Latest aerial bunched cable Tenders | Government aerial bunched cable Tenders

Central Government/Public Sector

CTN :41223286

18 Aug, 2025 NA

Chittaranjan - West Bengal

Tender For supply of aerial bunched cables as per is 14255 (q3)

State Government

CTN :41265412

09 Aug, 2025 NA

Kargil - Jammu And Kashmir

Tender For supply of aerial bunched cables as per is 14255

CTN :41228018

04 Aug, 2025 11.68 Lacs

Chandigarh - Chandigarh

Tender For providing electrical supply to newly installed acs in various class of govt. model senior secondary school, school-16-d,chandigarh. - dsr item no. 2.10 supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, "c" curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required., single pole, triple pole, dsr item no.2.5 supplying and fixing of following ways surface/ recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcbs (but without mcbs and incomer) as required (note: vertical type mcb tpdb is normally used where 3 phase outlets are required)., 4 way (4 + 12) double door, dsr item no.14.16 supplying and laying of following size dwc hdpe pipe isi marked along with all accessories like socket, bend, couplers etc. conforming to is 14930, part ii complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required., 160 mm dia (od-160 mm & id-135 mm nominal), providing and fixing following rating mccb 4 pole 415 volt (thermal magnetic / microprocessor release) without ms enclosure for over load and short circuit protection, 36-55 ka breaking capacity (ics=100% icu) with positive isolation. (as per complete item no. 4 of the dnit)., 100 amp 4 pole 36 ka mccb (thermal magnetic release)., 250 amp 4 pole 36 ka mccb (thermal magnetic release)., 400 amp 4 pole 50/ 55 ka mccb (microprocessor release) with lsig protection., supply and laying of xlpe insulated pvc sheathed aluminium conductor cable of 1.1 kv grade as per is 7098 (part-i) 1988 (amended up to date) of the following sizes to be laid direct on surface with the help of m.s. clamp of suitable thickness. (as per complete item no. 5 of the dnit)., size 35 sq.mm 3.5 core xlpe al. arm. cond. cable, size 25 sq.mm 3.5 core xlpe al. arm. cond. cable, supply and laying of xlpe insulated pvc sheathed aluminum conductor cable of 1.1 kv grade as per is 7098 (part-i) 1988 (amended up to date) of the following sizes to be laid in existing rcc/hume/dwc/ metal pipe. (as per complete item no. 6 of the dnit)., size 300 sq.mm 3.5 core xlpe al. arm. cond. cable, supply, erection testing and commissioning of l.t. cubical panel indoor type with degree of protection ip 54 fabricated from 14 gms (2mm) thick crca sheet and ms flat, (as per complete item no. 7 of the dnit)., 01 no. lt panel approx. size 1150 mm x 2400 mm

corporations/Associations/Others

CTN :41208690

07 Aug, 2025 NA

Surat - Gujarat

Tender For item rate tender for repairing and renovation of carpentary works in sub zone-1 of south west (athwa) zone. - providing & fixing powder coated aluminium partly glazed and partly panelled partition using medium duty sections of hindalco, zindal, narmada, banco or equivalent approved make having section 63.50 mm x 38.10mm ( frame-.758 kg/rmt & middle section- 0.819 kg./rmt), galzing clip with 5 mm thick clear float glass of approved make including all other necessary fittings and fixtures. entire work will have to be made water proof using necessary rubber sectioned wherever required. gaps all round the frame to be filled with approved water proof sealent. bottom portion of doors both side to be covered with 12mm thick prelaminated particle board of approved make and quality and as per design., providing & fixing partly panel & partly glass powder coated aluminium doors with aluminium section of hindalco, jindal , narmada,banco or equivalent approved make having poder coated outer frame leg partition section of 63.50 mm x 38.10 mm having weight 1.158 kg. / r.m. shutter section having size 83.5 mm x 44.45mm ( top & bottom: 1.384 kg./rmt. and middle 1.139 kg./rmt.) door vertical 47.62mm x 44.45 mm ( vertical:0.881 kg./rmt. & top hing side:0.974 kg./mt.), glazing clip (jindal section no. 19370 wt. 0.109 kg./ mt.) with 5mm thick sheet glass in acid frogting and 12 mm thick prelaminated sheet of greenlam, panama or archid make as approved by engineer-incharge including fixing brass pivot, handle, lock etc. complete., providing & fixing window having extruded aluminium colour powder coated / colour anodize section frame main outer size 63.50 x 38.10 x 1.95 mm ( of jindal section no.: 4605,@ wt. 1.094kg/mt.) horizontal two track member size 61.85 mm x 31.75 mm x 1.20 mm (of jindal section no : 8687, @ wt. 0.695 kg/mt.) vertical member of size 61.85 mm x 31.75mm x 130mm ( of jindal section no : 8758 @ wt. of 0.659 kg/mt.) with sliding shutters of horizontal member size 40 mm x 18 mm x 1.29 mm ( of jindal section no.:8947, @ wt. of 0.456 kg/mt/section 8948, @ wt. of 0.457 kg/mt) with 5 mm thick transparent silicon sealant glass fixing to frame as per details etc., providing & fixing window having extruded aluminium colour anodize section frame main outer size 95 mm x 24 mm x 1.17 mm ( of jindal section no.: 2459,@ wt. of 0.738 kg/mt.) horizontal three track member size 92 mm x 31.75 mm x 1.30 mm (of jindal section no : 8688, @ wt. 1.07 kg/mt.), vertical member of size 92 mm x 31.75mm x 1.50mm ( of jindal section no : 8933 @ wt. 1.06 kg/mt.) with sliding shutters of horizontal member size 40 mm x 18 mm x 1.29 mm ( of jindal section no.:8949, @ wt. of 0.456 kg/mt/) with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminium fittings & fixtures and transparent silicon sealant glass fixing to frame as per details etc., providing and fixing standared extruded of aluminium section of size 61 x 37.0 x0.90 mm (of jindal section no.14080, @ wt. 0.471 kg per mt) with colour powder coated alluminium frame for lovered glass ventilation with 4 mm thick figured glass as details etc. complete for ventilation., providing & fixing panels -12mm thick indian gypsum panels of saint gobin brand, screwed to g.i. gram at 200mm c/c, frame g.i. frame fabrication with 60 x 26 x 0.5mm perimeter channels as required, 155 x 5 x..55mm intermediate channel at 1220mm c/c, 25 x 10 x 0.55mm ceiling angle at 1220 mm c/c, securely fixed soflit hangers at 1220mm c/c, false ceiling angle shall not at more than 610 mm from adjan wall connecting clips, etc, as required complete as per manufacture specifactions, joints all joints of panels field and finished with indian gypsum, jointing compound, joining tapes, etc. complete including scaffolding as required complete in all respects by engineer in charge., supply & fixing of 16mm.th.armstrong classic lite square edge mineral fiber celling with 24mm grid(l

Co-operative

CTN :41239305

11 Aug, 2025 NA

Farrukhabad - Uttar Pradesh

Tender For annual maintenance contract of cctv and hardware networking - item, amc of 80 column dot matrix printer, amc of optical fiber network which included switch and other equipment with jointing and splicing, amc of 500 lpm line printer, amc of 1600 v a ups, amc of cctv camera, connecting cable, connector , data switch, monitor installed at control room, adaptor for camera, amc of window server along with support of window server, amc of client computer along with support of window, amc of 64 port nvr with hard disk, amc of rf device for point to point connectivity along with poe device, amc of 5 kva on line ups, anpr camera, anpr camera navr

State Government

CTN :41241193

04 Aug, 2025 NA

Thiruvananthapuram - Kerala

Tender For supply of aerial bunched cable lt 1x25 + 1x25 (insulated messenger) for the pps work of pangode grama panchayath in palode electrical section & in order to clear the safety issues under electrical division nedumangad

State Government

CTN :41249490

12 Aug, 2025 88.2 Thousand

Multi City - Telangana

Tender For providing 50 sqmm aerial bunched cable for main power supply in place of old damaged and including repairs and replacement to electrical installation to the reservior pump room on the o.u. campus. (2nd call)

CTN :41213286

14 Aug, 2025 43.99 Lacs

Bacheli - Chhattisgarh

Tender For providing of raw water supplies item, filter water supplies item-1) providing and laying including testing ductile iron mechanical joint collar with follower glands conforming to is: 9523/2000 having dimension as per table 24 of is: 9523/2000 in the following nominal diameter/sizes with external bitumen and internal cement mortar lining. 2) providing and laying including testing ductile iron double socket 90 bends conforming to is: 9523/2000 having dimension as per table 15 of is: 9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. 3) providing and laying including testing ductile iron double socket 45 bends conforming to is: 9523/2000 having dimension as per table 16 of is: 9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. 4) providing and laying including testing ductile iron double socket 22.5 bends conforming to is: 9523/2000 having dimension as per table 17 of is: 9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. 5) providing laying and jointing of following galvanized iron (ms) pipes with specials (such as bends, elbows, tees etc) class light, medium & heavy including testing ofjoints, cost of pipes, specials and jointing materials all complete. pipes and sockets conforming to 1s:1239/2011 part 6) providing and fixing g. i. union in g.i. pipe line i/c cutting threading testing etc. complete (new work) confirming to is 1879. 7) providing and fixing g. 1. socket in g.i. pipe line i/c cutting threading testing etc. complete (old work) confirming to is 1879 .8) providing and fixing g. 1. bend 90 degree in g.i. pipe line ife cutting threading testing etc. complete (old work) confirming to is 1879 .9)_ supplying & installation star of energy efficient tive bee rating isi marked required capacity of three phase. 50 hz. 415v. deep well submersible pump steel body, suitable for 6"tube well with control panel starter suitable for submersible pump with dry run protection, single phase preventer, connections, including clamps, bore cap etc, as required as per specifications but excluding pipe and connection cable. .10) .

corporations/Associations/Others

CTN :40999210

11 Aug, 2025 28.30 Crore

Ajmer - Rajasthan

Tender For corrigendum : lt xlpe insulated aerial bunched cables with bare messenger wire for lt over head lines suitable for working voltage upto and including 1100v conforming to is 14255/1995 amended upto date of the size 3cx25 plus 25 sq. mm. and 3cx50plus35 sq. mm

Central Government/Public Sector

CTN :41237340

11 Aug, 2025 NA

Vadodara - Gujarat

Tender For supply of manhole jointing for dome arrgt. of btpn wagon to rdso drg.no.wd-86081- s-61,alt.13, item no.4. material to is;2712-1998, (reaffirmed-1999)gr,o/2. specn: ind/86061/s/61 [ warranty period: 30 months after the date of delivery ]

Aerial Bunched Cable Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors