) over plastered surfaces of walls to prepare the surface even and smooth complete all as specified . ., m&l for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed, supply only liquid water proofing compound complete all as specified and directed., m&l for preparing old decorated plastered or unplasterd surfaces of wall including cornices, pilasters and other wall features etc by brooming down or steel wire brushing and sand paper, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and removing extra wall papdi ,peel off wall papdi by sand paper and making good with putty as per existing thicknes, make the surface even and smooth and also using sander machine (with provision of dust sucking) on uneven surface and applying one coat of white wash on walls with using paint brush complete all as specified and as directed., material and labour for preparation of old decorated surfaces (plastered/unplastered) of ceiling etc by brooming down or steel wire brushing and sand paper, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and removing extra wall papdi ,peel off wall papdi by sand paper and making good with putty as per existing thicknes, make the surface even and smooth and also using sander machine (with provision of dust sucking) on uneven surface and applying one coat of white wash on ceiling surfaces with paint brush complete all as specified and as directed, material and labour for preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by removing / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean, including applying wall care putty where required for filling to depressions/nail holes/light cracks etc and to make the surfa