Latest adjuster Tenders | Government adjuster Tenders

Central Government/Public Sector

CTN :39417478

27 Feb, 2025 NA

Ahmedabad - Gujarat

Tender For supply of set of safety bracket for slack adjuster bottom, as per rdso drawing no. sk.dl-4200, (i) ref no. 44/1 - safety bracket - 04 numbers lh and 04 numbers rh with ref no. 44/2 -safety bracket bar- 04 numbers lh and 04 numbers rh. (material - steel to is-2062 gr. c), (ii) bolt hex head m10 x 50 long, m aterial - steel to is- 1363. ( qty- 32 numbers), (iii) spring washer b10, material - steel to is- 3063 ( qty- 48 numbers), (iv) slotted nut hex m10, material - ste el to is-2232. ( qty- 48 numbers),(v) split cotter pin 2.5 mm dia x 32 mm long, material - steel to is-( qty- 48 numbers). in one set [ warranty period: 30 m onths after the date of delivery ]

Central Government/Public Sector

CTN :39418587

21 Mar, 2025 NA

Dahod - Gujarat

Tender For supply of barrel spring for slack adjuster type irsa 600 to rdso drg. no. wd-82064-s-04-rc, alt- 6, item-4 and other technical requirements conforming to rdso specification no. 07-abr-1992 with a mend 5of sept. 2016. [ warranty period: 36 months after the date of delivery ]

CTN :39388117

25 Feb, 2025 NA

Jhabua - Madhya Pradesh

Tender For supply of 400kv cb spares for sf6 breaker overhauling work - o - ring p-18 for 400 kv sf6 cb, o ring p-7 , for 400 kv sf6 cb, control valve seat, 3 bond compound, air reservoir o ring, al. pipe o ring iap 100, circlips,split pins,dowelpins, darina grease, anabond 680/silastic1080, drain valve ,930052003/sp, check valve (nrv) ,930052004/sp, safety valve ,930052005/sp, resistor 3.3 k ohm ,940232102/sp, trip latch spring ,930171003/sp, antipumping spring, holding latch with roller & bearing, bearing for barpin where holding latch, bearing for holding latch barpin,latched, front & rear door gaskets, operation counter ,930232008/sp, cap seal valve with o-ring,sf6,cgl, shockprof ruber,hardwar 1pol cb400kv sf6, chemistic for single pole cb 400kv sf6, bronze washer for single pol cb400kv sf6, filter pad,louvers 400kv sf6 cb sfm-40a, blind cap,gas stop valv 1pol cb400kv sf6, gas pressure gauge, 930237099/sp, air pressure gauge,930237029/sp, air pressure switch with adopter, space heater, l/r switch 7 pole, tnc switch, window glass with gasket & cord, aux. switch shaft with lever, tripping coil,220vdc,80ohm,400kv,sf6 cb, closing coil,220vdc,126ohm,400kv,sf6 cb, aux. cont. cad32md,3no+2nc/220vdc 4no, aux. cont. cad32md,type-3no+2nc/220vdc, pwr cont,lc1d09,3p,25a,460v,schneider, overload relay (4-6) amp, mcb 63a ,4p,c-curve, mcb,2p,40amp,230vac, v-belt/(a63),thik,1600x13x8mm,neoprene, tuneup kit,compressor,mn:234,ir, o ring iap40, for 400 kv sf6 cb, o ring iap 90 for 400 kv sf6 cb, shock absorber oil for 400kv sf6 cb, emery pad ,for 400 kv sf6 cb, o ring p-260 ,for 400 kv sf6 cb, o ring p-170 ,for 400 kv sf6 cb, o ring p-40 for 400 kv sf6 cb, etna seal set for 400 kv sf6 cb, absorbent for 400 kv sf6 cb, micro carbon grease (1 pkt = 50 grms), jointal - z for 400 kv sf6 cb, pole moving arc contact & guide,400kv cb, pole stationary arc contact,400kv cb, pole nozzle ,400kv cb, pole mechanism of hardware set,400kv cb, sf6 gas cylinder 50 kg ,400kv cb breaker, control valve assembly,400kv cb, shock absorber assembly,400kv cb, antipumping dc,contact relay,vajs13,220v, pole descripancy relay,220vdc,make:erl, auxiliary switch assembly (std),400kv cb, gas feed valve,400kv cb, gas density switch q6,400kv cb, piston ring,400kv cb, close coil assembly,400kv cb, trip coil assembly,400kv cb, mechanism of hardware set,400kv cb

State Government

CTN :39373998

07 Mar, 2025 33.63 Lacs

Sangrur - Punjab

Tender For various works in sub tehsil longowal - patwari cabins:-scraping cement outer plaster, scraping cement inner plaster, cement rendering on plaster 1mm thick, 12.5 mm thick cement plaster 1:4, 20mm thick cement paster 1:4, first class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level., 115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1:4 cement mortar in superstructure, 12.5 mm thick cement plaster 1:5, 20mm thick cement paster 1:5, preparation of plastered or concrete surface or painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish, applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface, distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade, finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sq, providing and laying vitrified floor tiles in different sizes in light colour shades made using full body technology (thickness to be specified by the manufacturer) with water absorption s less than 0.08% and conforming to is : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) size 600x600 mm, providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. the tiles should have humidity resistance (rh) of 99%, light reflection > 85%, thermal conductivity k = 0.052 - 0.057 w/m k, fire performance as per (bs 476 pt - 6 &7)in true horizontal level suspended on interlocking t-grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized@120 gsm) comprising of main t runners of 15x32 mm of length 3000 mm, cross t of size 15x32mm of length 1200 mm and secondary intermediate cross t of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter m-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and l-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main t . the system should rest on periphery walls /partitions with the help of gi perimeter wall angle of size24x24x3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall s.s. screws. the exposed bottom portion of all t-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. the work shall be carried out as per specifications, drawings and as per directions of theengineer-in-charge.with 16 mm thick beveled tegular mineral fibre false ceiling tile (nrc 0.55 to 0.6)size 595x595 mm, earth work in excavation in foundations trenches etc. in all kinds of soil where pick-jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres., cement concrete 1:8:16 with stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type, first class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth, base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mix

Central Government/Public Sector

CTN :39418102

17 Mar, 2025 NA

Bikaner - Rajasthan

Tender For supply of traction sleeve with guide pin (for slack adjuster type irsa-600) to drg. no. wd - 82064 - s - 03 rc alt. 7, item no. 3 & 1, rdso spec. no. 07-abr-92, amndt no. 5. [ warranty period: 36 months after the date of delivery ]

Central Government/Public Sector

CTN :39405077

05 Mar, 2025 NA

Chennai - Tamil Nadu

Tender For supply of brake cylinder with inbuilt slack adjuster with hand brake cable for bmbs wagon with h and brake cable to rdso drg. no. wd-08093-s/2 item-3, alt. 3. ref. drg. no. wd-08095-s-01, alt. nil and confirming to kbi part no.1.4.2034 or similar and to rdso spec. no. wd-23-bmbs-2008 rev.1. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39417617

13 Mar, 2025 NA

Chennai - Tamil Nadu

Tender For supply of barrel spring for slack adjuster type irsa 600 to rdso drg.no. wd-82064-s-04-rc, alt- 6, item-4 to rdso spec.no.07-abr-1992 amend. no.5 of sep-2016. [ warranty period: 36 months aft er the date of delivery ]

Central Government/Public Sector

CTN :39417563

25 Mar, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of slack adjuster assembly upper [1 ]

Central Government/Public Sector

CTN :39417964

27 Feb, 2025 NA

Jhansi - Uttar Pradesh

Tender For supply of "brake slack adjuster to drg. no. 411-74102, alt-nil." [ warranty period: 30 mo nths after the date of delivery ]

CTN :39417489

13 Mar, 2025 NA

Asansol - West Bengal

Tender For supply of clip retainer for slack adjuster as per emd part no. 8401928 dlw part no. 17452405 & dlw drg. no. 8401928 alt. e or latest. [ warranty period: 30 months after the date of delivery ]

Adjuster Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors