Latest adjustable wrench Tenders | Government adjustable wrench Tenders

Central Government/Public Sector

CTN :38957347

04 Feb, 2025 3.00 Lacs

Budgam - Jammu And Kashmir

Tender For supply of light weight pasting , medium weight pasting , trouser hook and eye box , open ended zipper , trouser button , coat fusing woven white colour , coat fusing woven black colour , coat fusing knit white colour , coat fusing knit black colour , shoulder pad , double side tape , cotton tape pasting , lattha pasting , hair canvas soft bukram for coat , cotton shirt fabric , concealed zip , coat fabric self , coat lining , polyester mix stripe fabric , corduroy fabric , velvet fabric , 34 size petite cups , 3ply spool , overlock cone 10000 mtr white colour , overlock cone 10000 mtr black colour , pant fabric medium weight , pant lining cotton , hand needle , embroidery multi size , snls m c needle , overlock m c needle , dye fabric , clour fixcer , fabric wax , styling tape , draping pins , t pins , thumb pins , zigzag scissors , bobin elastic , elastic , printing blocks , cord piping dore , lace fabric white , lace fabric black , trouser sante white , trouser sante black , flannel , poplin dyed fabric light yellow , poplin dyed fabric light pink , poplin dyed fabric light black , miller sheet , tweezer for overlock machine , brown pattern paper roll , professional tailor scissors , ramson penguin press , liquid grease spray , pent belt pasting roll , shirt placket pasting roll , alu bleach , teflon shoe , double needle tp x 5 , seam ripper , pencil 2b extra dark pencil with eraser , scale transparent , multicolor plastic head thumb push pin , sewing machine light , long point sharpeners , thread cutter , bound glue , single punch machine , paint brush , coat brush dust remover for clothes , 36 grid cells multipurpose clear transparent , plastic extra large storage box , plastic container multipurpose stackable , plastic extra large storage boxes , sanding paper , staedtler color pencil , drawing pencils , water color sheets a3 , watercolor sheet full size , winsor and newton watercolor artist quality tubes , oil pastel , artist quality poster color , charcoal pencils brustro , masking tape 1 inch , fine quality flate brush set , fine quality round brush set , sketch pen , alcohol markers 72 shades , cartridge sheet a3 , ivory sheet a3 , white pen , color pallate big , sketch book 200 gsm , butter paper , adjustable laptop stand , paper stand sales package , teflon sheet , teflon hammer , sumbi leather hole punch , eyelets installation , 4 lb weight pattern , head soft face rubber grip hammer , ball pein hammer , 8 sturdy steel combination plier , 6 sturdy steel combination plier , 6 inch flat file rough bastard , 32 in 1 interchangeble multipurpose mini screwdriver set , 12 piece chrome vanadium steel combination spanner set , t socket wrench , adjustable automatic cable wire stripper , plain nuts , revolving punch hand tool , teflon pressure foot , awl tool needles sewing awl hand stitcher , adjustable wrench , gas stove with 2 burners with commercial cylinder 19 kg , aluminum 40 litre patila , aluminum 50 litre patila , snap button die multiple size , skirt hem marker and chalk powder marker , tailor chalk sharpener

Central Government/Public Sector

CTN :38965094

06 Feb, 2025 1.69 Lacs

Budgam - Jammu And Kashmir

Tender For supply of tool kit set,palm sized digital multimeter,clamp meter,plastic heat gun,screw driver machine,electrical cutter,long range torch,ladder,ladder,ht gloves,6 mm drill bit,10 mm drill bit,screw driver bit,t handle socket range,allen key set,electric tape,slide wrench,spanner set,wire stripper,electric plier,screw driver set,hammer cross peen,electrical wire cutter,line tester,nose plier,hacksaw blades,1 mm wire,1.5 mm wire,6amp 3 pin top,16amp 3 pin top,fuel deilvery pump,waterproof rain coat,shock proof shoes size 9,shock proof shoes size 8,safety helmet for industrial use,industrial safety protective equipment,crimping tool,electric high pressure tank washer,adjustable wrench,ppr cutter,14 inch type pipe wrench,16 inch type pipe wrench,hammer drill machine,t handle allen key set,sledge hammer with fibreglass handle,python flat and pointed construction,t handle spanner socket wrench set,tds water meter,nose plier set,ring spanner set,level surface,professional cutter,2 in 1 long screw driver,rough file,flat file,

CTN :38956407

04 Feb, 2025 NA

Jammu - Jammu And Kashmir

Tender For supply of masala box steel , thali 5 compartments , board chopping , wall clock digital , lock , door mat , fire bucket , cap food handler , cutting plier , box gpt , ring spanner 24x27 , punches pin 2.5mm , hammer fitters 0.8 kg , screw driver 100mm , screw driver 150mm , pin cotter split steel 4 x 56 mm , spanner open jaw fixed , rubber hose , grease gun , spanner 12 x 13mm , cutting plier 200mm , adjustable wrench , axle flood lamp , torch hand

CTN :38878300

20 Jan, 2025 NA

Tirunelveli - Tamil Nadu

Tender For supply of emergency kit items as per oisd-std-117 gst@12% , emergency kit items as per oisd-std-117 gst@18% - pvc suit, non sparking tools one set consisting of: shoe handle brush -01 no-9" crate opener - 01 no-16oz claw hammer with fiberglass handle -01 no-common knife 53/4" blade: 1 no103/4" oal, -12" groove joint plier, -7" long nose pliers with cutters, -8" combination pliers, -deck scraper, -11/2" blade x 15"long, -spray booth scraper, -3" blade x 9" long, std screwdriver-5/16" tip, -6" blade, 3" phillips screwdriver, -12" tin snips, -8" adjustable wrench, -12" adjustable wrench, -14" pipe wrench (aluminium), -12" bung wrench (fits 3/4" x 2"), flame proof search light (rechargeable type suitable for explosive environment.), mega phone ex-proof (portable battery operated pa system with 1 loud speaker with a range of 1 km in still air and 500 m in noisy areas.), hand siren with stand (approx. range of 1.6 kms), fireman axe, first aid box, manual rescuciator (manually operated for artificial respirators consisting of adult size nose, mouth, face plate, air bulb with oxygen inlet connection, nonreturn, nonbreathing human valves and first aid charge packed in a plastic bag), folding stretcher (size 6 feet x 3 feet with tying belts & blanket.), mechanical tool kit, 1 set which consists of the following: screw drivers - set of 12 nos. of different size; adjustable spanner - set of 5 nos. of different size; ball pen hammer-2 nos.; multipurpose combination pliers-2 nos.; bolt cutter - 1 no, each of different sizes - 200 mm/300 mm/ 350 mm/450 mm/600 mm/700 mm/900 mm/1050 mm/1200 mm; sheet cutter - 1 no. each of different sizes - 10 mm/12mm/14 mm; double end spanner with ribs - set of 16 nos of different size; hack saw cutter-1 no.; spare hack saw blade - 10 nos., cold/low temperature hand gloves, electrical rubber hand gloves (suitable for electrical jobs upto 33000 volts), electrical tester, chemical/oil splash proof goggles (ansi/ce marked)

Central Government/Public Sector

CTN :38877626

20 Jan, 2025 NA

Koraput - Odisha

Tender For procurement for special fitting tools -- torque wrench adjustable click type, metric flex-ratchet,5-34 kg-m, 1/2 inch drive, l.c: 1 kg.m make-snap on, snap-on sioux, non-reversible pistol grip drills, 1/4" (6mm) chuck capacity 2600rpm, 0.4 hp (0.30 kw) keyed chuck make-snap on, offset wrench metric 10-11 mm,15 offset low torque slimline open-end wrench make-snap on, offset wrench metric 12-14 mm,15" offset low torque simline open-end wrench make-snap on, offset wrench metric 13-15 mm 15 offset, law torque slimline open-end wrench make-snap on, offset wrench metric 16-18 mm,15 offset, low torque slimline open-end wrench make snap on, offset wrench metric 17-19 mm, 15" offset, low torque slimline open-end wrench make-snap on, open-end wrench metric 21-24 mm make-snap on, open-end wrench metric 27-30 mm make-snap on, offset box wrench 8-10 mm, 10 deg offset, 12-point metric flank drive make-snap on, offset box wrench 10-11 mm, 10 offset, 12-point metric flank drive make-snap on, offset box wrench 12-14 mm, 10 deg offset, 12-point metric flank drive make-snap on, offset box wrench 17-19 mm, 10 deg offset, 12-point metric flank drive make-snap on, shallow socket metric 8 mm, 6- paint 3/8" drive make-snap on, shallow socket metric 10 mm, 6-point 3/8" drive make snap on, shallow socket metric 12 mm, 6- point 3/8 drive make snap on, combination wrench 10 mm, 12-paint metric flank drive, short make-snap on, combination wrench 12 mm, 12-point metric flank drive, short make-snap on, combination wrench 13 mm, 12-point metric flank drive, short make-snap on, combination wrench 14 mm, 12-point metric flank drive, short make-snap on, ratcheting box wrench 13-14 mm, 0 deg, offset, 12-point metric, latch-on make-snap on, ratcheting box wrench 15-17 mm. 0 deg, offset, 12-point metric, latch-on make-snap on, ratcheting box wrench 19-21 mm, ? deg. offset. 12-point metric. latch-on make-snap on, ratcheting box wrench 11-12 mm. 25 deg offset, 12-point metric, latch-on make-snap on, adjustable wrench 12 make-snap on, ratcheting combination wrench 9 mm, 0 deg. offset, 12-point metric flank drive make-snap on, ratcheting combination wrench 10 mm, 0 deg. offset, 12-point metric flank drive make-snap on, ratcheting combination wrench 11 mm, 0 deg. offset, 12-point metric flank drive make-snap on, wire twister/cutter, 041" cap, 8 1/2" tong. make-snap on, reversible wire twister, 041" cap. 8 3/4" long make-snap on, non-reversibile wire twister cutter 060 cap. 10 1/2" long, spring loaded.make-snap on, screwdriver (red) 035", flat tip instinct, soft grip make-snap on, screwdriver (red) 040", flat tip instinct, soft grip make-snap on, screwdriver (red) 050, flat tip instinct, soft grip make-snap on, cabinet screwdriver (red) 032 tp. flat tip, 12 3/4" long, soft grip.make-snap on, adjustable joint pier 10" make-snap on, needle nose pliers (red) make-snap on, miniature 60 bent nose plier make-snap on, lineman's pliers 9-1/4,1/2, make-snap on, 12" adjustable joint plier, straight serrated jaws make-snap on, convertible retaining ring plier 1/4"-1" intermal 1/81 make-snap on, 16 oz plastic tip hammer, make-snap on, 20-ounce ball peen hickory hammer, make-snap on, 2-1/4 round mimor with 14" shaft make-snap on, oval pocket mirror, 17 extension, make-snap on, flexible magnetic pick-up tool, 24", flexible shaft make snap on, magnetic pick up tool, lifts 2 lbs, 16 3/4 long and extends to 26 3/4", make-snap on, snap-on, 10 mm 12-point metric flank drive make- snap on, snap-on, 12 mm 12-point metric flank drive make snap on, snap-on, 10 mm 12-point metric flank drive, make- snap on, snap-on, 12 mm 12-point metric flank driveplug long combination wrench drive, make- snap on, snap-on, 10-11 mm 12-point metric flank drive, make-snap on, snap-on, 10-12 mm 12-point metric flank drive, make: snap on, 2855 d snap-on-bahco wire twisting pliers with phosphate finish 282 mm make-snap on, snap-on, flat tip 032 instinct cabinet soft make-snap on, snap-on, 8-9 mm metric open -end w

CTN :38850602

28 Jan, 2025 NA

Kangra - Himachal Pradesh

Tender For supply of tool assortments - pliers set, screwdriver all type, adjustable wrench, hammers and mallets

CTN :38801803

23 Jan, 2025 NA

Dhemaji - Assam

Tender For tender for supply of tool case for nsc section , combination spanners-size 1 obl 4 , 5 obl 16 , 3 obl 8 , 7 obl16 , 1 obl 2 , offset hexagon key wrenches , size 1.5 , 2 , 3 , 4 , 4.5 , 6 , 7 , 10mm , double open end wrenches , size 8x9 , 8x10 , 11x13 , 12x13mm. , double deep offset ring wrenches , size 5.5x7 , 6x7 , 8x9 , 10x11 , 10x12mm. , adjustable wrenches 6 inch scales , t handle wrenches 4 , 4.5 , 5.5mm , straight thin spring tweezers , bent point tweezers 120mm , extra slim spring tweezers , electricians scissors straight , front wire stripping pliers. , combination pliers bi-mater , l180mm , smooth flat long nose pliers , l140mm , half-round long nose pliers , l140mm , smooth bent needle nose pliers , l140mm , diagonal flush cutting nippers , rounded tips , l120mm , diagonal flush cutting nippers , slim tips , l120mm , flush oblique cutting nippers , mains testing screwdriver 150 250v , 6 , 5x30-screw. slotted extra short , 0x60-screwdrivers cross head ph , 1x80-screwdrivers cross head ph , 2x100-screwdrivers cross head ph , 1x30-screwdrivers cross head ph , 2x30-screwdrivers cross head ph , 2 , 5x60-screwdriv. headless slotted , 3x75-screwdrivers headless slotted , 4x100-screwdrivers headless slotted , 5x125-screwdrivers headless slotted , 6 , 5x150-screwdriv. headless slotted , 200-engineers hammers wooden shaft , 150-flexible graduated rules , engineers scriber , measuring tapes 10mt , telescopic joint inspection mirror , needle files , spring puller , bristle brush , pen oiler , bm-utility knife 6 spare blades , bm-foldaway knife , self-locking round end knurled , gas soldering iron with 7 accessories

Central Government / Public Sector

CTN :38824286

27 Jan, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of spares, fitment and repair of hydraulic equipment crab nut torque wrench avanti -5 sl no. t r-1513-485, as per annexure attached. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :38744932

18 Jan, 2025 NA

Raigad - Maharashtra

Tender For supply of ag-83225-83768 - lapping glass, good quality, toughened, thickness:s or 6mmdia:1", surf flatness/smooth surface should be placedwithin +/- 0.001mm., lapping glass, good quality, toughened, thicknes:5 or 6mmdia:2", surf flatness placed within +/-0.001??., lapping glass, good quality, toughened thicknes: 5 or 6mm, dia:3", surf flatness/smooth surface should be placedwith in +/- 0.001mm., lapping glass, good quality, toughened, thickness:s or 6mmdia:4", surf flatness/smooth surface should be placedwithin 0.001??., lapping glass, good, quality, toghened, thickness:5 or 6mm, dia:5",surf flatness/smooth surface should be placedwithin +/- 0.001??., lapping glass, good quality, toughened, thickness:5 or 6mmdia:6", surf flatness/smooth surface should be placedwithin 0.001mm., lapping glass, good quality, toughened, thickness:5 or 6mmdia:1.1/2" face flatness/smooth surface should be placed within +/- 0.001mm., lapping glass, good quality, toughned, thickness:5 or 6mmdia:2.1/2", rface flatness/ smooth surface should be placed within +/- 0.001mm., lapping glass with hole of size 4mm at center good quality toughened t hickness 5mm 1 diameter surface flatness, smooth surface should within +/-0.0001mm., lapping glass with hole of 12 mm at the center. good quality toughened thickness 6mm, 3" diameter surface, wrench pipe 8 inch length x 27 mm.capacity, stillson pattern made of fo rged carbon steel., wrench pipe 300 x 44 mm.capacity is4003-1978, stillson pattern, made of forged carbon steel., adjustable wrench, size: 6" length,, jam capacity: 3/4",, satin finish with etched scale on jan, conforms to bs 6333 & iso 6787, make: sam or equivalent., adjustable slide wrench 10 inch, long.drop forged crome vanadium steeli s-6149.1971., c-clamp, maximum opening of 25 mm, material:ss 304., c-clamp 305 maximum opening 100 mm throat distance., apex make mechanic bench vice, jaws, width:200 mm, jaws openiing:235 ??, jaws depth:110 mm., apex make mechanic bench vice, jaw width:125mm, jaws opening:170mm, jaws depth:85mm., engraving machine for writing names & nos.on machine parts., soldering wire [lead] composition sn 40 pb in a wire form of 14 swg rolled on bobbin 12 mm dia] 60, soldron make 230v ac 50 h2 25w, soldering iron with x 3 core cable and 3 pin 5 amp plug., gasket cutting machine (manual) along with following standard, accessories:, 1. caliberated bars (scale) to cut circular gaskets from 2 inches (50.8, mm) id to 42 inches od (1068.8 mm), 2. hss cutter blade three no., 3. turn table (for large diameter circular gasket) one no., 4. cutter removal and cutter alignment keys one no. each, 5. stainless steel bolts and nuts for mounting machine on work table two nos., 6. drill 10.0 mm (center hole drilling prior to mounting) one no., 7. laminated flange dimensions and drilling table to b.s. din and ansi standards three nos., flatness/smooth surface shoul e within +/- 0.0001mm., lapping glass wth hole at center size 12mm good quality toughened thickness 6mm; 4" diameter, surface flatness, smooth surface, should witin +/-0.0001 mm, lapping glass with hole center size 12 mm, good qualitytoughned thickn ess 6mm diameter 5" surfaceflatness smooth surface should be within 0.001 mm., lapping glass with hole of size 12mm at center. good quality toughned/ thickness 6mm 6" diameter with surface flatness smooth surface shou be wthin +/-0.001mm (w/s)-, lapping glass with hole of size 6mm at the center goodquality toughene d: thickness smm,2" diameter, surface flatness smooth, surface sh d be within +/-0.0001mm., lapping glass 8" dia, with hole of size 12mm at centre, good quality, toughened, thickness: 5 or 6mm, surface flatness/smooth surface should be within +/- 0.001mm, lapping glass 8" dia, good quality, toughened, thickness: 5 or 6mm, surface flatness/smooth surface should be within +/- 0.001mm, scissor st handle industrial for cutting fabric felt nylon and lead 10 inch., flexible pvc tube, od: 6 mm, id: 3 mm, in roll of 30 meters, colour:

Adjustable Wrench Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector