Latest adjusting ring Tenders | Government adjusting ring Tenders

Central Government / Public Sector

CTN :41514916

15 Sep, 2025 NA

Hyderabad-T - Telangana

Tender For corrigendum : supply of spare kit for zs coupling of 400a, 3 ph, 750v as per rcf specification no: edts105, rev.e with amndt. 1,2 & 3. the list of the items are as follows: (a) contact pin assembly for phases, neutral & earth with springs (b) connector female assembly phases, neutral & earth with springs (c) ratchet arrangement for coupling socket assembly, (d) insulating base with fixing screw kit for coupling socket, (e) insulating base with fixing screw kit for jumper plug assembly, (f) hinged cover assembly for blind socket, (g) ratchet arrangement for blind socket assembly (h) pma protective sleeve for cables, (i) conduit sealing ring & all types gaskets, (j) coupling socket housing assembly, (k) lever tie bow rh & lh, (l) connecting link lever arm, (m) rivet pin link long.

Central Government/Public Sector

CTN :41651115

20 Sep, 2025 NA

Multi City - Multi State

Tender For providing of custom bid for services - application of surface protective hard coating on stay vanes, stay ring and spiral casing surface for two units at uri-ii power station

CTN :39809867

02 Sep, 2025 NA

Hyderabad-T - Telangana

Tender For bid to ras corrigendum : supply of teflon tape,battery cell,magnifying glass,tissue paper,silicon grease,cotton cloth,cutting wheel,grinding wheel,emery paper,acid and alkali resistant rubberized protective apron,borosilicate glass beaker 100 ml,borosilicate glass beaker 250 ml,borosilicate glass beaker 500 ml,borosolicate glass beaker 1000 ml,ceramic bowl,rectangle grinding stone,round grinding stone,led torch light,ring spanner set,flat spanner set,magnetic spirit level,digital multimeter,safety goggles,ss nut and bolt with washers, m8 , 10 nos in one packet,ss nut and bolt with washers, m10, 10 nos in one packet,nitrile gloves,leaf feeler guage

Central Government/Public Sector

CTN :41130353

02 Sep, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For bid to ras supply of investment casting for valves division bhel tiruchirappalli - 921558920000-adjusting ring-cf8m-9456 , 920510200000-blank nozzle head -casting-a297 gr hh , 920176760000-guid stl6-7501 , 921550050000- guide stl-6-7520 , 920176040000-hand wheel bush- 4076 , 920090460000-hand wheel-32510 or wcb-5904 , 920090380000-hand wheel-32510 or wcb-5907 , 920404820000-lance diffuser , 921558980000-low adjring-cf8m-7003 , 920176740000-p.seat bsng-stl6- 7506 , 920176910000-pipe ell-cf8-7501 , 920510180000- rod d50x200-a297 gr hh , 921512140000-stellite rod dia 20 -180mm , 920339950000-stem collar casting- a743-ca6nm , 920338840000-tee handle-3255 , 921558910000-up adj ring-cf8m-7003 , 920342580000- wedge-a351 cf8m-5936 , 920342180000-wedge- stellite6-5294

Central Government/Public Sector

CTN :41477152

04 Sep, 2025 1.07 Crore

Tiruvallur - Tamil Nadu

Tender For corrigendum : tender for supply of dry ash conveying maintenance spares d d - rsv-200nb bushing assy.with housing , 3inch complete assy. , 3inch spacer , 3inch valve seat , 3inch valve disc , 3inch adapter , 3inch packing gland follower , 3inch side port adaptor , 3inch top port adopter , 3inch bottom adaptor , 3inch protective sleeve / shaft sleeve , 300x150mm pipe plug , 300x150mm air intake check valve , 300x150mm gland packing housing , 300x150mm slide gate , 300x150mm valve seat , 300x150mm valve outlet , 300x150mm gland packing follower , 300x150mm matl.handling v/v comp.asy(lh) , 300x150mm matl.handling v/v comp.asy(rh) , 300x150mm spring for air inlet check v/v , 300x150mm disc for air inlet check v/v , driven sprocket , 450mm , driving sprocket , 450mm , bearing assembly , 450mm , air lock vessel 2.5ksc aeration unit , 12inch- 45 deg elbow , rsv-200nb clevis , rsv-200nb gate , rsv-200nb gate arm , rsv-200nb spring adj. screw , rsv-200nb oring ring , rsv-200nb valve seat , rsv-200nb gate bushing

State Government

CTN :40874685

09 Sep, 2025 4.15 Lacs

Multi City - Telangana

Tender For corrigendum : supply of spares for centrifuge of central lube oil system and main turbine lube oil system of ktpp, stage-ii (1x600 mw) unit - gasket,part no.518488-01,f/centrifuge mab206, , o-ring size:288x6.5,part no.11905,f/centrifuge mab206, "flexible coupling,part no.538574-80,f/centrifuge mab206", oil seal,part no.223521-14,f/centrifuge mab206, seal ring,part no.223521-12,f/centrifuge mab206, seal ring,part no.519550-01,f/centrifuge mab206, o-ring size:38x6,part no.64706,f/centrifuge mab206, seal ring,part no.223521-15 ,f/centrifuge mab206, spring washer,part no.62094,f/centrifuge mab206, screw,part no.2211722-24 ,f/centrifuge mab206, wear gasket,part no.535743-04,f/centrifuge mab206, gasket,part no.518470-02 ,f/centrifuge mab206, key,part no.541405-01,f/centrifuge mab206, bushing,part no.518431 02,f/centrifuge mab206, round nut,part no.67477,f/centrifuge mab206, hinged bolt,part no.225415 41,f/centrifuge mab206, cylindrical pin with hole,part no.72680,f/centrifuge mab206, slotted pin,part no.72474,f/centrifuge mab206, cap nut,part no.536704 02,f/centrifuge mab206, "height adjusting ring,part no.519607 01,, f/centrifuge mab206", , cap nut,part no.221854 03,f/centrifuge mab206, screw,part no.72933,f/centrifuge mab206, washer,part no.20758,f/centrifuge mab206, washer,part no.223146 02,f/centrifuge mab206, "screw,old part no.2211721- 07,new part no.2211722-24,f/centrifuge mab206", , cap,part no.71123,f/centrifuge mab206, , cap,part no.71124,f/centrifuge mab206, , cap,part no.71125,f/centrifuge mab206, , cap,part no.71126,f/centrifuge mab206, , spacing ring,part no.518483 01,f/centrifuge mab206, brake shoe,part no.518476 81,f/centrifuge mab206, , slotted pin,part no.68794,f/centrifuge mab206, , grooved pin,part no.222116 06,f/centrifuge mab206, , cap nut,part no.518415 01,f/centrifuge mab206, , lock washer,part no.38159,f/centrifuge mab206, "handle,old part no.518341 02,new part no.7440262-02,f/centrifuge mab206", flow indicator,part no.526542 80,f/centrifuge mab206, bowl disc ø 0,5 mm (reference 3),part no.518416 85,f/centrifuge mab206, tubular spring pin, part no.222119 30, f/centrifuge mab206, , o-ring, part no.223406 30, f/centrifuge mab206, ,

corporations/Associations/Others

CTN :41595267

10 Sep, 2025 2.10 Lacs

Haveri - Karnataka

Tender For dma/hvr/2025-26/water supply materials annual maitainance/ts - electrofusion reducer 90 by 75 mm, pvcbend140mm dia, pvcbend75mm dia, pvcelbows180mm dia, pvcelbows160mm dia, pvcelbows140mm dia, pvcelbows110mm dia, pvcelbows90mm dia, pvcelbows75mm dia, pvcelbows63mm dia, providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile iron di conforming ti is1865 with the latest amendments and of grade ggg 40or50, provision for corresponding dia ms flanges should be made in the estimate.etc. comple for sluice valve of pn 10and 200mm, providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile iron di conforming ti is-1865 with the latest amendments sr rates of valves and provision for corresponding dia ms flanges should be made in the estimate. etc. completfor sluice valve of pn10.0 and 150mm , providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile iron di conforming ti is-1865 with the latest amendments and of grade ggg 40 50, shaft of stainless steel, wedge fully rubber lined with edpm seals of nbr and the valves should be vacum tight and 100complete specification as per item no2.23.2, providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile irondi conforming ti is 1865 with the latest amendments and of grade ggg 40or50, complete specification as per item no 2.23.1, supply, installing,testing and commissioning common control panel consisting of the following incoming no set of phase indicating lamps with sfu of suitable rating no, analog ammeter, no analog voltmeter 1ni with phase selector switch, complete specification as per item no 13.24.1, supply, installing,testing and commissioning common control panel consisting of the following incoming set of phase indicating lamps with sfu of suitable rating , analog ammeter, analog voltmeter 1ni with phase selector switch, complete specification as per item no 13.23, supply of isi mark 175mm nominal bore,plain and steel casing pipe grade of steel fe 410 of wall thickness conforming to is 4270 2001 and latest ammendments, complete specification as per item no 12.32, pvccouplers 200mm dia, pvccouplers 140mm dia, pvccouplers 110mm dia, pvccouplers 75mm dia, pvccouplers 63mm dia, handglovess, pvcreducer 110 mm dia, pvcreducer 90 mm dia, pvcreducer 75 mm dia, pvcreducer 63 mm dia, pvcreducer 50 mm dia, pvcservice saddles 90 mm dia, pvcservice saddles 75 mm dia, pvcservice saddles 63 mm dia, pvcbend 160 mm dia , pvcbend 110 mm dia , pvcbend 90 mm dia , pvcbend 50 mm dia , pvctee 160 mm dia , pvctee 110 mm dia, pvctee 90 mm dia, pvctee 75 mm dia, pvctee 63 mm dia, pvctee 50 mm dia, pvctee 40 mm dia, pvctee 25 mm dia, pvcelbows 200 mm dia, pvcelbows 50 mm dia, pvcelbows 40 mm dia, pvcelbows 32 mm dia, pvcelbows 25 mm dia, pvc flebyible hose pipe 1inch, upvc column pipe 1inch, hdpe pipe grade pe100-pn 10, 63mm , medium duty gi pipe of 25mm dia , medium duty gi pipe of 20mm dia , opvc reducer 200x160 , opvc reducer 160x110 , opvc reducer 110x90 , opvc sliding coupler 200mm pn16 , opvc sliding coupler 160mm pn16 , opvc sliding coupler 110mm pn16 , pvc pipes of 6 kg/cm2 for 90mm(1.313) , opvc sliding coupler 60mm pn16, supply and delivery at site 50mm(2inch) dia heavy duty unplasticized pvc column pipes with heavy duty collars,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proof epdm ring with isi mark with its latest amendments, supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (c class) as per is 1239 (part-i) 1990 with latest amendments with isi mark (one end fitted with heavy duty collar and other end fitted with protective cover)50 mm , supply and laying of lg ut cable having aluminium conductor pvc insulated, sheathed, galvanized steel wire / steel tap armored cable with pvc over sheathing., pvc pipes of 6 kg

Central Government And Public Sector

CTN :41330093

02 Sep, 2025 36.25 Lacs

Chamba - Himachal Pradesh

Tender For corrigendum : tender for supply of procurement of spares of ksb make raw and potable cooling water pumps : : - pump shaft rdlv200-340/400 part no. 1211 for raw water pump , double-entry-imp rdl200-340b , part no 1234 , casing wear ring rdl200-340b , part no 1502 , impeller wear ring 503 for raw water pump 40hp , model-rdlv-200-340b , shaft protective sleeve for raw water pump , 40 hp , rdlv 200-340 b , part no.4001-201-006 , shaft protecting sleeve 70x200 part no. 1524 for raw water pump , bearing bush k70 , 2x120 part no. 1545 for raw water pump , parallel key a10x6x30 part no. 1940.1 for raw water pump , parallel key a16x10x140 part no. 1940.2 for raw water pump , parallel key a14x9x90 part no. 1940.3 for raw water pump , shaft protecting sleeve 60x190 part no. 1524 for clean water pump , bearing bush for 40 hp clean water pump , model no.rdlv 150-340a , parallel key a8x5x25 part no. 1940.1 for clean water pump , parallel key a14x9x110 part no. 1940.2 for clean water pump , parallel key a10x8x80 part no. 1940.3 for clean water pump

CTN :41587046

16 Sep, 2025 NA

Jabalpur - Madhya Pradesh

Tender For supply of lv7 10103069 sealing ring n9 9003 122 , p1 155sw w p1 10403316 o ring n9 8 18 3x2 4 , p1 155sw w p1 10312331 protective plug n15 37 39 , p1 155sw w p1 6242119 protective plug n15 39 m14x1 5 , p1 155sw w p1 1147160 hose connection hydr elinst cradle , p1 155sw w p1 31014550 funnel u 23 21 3 , p1 155sw w p1 10403526 o ring n9 8 124 3x5 7 hydraulic tank , p1 155sw w p1 10403539 o ring n9 8 189 3x5 7 , p1 155sw w p1 10100262 cast fettle brush u 23 6 6 , p1 155sw w p1 10303758 screw driver n13 32 611 , p1 155sw w p1 10303767 screw driver n13 32 615 , p1 155sw w p1 10301060 protective plug n15 31 a14 , p1 155sw w p1 10301064 protective plug n15 31 a 26 , p1 155sw w p1 1135749 manometer , p1 155sw r z6 5340 159774 strap line supporting x12 513 763 , p1 155sw r z6 5340 159786 strap line supporting x12 502 45 , p1 155sw r z6 5340 160869 strap line spx12 502 42std parts , p1 155sw l x5 6360524 h4 lampelect comp , p1 155sw w p1 10342772 strap x12 514 772standard parts , p1 155sw w p1 10335543 strap x12 502 43 , p1 155sw w p1 10323980 protective plug n15 37 62 , p1 155sw w p1 10313487 screw driver u10 102 long no 1 , p1 155sw w p1 10304900 protective plug n15 37 15 , p1 155sw w p1 10313454 bottle brush u 23 102 15 , p1 155sw w p1 10403402 o ring n9 8 17 2x3 , p1 155sw w p1 6337004 guide , p1 155sw w p1 10403203 o ring n9 8 5 1x1 6 , p1 155sw w p1 10403205 o ring n9 8 7 1x1 6 , p1 155sw w p1 6345071 list strip , p1 155sw w p1 10342771 strap line spx12 514 771 , p1 155sw w p1 6295073 air filter breather with valve , p1 155sw w p1 10403414 o ring n9 8 44 2x3 ) /bid number : gem/2025/b/6613918 * /dated: 26-08-2025 & & / bid document 1 / 24

CTN :41566916

04 Sep, 2025 NA

Delhi - Delhi

Tender For tender for supply of gloves protective large , handles files 140mm , chest tool kit medium wooden 950 x 35 , handles files no 1 , bags tool carpenter , brushes writing medium , handel shovel hand wooden , bucket canvas mk 6 without lid for , handels pick digging head 685mm , handels axes pick head straight 915mm , handle powrah wooden , tasla basket for earth , wrushes retouching sable no 0 , screw drivers new perfect 150mm , spanner o.j.d.e. b.s.&w spear head norm , hammer engineers ball pein 800 g , spanners ring bihexagon double ended cra , phawrah complete , stool camp mark-1 , boots short knee roubber size 8 , whistle ball , scale math no 1 , scale plotting no 1 c off set , compass proportional 150mm , levels mk 4 , tape measuring steel 30 metrs , drafting instrument set , set square 250mm 60 degrees , t-square 7-00mm , grephnel hand actuting trip wire mk-1 , hdpe hand bag khaki , drawing board d2 700mm x 500mm (nsn nomen) , sand bags unproofed , hammer ball light , drill electric portable light duty 06 mm

Adjusting Ring Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

corporations/Associations/Others

Central Government And Public Sector