Latest advertisement board Tenders | Government advertisement board Tenders

CTN :38965289

06 Feb, 2025 NA

Mumbai - Maharashtra

Tender For providing, assembling, transporting & placing / fixing in position cabin table consist of main table of size2400x900x750 mm with eru side unitsize : 1200l x 400d x 750ht and mobile pedestal. size : 400l x450w x 650ht . table top work surface & side panel- made of 25mm thick bwp grade plywoodconforming is code 710 with 0.5mm natural veneer lamination on top face & balancing veneermatching polish . modesty panel & understurture panel- made of 18mm thick bwp grade plywoodconforming is code 710with 0.5mm with natural veneer lamination on face & balancing matching polish.all table top edges with matching veneer polish . integrated pedestal- bwp grade plywood conformingis code 710 with 0.5mm natural veneer lamination . pedstal construction is box-box-file type whichuses powder coated 400 mm long metal panel drawer slides. drawer slide shall have extension of 325mm. drawers have a soft closing & anti slam mechanism. handles are provided for ease of opening.pedestal is provided with lock for security complete as per manufacturers specification and direction ofengineer - in- charge.veneer finish back unit shall be in commercial plywood bwp grade conformingis code 710 with 0.5mm natural veneer lamination. back unit shall have 25mm top with openableshutter of 12mm with handle & lock provision. dimension (w)2400mm x (d)400mm x (h)1040mm. allcomplete as per direction of engineer in charge..

State Government

CTN :38747621

22 Jan, 2025 1.68 Lacs

Idukki - Kerala

Tender For corrigendum : general-encroachment eviction,removal of advertisement boards,flex boards,temporary sheds etc under roads section no.1,painavu idukki-2023-24-general civil work

CTN :38863758

29 Jan, 2025 NA

Meerut - Uttar Pradesh

Tender For provision of 04 x fd ops room- work for 01 x fd ops room. the work consists of manufacture and supply of prefabricated mob ops room (veh mounted) of size 5.4.m x 4.80 m upto height of 2.44m and the shelter will consist of the fwg :- 2. 3. (a) the shelter would be of size 18 ft x 8 ft x 8 ft mounted on als extendable & extractable to provide hall of size 16 ft x 18 ft x 8 ft covered on three side with on end open (ref drawing no. 6) 4. 5. (b) the shelter should be mounted on flat bed als of size 16 ft x 8 ft (c) the shelter should be prefabricated and should have foldable wings for roof, floor and walls to provide a hall of size 5.4m x 4.80m x 2.44m i.e (18 ft x 16 ft x 8 ft) when all wings panel completely opened and on side of the same not enclosed. (d) opening and closing of wings should be operated through winches system manually. the base panel wings should be supported by adjustable manual jack system. (e) mechanism of opening or closing of wings will be based on operation of winches supported with manual jack system, to be functioned as under:- (i) opening the wings. the operator turns the winches handle, engaging the system to lift the top & bottom wings smoothly which are connected by steel wire rope. as the wing panels lifts, the adjustable manual jack at the base panel, are extended to provide additional support ensuring stability of the telescope structure. (ii) closing the wings. the operator when turns the winches handle in the opposite direction lowers the wing panels to closed position (see drg no 6). the adjustable manual jack can be gradually retracted to lower the base panel, ensuring controlled and smooth movement. (iii) the jack to be welded/bolted with base plate of size 300mm x 300mm x 10mm thick steel plate and the height of jack should be max of 6 openable. (iv) advantages: - (a) manual control - the winches system allow for precise manual control over the shutter movement. (ab) mechanical advantage - gears reduce the effort needed to lift or lower the wings. (ac) stable support - manual jacks provide strong and stable support for the base panel, ensuring safe and efficient operation. this mechanism of manual jack and winches system to ensure efficient, controlled, and fail safe operation of the wings. (f) tech staff of contractor to be present during assembling of shelter till its final taking over on charge by the insp team. (g) assembling and mounting of shelter on flat bed als to be provided by contractor as a onetime measure/initial demonstration till its final taking over on charge by the insp team. design criteria. (a) seismic co-efficient as per seismic zone iii. (b) wind load - equivalent to wind speed of 55 mtrs/sec as per is-875-2015 (reaff 2020). (c) roof slope -1:1.2. (d) external temperature (-) 10 0c to + 500c. (e) water absorption/penetration since, the shelter is removable and joints are not of permanent nature, flexibility in adoption of mechanism for sealing the joinery through appropriate means like silicon gel etc has been kept reserved for a later stage for optimum outcome during execution. however, the fwg mechanism would be adopted for sealing the joints. (i) rubber or silicon gaskets - rubber or silicon gaskets to be applied around the edges of the shelter panels and doors. it will be compressed to form a watertight and airtight seal when the shelter is assembled. (f) termite proofing all components of woods & puf to be treated for termite proofing. (g) ease of construction shelter should be modular in design. (h) design load as per is-875-2015 (reaff 2020)

corporations/Associations/Others

CTN :38756004

24 Jan, 2025 5.00 Lacs

Virudhunagar - Tamil Nadu

Tender For supply and delivery of safty arrangements for north east mansoon in virudhunagar municipality - supply and delivery of suction pipe including cost of all charges etc.,complete, supply and delivery of suction foot valve including cost of all charges etc.,complete, supply and delivery of nylon rope including cost of all charges etc.,complete, supply and delivery of torch light including cost of all charges etc.,complete, supply and delivery of power saw including cost of all charges etc.,complete, supply and delivery of crow bar including cost of all charges etc.,complete, supply and delivery of spader including cost of all charges etc.,complete, supply and delivery of iron tasla including cost of all charges etc.,complete, hsn:84137010 model no: eterna 1800bw kirloskar make 1.8kw/2.5hp 1 ph 230v waste disposer pump , size :65mm, removal of centrifugal pumpset/ jet pumps/ submersible pumpsets and its accessories from borewell/ open well for attending repairs 50% of the rates mentioned under item 17 (a), (b) and (c) may be allowed for the respective horse power twad sor 22-23 pg.no:308, supply and delivery of submersible centrifugal sewage non-clog pumps, vertical spindle type pump , wear resistance with submersible motor for the various duty conditions. pump shall be capable of handling min 100 mm solid size with sewage specific gravity of up to 1.05. pump shall be of robust construction, liquid passages shall be finished smooth and designed as to allow free passage to solids. pump impeller should be of non-clog semi open type , single vane /multi vane preferably contra bloc or vortex impeller design. double mechanical seal with silicon carbide faces should beprovided to protect the motor from ingress of sewage along the shaft. the critical speed of the rotor shall be at least 30% above the operating speed. pumps should have double bearings between the pump & motor. the bearings life shall be minimum 100,000 hrs of operation with greased for life. pump should be provided with automatic coupling device including pedestal, duck foot bend, stainless steel guide pipe or related accessories of suitable size to facilitate lifting and lowering into guide rails for easy maintenance. pump shall be provided with a stainless steel lifting chain conforming to bs 970 gr 304. pump speed shall be of 9600 rpm for high duty pumps and 960/1450 rpm for low duty pumpsets. casing and impeller should be of ci gr. fg 260 :is210 more preferably with hardened impeller.shaft shouldbe of stainless steel aisi 410. all the fasteners and bolts shall be of aisi 410.the submersible motor shall be operated with 3ph, 415 v(+or 10%), 50hz(+or-5 %) dry induction type. motor shall be capable of giving rated output without reduction in the expected life span when operated continuously. the rotating assembly shall be dynamically balancedas per standards. the starting current of the motor shall not exceed 200% of rated full load current for star / delta or ats starting under any circumstances .the motor shall be suitable for full voltage star delta / ats starting. the locked rotor current of the motor shall not exceed 600% of full load current unless otherwise specified. motor shall bedesigned to withstand 120% of rated speed for two minutes without any mechanical damage, in either direction ofrotation. the motor vibration shall be within the limit specified in applicable standards . motor should be of ie2,explosion proof compatible for vfd operation together with star-delta /ats starter, protection against increase instator winding temperature (15 deg celsius), bearing temperature, leakage in the stator housing and terminal box shallbe provided and to be suitably interlocked with the control panel for tripping the pump in case of increase intemperature beyond set limit.insulation class shall be of class h and degree of protection shall be of ip 68 as per is 4691. motor shall be suitablefor continuous operation in fully submerged or partially submerged condition.t

Central Government / Public Sector

CTN :38872392

28 Jan, 2025 NA

Secunderabad - Telangana

Tender For supply and fixing of boards set consisting of two items (1) direction boards with radium stick er on acp (aluminum composite panel) sheet to is 17682:2021 with iron frame (m.s) size 3/4-inch square pi pe. sizes are as per the requirement of the consignee (3 feet x 4 feet size) qty-1 no (2) fixing rod (m.s) for direction boards size: l-type, width: 2-inch, thickness-05 mm, height: 10 feet-qty-2 nos [ warranty perio d: 30 months after the date of delivery ]

CTN :38783037

22 Jan, 2025 NA

North 24 Paragana - West Bengal

Tender For tender for supply of nut lock(ispl plate-3.01) , washer (plate-3.01 oblique 14) , hose assy(ispl plate-4.01) , hose case drain , break valve(ispl plate-4.04) , tee (price list page 3 oblique 40) , gaitor(ispl plate-5.04) , adopter(ms sl no-76) , rubber beading (ispl plate-6.01) , wiper motor with blades(pr sl-171) , adapter , control lever assy , direction indicator light(ispl plate-9.01) , light , head light (ispl plate-9.01) , horn(ispl plate-9.02) , hour meter(ispl plate-9.03) , dummy switch , front wiper switch , dual indictr hyd clog (fuel fltr) , hydraulic oil temp sensor(pr sl-292) , water temp gauge(ispl plate-9.03) , dual indicator bty , heater glow , dual indicator water temp , oii pressure , fuel gauge (ispl plate-9.04) , 4 way ignition key switch(plate-9.04) , left right indicator switch(plate no-9.04 , sl no-9 , relay (price list sl-276) , flasher unit(ppl sl-280) , element filter(ispl plate10.2) , hose assy , adapter(ispl plate-10.4) , adaptor (ispl plate-10.4) , hose assembly , connector(ispl plate-12.1) , hose assy , hose , suction hose of hydraulic pump(plate-10.5) , hose , hose(ispl plate-10.5) , top tank cap (ispl plate-2.01) , raditor mounting pad top(pr sl-309) , radiator drain hose(plate-2.02 oblique 10) , rad mounting rubber pad(pr sl-319) , intake line hose assy , return line hose , bend hose , rubber hose(plate-2.04) , air cleaner hose , pump coupling (size 10 inch for sae4) (ms sl no -5) , mounting bracket , air cleaner clamp(ispl plate-2.04 , seal kit(plate-10.11) , adapter(ispl plate-10.12) , hose , hose assembly , suction hose charge clamp (ispl hyd circuit) , bifurcation pipe(sr no-482) , feed pipe , hose assy , hose assy , o ring , bracket assy , pipe assy(plate-11.3 oblique 03) , pipe assy(p-141) , pipe assy(p-141) , pipe assy , pipe assy , union with o ring , pipe assy , pipe assy , o ring , clevis(ispl plate-12.1) , pull cable loader arm (ppl sl-601) , sp bearing , bushes cabin lift cyl , bush(ispl plate-14.2) , arm cylinder seal kit , bush , radiator assy (price list sl-320) , rubber mat , battery cable +ve(plate-9.10) , battery cable -ve , earth wire (ssl os ser no 216) , heating relay(plate-9.14) , main shaft(plate-3.01) , cover plate(ispl plate-3.01) , sleeve(ispl plate-3.01) , hex nut locking(ctlg plate-3.01) , sleeve (ispl plate-3.01) , lock washer(ispl plate-3.01) , hex head screw m8x20 (ppl sl-13) , bearing (ispl plate-3.01) , taper bearing small(ispl plate-3.01) , spacer(ispl plate-3.01) , ball bearing (62102ks) , circlip , o ring , circlip(pr sl-29) , oil seal (ssl os sl no 60 & pl sl no 30) , screw allenscrew allen , banjo assembly , pipe assy , hose assy , hose assy , hose assembly(ispl plate-4.02) , tee adaptor(sr no-59) , hose assy , solenoid brake valve , clamp(sr no-66) , screw hex(sr no-66) , tee-union , hex screw , washer plain , hex nut m10(sr no-84) , nut hex m8(ispl plate-5.04) , dowel special pin(ispl plate-5.04) , ball joint (os sl no-90) , auxillary cable(ispl plate-5.04) , rubber bush(pr sl-115) , adaptor(sr no-116) , rubber pad(plate-6.01) , front glass(plate-6.01) , rubber bush (front cab)(pr sl-127) , cab mtg bracket , circlip external , screw hex m8 , washer plain m8 , panel board lh (ispl car & rops) , panel board rh(ispl plate-6.03) , console lh , plate insert lh , plate insert rh , rear side panel lh( ispl cab trim) , rear side panel rh (ispl cab trim) , fan (ispl- cab trim) , front door glass (os sl no-133) , cab lift pump(plate-4.05) , hose assy , connector(plate-2.03 oblique 3)hose clip , jubilee clip , adapter-cablift pump (ispl& price list) , dowty seal(pr sl-186) , dowty seal(pr sl-187) , seat assy(ispl plate-6.04) , handle holder lh , plug , sight glass , dowty seal(pr sl-229) , rubber cap(ispl plate-8.03) , special bolt door (ispl plate-8.02) , m8 big washer , internal light with bulb (cabin light) , fan swtch , work light switch , cabin harness for skid steer(plate-9.05) , chassis harness for skid steer loader , dash board harness lh , dash

CTN :38792385

27 Jan, 2025 NA

Jamalpur - Bihar

Tender For supply, fixing, testing and commissioning of 100 kvar apfc panel, with crca sheet of thickn ess 2.00 mm with 7 tank process powder coated, ip-54 consisting of the followings:- (1) main mccb 250 a mp 3 pole 35/36ka - 01 no., (2) main copper bus bar tpn 400a capacity -01 set, (3) apfc relay 8 stage - 0 1 no. (4) led indicator r/y/b -03 nos, (5) mccb 100 a 3-pole 10 ka -02 nos. (6) mcb 40 a 3-pole 10 ka -02 nos.(7) mcb 32 a 3 pole 10 ka-01 no. , (8) mcb 20 a 3-pole 10 ka - 01 no., (9) mcb 10 a 3 pole 10 ka - 01 no. (10) mcb 6 a 3-pole 10 ka - 01 no. (11) contactor capacity duty type:- moc 25 for 25 kvar - 02 no. (1 2) moc 15 for 15 kvar- 02 no(13) moc 10 for 10 kvar -01 no. (14) moc 05 for 05 kvar -01 no.(15) moc 03 for 03 kvar -01 no.(16) moc 02 for 02 kvar- 01 no .(17) heavy duty capacitor :- 25 kvar - 02 no, 15 k var- 02 no., 10kvar-01 no. 05 kvar - 01 no., 3kvar- 01 no., 2kvar - 01 no. (18) auto manual selector s witch -08 nos. (19) led indicator on off- 16 nos. (20) control and power cable frls copper , ( 21) ct-as p er requirement, including all accessories for commissioning complete in all respect as per direction of engin eer in-charge.. transportation of complete set from electrical store to installation site and dismantling and new arrangement as per site requirement is under the scope of firm. nabl/govt. lab test report along with 3rd party inspection report to be submitted at the time of supply of material at consignee end. as per iec 6 1921/ is 8623/ is 16636/ iec 61439. make abb/ havells/ l&t/ siemens or similar . [ warranty period: 30 months after the date of delivery ]

Advertisement Board Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government / Public Sector