Latest acve system Tenders | Government acve system Tenders

corporations/Associations/Others

CTN :40126145

05 May, 2025 2.62 Lacs

Pimpri - Maharashtra

Tender For 22/2025-26 purchase of laqshya instruments - purchase of instruments ( laqshay), radiant warmer- technical specification of radiant warmer with baby bassinet a radiant warmer is used to keep the patient s core temperature stable at 37 o c. it should be microprocessor controlled radiant warmer with manual and servo options. it should have facility to display both skin and air (ambient) temperature separately.. it should have audiovisual alarm facility for overheating beyond set temperature range. it should have alarm facility for patient temperature less than or greater than the required temperature i.e. above or below the set range. it should rotate and swivel in different direction, so as to allow taking x-ray. the light should be dazzle free. it should have alarm for power failure. it should have alarm for heater failure and auto cut off for high temp. it should have alarm for probe failure. it should have time out alarm in manual mode. it should have facility to auto reset the system in case of hang up caused by power fluctuation. it should have manual setting for high and low alarm setting. in servo mode, the heater output should be controlled to maintain the baby at the required set temperature. in manual mode, the heater output should be directly controlled by a setting on the front panel should have a facility to lock the keyboard to avoid unwanted user. the desired temperature range from 25 to 40 degree c. the resolution should be 0.1 degree c halogen based observation light should be provided for observing the baby. it should be mounted on a pole with sturdy base with lockable castors power supply: power input to be 220-240 vac, 50hz fitted with indian plug. certificate of calibration and inspection from the factory. warranty: comprehensive warranty for 5 years after warranty documentation: user, technical, maintenance manuals to be supplied ce, iso certified , fetal doppler - technical specification of fetal doppler should be compact, table type and light weight. large lcd display for display of fetal heart rate. back light for better visibility display signal quality, low battery, etc., high sensitivity doppler probe of frequency 2.0 mhz ultra sound intensity 10mw/cm2. built-in speaker with output not less than 1.0w should work on rechargeable batteries with minimum battery time of 300minutes. battery charger and spare set of batteries aa type to be supplied. volume control facility and audio output for ear phone should be available. heart rate range should be from 50 to 240 b pm with accuracy of + /-2% should be water proof body. should have facility for fhr data transfer to pc. doppler probe should be light weight with holder facility when not in use. should be supplied with carrying case. machine should be iso mark, baby digital thermometer - technical specification of baby digital thermometer range 0.1 to 1000 degree centigrade measurement mode- min, max, average, differential, dual temperaturereading measurement unit- degree centigrade, degree fahrenheit,kelvin temperature probe with connecting cable relative humidity10 to 90% rh non-condensing ip rating- ip 40 g) probe response time 2-3 seconds it should be who & unicef standards, delivery trolley/patient stretcher trolley- technical specification of patient stretcher trolley overall size: 1905mm l x 710mm w x 660mm to 910 mm h. stretcher dimension 1830 mm l x 555 mm w. two section top. height adjusted by foot operated maintenance free hydraulic pump. height adjustment shall be obtained by hydraulically operated mono block type linear actuator pump foot operated actuation having stroke of 140 +/- 5 mm, push force 10 kn at 270 bars, number of complete pump stroke 22 to 24 for full stroke length x-ray permeable removable stretcher, backrest raised on ratchet. quick trendelenburg as well as reverse trendelenburg positions shall be provided with easily accessible operating handle provided with two gas springs for easy action. s.s. saline rod with 12 mm dia s.s

corporations/Associations/Others

CTN :40126147

05 May, 2025 2.62 Lacs

Pimpri - Maharashtra

Tender For 22/2025-26 purchase of laqshya instruments - purchase of instruments ( laqshay), radiant warmer- technical specification of radiant warmer with baby bassinet a radiant warmer is used to keep the patient s core temperature stable at 37 o c. it should be microprocessor controlled radiant warmer with manual and servo options. it should have facility to display both skin and air (ambient) temperature separately.. it should have audiovisual alarm facility for overheating beyond set temperature range. it should have alarm facility for patient temperature less than or greater than the required temperature i.e. above or below the set range. it should rotate and swivel in different direction, so as to allow taking x-ray. the light should be dazzle free. it should have alarm for power failure. it should have alarm for heater failure and auto cut off for high temp. it should have alarm for probe failure. it should have time out alarm in manual mode. it should have facility to auto reset the system in case of hang up caused by power fluctuation. it should have manual setting for high and low alarm setting. in servo mode, the heater output should be controlled to maintain the baby at the required set temperature. in manual mode, the heater output should be directly controlled by a setting on the front panel should have a facility to lock the keyboard to avoid unwanted user. the desired temperature range from 25 to 40 degree c. the resolution should be 0.1 degree c halogen based observation light should be provided for observing the baby. it should be mounted on a pole with sturdy base with lockable castors power supply: power input to be 220-240 vac, 50hz fitted with indian plug. certificate of calibration and inspection from the factory. warranty: comprehensive warranty for 5 years after warranty documentation: user, technical, maintenance manuals to be supplied ce, iso certified , fetal doppler - technical specification of fetal doppler should be compact, table type and light weight. large lcd display for display of fetal heart rate. back light for better visibility display signal quality, low battery, etc., high sensitivity doppler probe of frequency 2.0 mhz ultra sound intensity 10mw/cm2. built-in speaker with output not less than 1.0w should work on rechargeable batteries with minimum battery time of 300minutes. battery charger and spare set of batteries aa type to be supplied. volume control facility and audio output for ear phone should be available. heart rate range should be from 50 to 240 b pm with accuracy of + /-2% should be water proof body. should have facility for fhr data transfer to pc. doppler probe should be light weight with holder facility when not in use. should be supplied with carrying case. machine should be iso mark, baby digital thermometer - technical specification of baby digital thermometer range 0.1 to 1000 degree centigrade measurement mode- min, max, average, differential, dual temperaturereading measurement unit- degree centigrade, degree fahrenheit,kelvin temperature probe with connecting cable relative humidity10 to 90% rh non-condensing ip rating- ip 40 g) probe response time 2-3 seconds it should be who & unicef standards, delivery trolley/patient stretcher trolley- technical specification of patient stretcher trolley overall size: 1905mm l x 710mm w x 660mm to 910 mm h. stretcher dimension 1830 mm l x 555 mm w. two section top. height adjusted by foot operated maintenance free hydraulic pump. height adjustment shall be obtained by hydraulically operated mono block type linear actuator pump foot operated actuation having stroke of 140 +/- 5 mm, push force 10 kn at 270 bars, number of complete pump stroke 22 to 24 for full stroke length x-ray permeable removable stretcher, backrest raised on ratchet. quick trendelenburg as well as reverse trendelenburg positions shall be provided with easily accessible operating handle provided with two gas springs for easy action. s.s. saline rod with 12 mm dia s.s

Central Government/Public Sector

CTN :40025576

28 Apr, 2025 NA

Mumbai - Maharashtra

Tender For bid to ras providing of integrated security surveillance system service - health monitoring solution for cctv system; network attached storage; high media quality; buyers premises; rule-based access control system (rbac); biometric; personnel and environmental safety; full..

Central Government/Public Sector

CTN :39885287

28 Apr, 2025 17.70 Lacs

Ganjam - Odisha

Tender For corrigendum : providing of integrated security surveillance system service - supply, installation and commissioining of cctv surveillance system at msp as per scope of work; capture devices; high media quality; buyers premises; role-based access control system (rbac); na; na;..

State Government

CTN :40072880

13 May, 2025 NA

Basti - Uttar Pradesh

Tender For supply of material and erection of equipments and structure for construction of 01 no. 132/33kv bay at 132kv sub-station harraiya under electricity transmission division-i, basti - supply, pale fencing, earthing 40 mm ms rod for main earthing, earthing 40 mm ms electrodes ( 3 meter longs), m.s. flat for earthing 75x10, m.s. flat for earthing 50x6, air conditioning system, two ton window ac with all accessories and stabilizer(not less than 5kva capacity) with installation, single tension fitting suitable for, acsr moose, acsr panther, single suspension fittings suitable for, acsr moose, acsr panther, pg clamp suitable for, moose/ moose, moose/panther, panther/panther, bus post clamp suitable for, panther, twin panther, moose, lightening fixture led luminaries type sl-di as per tech specifications, work, erection of main & auxiliary structure consisting of column. beam peak, mast etc and auxiliary structure of installation of cts, la etc. the job consists of shifting of all materials from store to site of erection and erection of structures as per drawing with the help of gi nut & bolts, flat & spring washer with matching the hole, cutting & matching of member if required, including cost of all men and t&p excluding gi structure nut & bolts to complete the work. gi structures, nut & bolts and washer will be provided by department free of cost., erection of 145 kv equipments, 145 kv bus/line and tandom isolator, 145 kv current transformer, 145 kv post insulator, 120 kv lightening arrestor, 145 kv ct junction box, 132 kv transformer (c&r) panel, 145 kv sf-6 circuit breaker, erection of 33 kv equipments, 33 kv vacuum circuit breaker, 33 kv isolator, 33 kv current transformer, 33 kv lightening arrestor, 33 kv ct junction box, stringing of three phase jack bus 132 kv with panther conductor. the work includes cutting & bending of conductor, fixing of single/double bolted type tension fitting/suspension. hoisting of disc insulators and shifting of material from store*site to erection site and all other associated work to complete the job satisfactorily as per instruction of engineer incharge., 132 kv jack bus for transformer, 132 kv making of u jumpers, equipments interconnection jumpering with main bus bar. job includes bending of conductor in proper shape tightening with the help of clamps and all other associated work to complete the job., transformer bay for 132 & 33 kv side, laying and termination of following size control cable in trench/cable trays from different control room c&r panels to switchyard equipments (132/33 kv cb, ct their junction boxes . transformer marshalling etc) in 132/33 kv switchyard as per cable schedule including carriage of cable drum from store and all other associated work., 2cx2.5mm2, 4cx2.5mm2, 6cx2.5mm2, 10cx2.5mm2, termination of control cable ( per termination), cutting strengthening bending and laying 700 mm/500 mm below inside ground and above ground of following size m.s. flat for earthing of main and auxiliary structure and equipments including welding with main earth mat and with objects to be earthed, excavation trenches and back filling painting and all other associated work as required to complete the work satisfactorily. m.s. flat will be providing by the contractor free of cost., 75x10 mm, 50x6 mm, making delta earthing of 120 & 33 kv la by fabrication of 03 nos 3 mtr m.s. round bar ( 36/40 mm dia) electrode it piercing inside the ground and connecting all 03 nos electrodes with 36/40 mm m.s. round laying around as per drawing painting the jointing with 75x10 mm m.s. round bar laying around as per drawing. painting the joints with black japan paint of good quality after proper cleaning of joints by wire brush ms round bar will be provided by dept, free of cost., dismantling of 250k.va 33/0.4k.v station t/f work includes opening of jampers/cable connection/cutting of earthing etc., laying of 300/400mmsq. 3.5core power cable from control room t

CTN :39261023

05 Jun, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : design, support, supply, installation and commissioning, training, warranty and annual maintenance contract of medical cyclotron with turnkey (complete scope as per the attached document in specification) - [equipment -medical cyclotron system] medical cyclotron- bunker type, unshielded with 4 numbers niobium liquid target for 18f production (self shielded), 2 numbers niobium liquid target for 68ga production (unshielded or self shielded), 1 number solid target ( for production of 64cu,89zr, 68ga) (unshielded or self shielded) along with necessary operator and personnel safety interlock system, [equipment -medical cyclotron system] 18f based synthesis modulefully automated cassette-based synthesis module with suitable dual vertical hotcell or equvivalent to handle 20 ci of f18 radioactivity (each working chamber) for routine production of 18f based radiopharmaceuticals., [equipment -medical cyclotron system] synthesis research modulegeneral purpose 18f radiofluorination module with suitable dual vertical or equvivalent hot cell, [equipment -medical cyclotron system] solid target irradiation, processing and synthesis systemsolid target processing system with electroplating+recovery of enriched target+purification) automated module for synthesis of radiopharmaceuticals of zr89,64cu, with suitable hot cell (100 mm lead thickness) [separate prices to be provided for hotcell with camera and hotcell with pb glass window for the working chambers of the hotcells], [equipment -medical cyclotron system] fully automatic dispenser (18f)fully automatic dispenser for vial dispensing with suitable hot cell to handle 20 ci of f18 radioactivity, [equipment -medical cyclotron system] dispenser for solid target-based rpone dispenser for solid target-based radio-pharmaceuticals with suitable hot cell to handle minimum of 5 ci of activity., [equipment -medical cyclotron system] 68ga based synthesis module fully automated synthesis module for radio labelling of 68ga produced from cyclotron with suitable dual vertical hot cell or equvivalent [separate prices to be provided with camera and with pb glass window for the working chambers of the hotcells], [quality control system ] hplchplc with autosampler, [quality control system] gas chromatographygas chromatography with fid and autosampler, [quality control system]tlc scanner, [quality control system] ph reader, [quality control system] mca solid state based mca, [quality control system] dose calibratordose calibrator for qc, lead shielding, [quality control system] bet systemendotoxin test system for quality control, [quality control system]bod incubator, [quality control system] l-bench l-bench for target maintainance, [quality control system] l-bench (qc)l-bench for qc of pet radioharmaceutical, [quality control system]laminar flow benches, [radiation monitoring equipment] central radiation monitoring systemsystem includes software for online data acquisition and backup for six months., [radiation monitoring equipment] gamma area monitor gamma area monitor (0-100mr/h), [radiation monitoring equipment] remote probehigh range gamma monitor with remote probe, [radiation monitoring equipment] stack monitoring systemnai detector for on line stack monitoring systemlead castle for stack monitoring probeintegrated radiation monitoring computer system with complete cabling up to the top floor of building.stack monitoring channel local alarm unitssoftware system for stack monitoringmonitor channel connection kitspare parts kit for stack monitor, stacking monitor channels, area monitors, [radiation monitoring equipment]hand & foot monitor, [radiation monitoring equipment] personal pocket dosimeters (digital), [radiation monitoring equipment] portable gamma dose rateportable gamma dose rate meter + contamination probe, [radiation monitoring equipment] portable survey monitor for neutron, [radiation monitoring equipment] remote probe survey neutron monitor (high range), [radiation monitoring

CTN :40068200

28 Apr, 2025 2.95 Lacs

Bangalore - Karnataka

Tender For providing of integrated security surveillance system service - remote video monitoring; recording devices; high media quality; buyers premises; rule-based access control system (rbac); na; na; na; no

Central Government/Public Sector

CTN :40031587

26 Apr, 2025 49.91 Lacs

Umiam - Meghalaya

Tender For providing of integrated security surveillance system service - cctv system; capture devices, recording devices, archival storage; high media quality, ability to archive footage, maximum security footage; buyers premises; role-based access control system (rbac); ..

CTN :39986685

01 May, 2025 NA

Delhi - Delhi

Tender For providing of integrated security surveillance system service - outdoor perimeter security; recording devices; high media quality; buyers premises; mandatory access control system (mac); biometric; personnel and environmental safety; fully integrated pa system; n..

CTN :39993528

02 May, 2025 NA

Jodhpur - Rajasthan

Tender For custom bid for services - job work for preparation of functional filler materials, surface modification and paint formulation , custom bid for services - job work for study, design evaluation and certification requirements of special coatings to be applied on skin of airborne platform-1. preparation of microwave absorbing metal flakes powder , weighing and loading of raw metal powder in attritor mill along with steel balls and its operation , high energy milling of powder along with process control agent and regular monitoring during operation , i. , ii. , iii. , iv. , v. , weighing and packaging of powder in air tight container , vi. , vii. , un loading of powder from attritor mill on to trays and drying in room temperature , separation of powder from steel balls through sieving , regular cleaning of the machine and equipments related to above job works preparation of 5 kg of metal flakes per month , 2. surface modification of metal flakes powder , i. reaction for coating of oxide material on iron metal flakes , ii. , iii. , filtration and washing of powder , drying and packing of powder , 3. formulation of radar absorbing paint , i. , ii. , iii. , iv. , cleaning of bead mill by using solvent , modification of resin system by blending of different resins , formulation of paint by using filler material as per requirement , testing of drying time, flexibility, degree of fineness for quality check , 4. preparation of test specimen , i. cleaning of test panels (aluminium, mild steel and composites) , ii. , iii. , iv. , v. , primer application, followed by surface preparation through emery paper and solvent , application of radar absorbing paint to achieve desired thickness , prepare test panels of different sizes (100 mm x 100 mm) as per requirement application of polyurethane top coat , 5. other terms and conditions: , i. , ii. , iii. , iv. , v. , payment will be made on monthly basis after completion of job based on user job completion certificate , duration of job work: two years , the service provider should have prior experience of executing technical job work contracts in any of government department of r & d in government of india. copy of relevant supply order to be enclosed with the bid. , irrelevant supply orders pertaining to civil works, construction, security, maintenance and arboriculture will not be considered. , the contract may be extended further based on satisfactory services of service provider on same terms and conditions, if required by buyer. , this job work will be carried out at defence laboratory, jodhpur. , many shay , , scope of work , job work to study, design evaluation and certification requirements of special coatings to be applied on skin of airborne platform , (1) following scope of job work will be carried out under the supervision of rcma nashik , on monthly basis at rcma nashik. , i. , ii. , literature survey about latest and advance materials and technologies in the field of radar signature suppression of airborne targets , evolving the approach and strategies for airworthiness certification of special coating. iii. scrutiny of the airworthiness certification plan (acp), system requirements, , integration, technical specification etc. , iv. verification of the characterisation mythologies of special materials. , v. , verification and validation of process control documents and various design documents. vi. verification and validation of cfd analysis of aircraft with different flight regions. , vii. verification and validation of erosion, wear and tear analysis of coated airborne target. viii. scrutiny of documentation requirements for system level coating application and , subsequently flight evaluation. , ix. , study of rcs reduction after application of coatings by using simulation and modelling through matlab software. , (2) other terms and conditions: , i. , ii. , iii. , iv. , v. , payment will be made on monthly basis after completion of job based on user job completion certificate ,

	Apr 2025
Su	Mo	Tu	We	Th	Fr	Sa
30	31	1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30	1	2	3
4	5	6	7	8	9	10

	Mar 2025
Su	Mo	Tu	We	Th	Fr	Sa
23	24	25	26	27	28	1
2	3	4	5	6	7	8
9	10	11	12	13	14	15
16	17	18	19	20	21	22
23	24	25	26	27	28	29
30	31	1	2	3	4	5

	Apr 2025
Su	Mo	Tu	We	Th	Fr	Sa
30	31	1	2	3	4	5
6	7	8	9	10	11	12
13	14	15	16	17	18	19
20	21	22	23	24	25	26
27	28	29	30	1	2	3
4	5	6	7	8	9	10

	Mar 2025
Su	Mo	Tu	We	Th	Fr	Sa
23	24	25	26	27	28	1
2	3	4	5	6	7	8
9	10	11	12	13	14	15
16	17	18	19	20	21	22
23	24	25	26	27	28	29
30	31	1	2	3	4	5

Acve System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector