Latest adjusting washer Tenders | Government adjusting washer Tenders

Central Government/Public Sector

CTN :43197073

22 Dec, 2025 NA

Katni - Madhya Pradesh

Tender For supply of pin cotter dia 6.3x90 for bogie mounted brake system and washer to drg. no.wd-08093-s-02,alt.-03, item-18.

Central Government/Public Sector

CTN :43144749

22 Dec, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of insulation washer, drawing number am54074, revision 15, item no. 08, material specn. aa22216 , insulation washer, drawing number am54074, revision 15, item no. 11, material specn. aa22216 , insulation shims, drawing number 44025146001, revision 03, item no. 01, material specn. aa22415

Central Government/Public Sector

CTN :43017961

19 Dec, 2025 NA

Varanasi - Uttar Pradesh

Tender For corrigendum : tender for supply of turbine fasteners and small machined components : : - sealing ring (hw-117.43) -- fully m/cd item as per drg. 41122302007 rev.00 with matl. hw10683 rev.03 , screw soc head cone point pm10x45 (hw-123.108) -- fully m/cd item as per std. st01019 rev.03 (size no. 108) with matl. hw10683 rev.03 , cap nut (hw-374.47) -- fully m/cd item as per drg. 3-11322-56017 rev.00 with matl. hw10683 rev.03 , hexagon nut (hw-374.49) -- fully m/cd item as per drg. 41120256034 rev.00 with matl. hw10683 rev.03 , screw hex pm6x16 (hw-123.084) -- fully m/cd item as per std. st01019 (size no. 084) with matl. hw10683 rev.03 , fitting piece l 55 (hw-399.117) -as per drg. no. 41010258022 v-04 and matl. hw10683 , nut collared hex (hw-399.128) -as per drg. no. 41172356082 and matl. hw10673 , bush (hw-399.79) -as per drg. no. 31120230016 and matl. hw10683 , bush (hw-399.80) -as per drg. no. 31120230017 and matl. hw10683 , cover (hw-399.113) -as per drg. no. 41120230018 and matl. hw10683 , bush (hw-399.81) -as per drg. no. 31120230021 and matl. hw10683 , nut (hw-399.126) -as per drg. no. 31120230026 and matl. hw10683 , washer (hw-399.242) -as per drg. no. 41120230027 and matl. hw10683 , hexagon head screw (hw-374.42) -as per drg. no. 41120256041 and matl. hw10673 , nut (hw-399.127) -as per drg. no. 31122330018 and matl. hw10683 , washer (hw-399.243) -as per drg. no. 41132256022 and matl. hw10683 , hexagon head screw (hw-391.73) -as per drg. no. 41122356023 and matl. hw10673 , hexagon nut (hw-399.120) -as per drg. no. 41120256039 and matl. hw10683 , seal ring (hw-397.28) -as per drg. no. 41122330009 and matl. hw10683 , bush (hw-399.84) -as per drg. no. 31122330012 and matl. hw10683 , cover (hw-399.109) -as per drg. no. 31122330014 and matl. hw10683 , bush (hw-397.29) -as per drg. no. 41122330015 and matl. hw10683 , bush (hw-399.90) -as per drg. no. 31132056007 and matl. hw10683 , cover (hw-399.114) -as per drg. no. 41132056013 and matl. hw10683 , nut (hw-374.29) -as per drg. no. 31122356018 and matl. hw10683 , hexagon nut m16 (hw-374.48) -as per drg. no. 41132256009 and matl. hw10683 , nut (hw-391.75) -as per drg. no. 31132256021 and matl. hw10683 , seal ring (hw-399.144) -as per drg. no. 31132256026 and matl. hw10683 , bush (hw-399.96) -as per drg. no. 31132256013 and matl. hw10683 , cover (hw-399.111) -as per drg. no. 31132256015 and matl. hw10683 , parallel pin (hw-388.58) -as per drg. no. 41132256034 and matl. hw10683 , bush (hw-399.88) -as per drg. no. 31123956016 and matl. hw10683 , cover (hw-399.110) -as per drg. no. 31123956018 and matl. hw10683 , fitting piece (hw-399.116) -as per drg. no. 41074733018 and matl. hw10683

Central Government/Public Sector

CTN :43143764

29 Dec, 2025 NA

Bhusawal - Maharashtra

Tender For supply of set of mica washer 02mm thick. one set c [set of mica washer 02mm thick. one set consist of (1) mica washer, od-50mm. id 22mm, qty- 80 nos. and (2) mica washer od-50mm. id-14mm, qty-30 nos. as per is: 2464. one set consist of 02 item 110 nos. and each set to be packed separately in protective cardboard box.]

Central Government/Public Sector

CTN :43088176

29 Dec, 2025 NA

Vijayawada - Andhra Pradesh

Tender For corrigendum : supply of spring washer b10. drg: lihw09 item no 21. coating to mdts-057

Corporations And Associations And Others

CTN :42423568

22 Dec, 2025 9.00 Crore

Panchkula - Haryana

Tender For corrigendum : tender for the supply, installation and commissioning of elisa reader with elisa washer on 2 years rate contract as mentioned against item in schedule of requirement.

State Government

CTN :43061677

17 Dec, 2025 NA

Delhi - Delhi

Tender For corrigendum : strengthening of (e/m) equipments of various tube wells installed at babu park kotla area under kasturba nagar constituency ac-42 . - s/o double flanged g.i pipe of 50 mm dia. medium class each of 3 mtrs long duly threaded on both ends welded and fitted with g.i flange on both ends having the slot for sub cable.make: - tata/jindal, supply of out door type 7.5 to 10hp hut type electrical feeder pillar/metal board of welded construction of size 1370mm x 760mm x 460mmfabricated with 16 swg m.s. sheet with horizontal and vertical intermediate chamber of suitable size onsuitable size insulating board to make the panel robust, having double door with 14 swg s.s hinges along with double locking arrangement with arrangement for mounting of switch gear and electrical energy meter i/c powder coating, vermin proof having following items.1. mccb 63 amp, 4 pole-1 no2. rccb/elcb 63 amp, 4 pole with earth fault indicator and positive contact indication protecting a circuit automatically 1no3. fully automatic star delta starter of 10hp, 3phase oil immersed type 1no4. digital ampere meter 96mmx96mm square shape of 0-30 amp range 1no5. digital voltmeter of 96mm x 96 mm square shape of 0-500 volt range with selector switch 1no6. led indicating lamps with fitting (a set of 3 lamps) 1set7. shunt capacitor of 5 kvar with three phase isolator 1no8. motor protection assembly having earth leakage protection, phase sequence corrector, single phasing protection, over load protection, high voltage-low voltage protection. 1no9. programmable time switch (i.e. ryb phase & facility to change over from automatic to manual & vice versa) up to 10 h.p.1no10. complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc.as required. the panel board shall be mounted on the base frame of 600mm height made of 50x50x6mm angle iron frame.make:-all the insert used in panel must be of djb approved makes and should be isi marked where make of that equipment is not approved.djb item code 10.2.1, supply of pvc insulated pvc sheathed copper conductor flat cable size 3 core x 4sq mm,1100 volts, confirming to is 694(each roll 100mtr long) make: finolex / havells./kei/any djb approved make., s/o nut bolts,washer dia 1 long full threaded, s/o rubber packing 50 mm dia. flange., lowering and lifting of sub/sets from bore by taking out double flanged gi pipes, submersible p/set, cable, cutting of rusted nuts and bolts etc and replacement of damaged d/f gi pipes, cable, defective pump set etc as per site requirement and lowering of sub p/set, sub cable, gi pipe etc as required, jointing of cable from sub p/set along with holding of cable with pipes and jointing of d/f pipes etc with nuts bolts and rubber packing etc. the job includes hiring of all t&p, tripod stand, chain pulley block and other material handling equipments, safety gadgets ad required and consumable material (rubber packing and nuts bolts) will be arranged by the firm as per site requirement. the other material required during execution will be provided by department.

Central Government/Public Sector

CTN :43152361

17 Dec, 2025 NA

Yamunanagar - Haryana

Tender For supply of interlock washer suitable for m16 bolt (make/type - disc lock / nord lock /dur lock / gallock) for lhb coaches. drawing :- item no. 19 along with note 1 of rcf drg. no. 1268732 alt. (07r4) or item no. 25 along with note 3 of equivalent icf drg. no. 45501001_alt h or item no. 19 along with note 1 of rcf drg. no. lg01103 alt. c specification no. :- icf/md/spec.331 rev.01 [warranty period: 30 months after the date of delivery ]

State Government

CTN :43117057

17 Dec, 2025 NA

Delhi - Delhi

Tender For strengthening of e/m equipment of various tube wells installed at sarai kale khan area under jangpura constituency ac-41. - supply of double flange gi column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with gi flange on both ends and welded support l-type ms bracket in both flange with slot of submersible cable.make: tata/ jindal. , supply of out door type 7.5 to 10hp hut type electrical feeder pillar/metal board of weldedconstruction of size 1370mm x 760mm x 460mmfabricated with 16 swg m.s. sheet with horizontal and vertical intermediate chamber of suitable size onsuitable size insulating board to make the panel robust, having double door with 14 swg s.s hinges along with double locking arrangement with arrangement for mounting of switch gear and electrical energy meter i/c powder coating, vermin proof having following items.1. mccb 63 amp, 4 pole-1 no2. rccb/elcb 63 amp, 4 pole with earth fault indicator and positive contact indication protecting a circuit automatically 1no3. fully automatic star delta starter of 10hp, 3phase oil immersed type 1no4. digital ampere meter 96mmx96mm square shape of 0-30 amp range 1no5. digital voltmeter of 96mm x 96 mm square shape of 0-500 volt range with selector switch 1no6. led indicating lamps with fitting (a set of 3 lamps) 1set7. shunt capacitor of 5 kvar with three phase isolator 1no8. motor protection assembly having earth leakage protection, phase sequence corrector, single phasing protection, over load protection, high voltage-low voltage protection. 1no9. programmable time switch (i.e. ryb phase & facility to change over from automatic to manual & vice versa) up to 10 h.p.1no10. complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc.as required. the panel board shall be mounted on the base frame of 600mm height made of 50x50x6mm angle iron frame.make:-all the insert used in panel must be of djb approved makes and should be isi marked where make of that equipment is not approved.djb item code 10.2.1, supply of pvc insulated pvc sheathed copper conductor flat cable size 3 core x 4sq mm,1100 volts, confirming to is 694(each roll 100mtr long). make: granlay / havells./gloster/any djb approved make., supply of nut bolts, washer 1/2 dia 1 long full threaded., supply of rubber packing 50 mm dia. flange., lowering & lifting of sub/sets from bore by taking out double flanged gl pipes, submersible p/set, cable, cutting of rusted nuts and bolts etc and replacement of damaged d/f gi pipes, cable, defective pump set etc as per site requirement and lowering of sub p/set, sub cable, gl pipe etc as required, jointing of cable from sub p/set along with holding of cable with pipes and jointing of d/f pipes etc with nuts bolts and rubber packing etc. the job includes hiring of all t&p, tripod stand, chain pulley block and other material handling equipments, safety gadgets ad required and consumable material will be arranged by the firm as per site requirement. the other material required during execution will be provided by department. djb sor(e&m)-2022 item code 27.1.2

Central Government/Public Sector

CTN :43138103

31 Dec, 2025 NA

Mumbai - Maharashtra

Tender For supply of 1) hex head screw m16 x 60 (property class 10.9 to is-1367 : part 3 : 2017). material and specification as per is-1364 : part 2 : 2023 as per drg. no cg-14053, alt-2, item no. 06. make/brand : tvs or dfl or unbrako or tuff only. qty. per set - 01 no 2) spring washer b16. material and specification as per is-3063 : 1994 (reaffirmed year : 2021 ) as per drg. no cg14053, alt-2, item no 08. qty. per set - 01 no.

Adjusting Washer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors