Latest aerial maintenance platform Tenders | Government aerial maintenance platform Tenders

State Government

CTN :41283092

19 Aug, 2025 38.88 Lacs

Ukai - Gujarat

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - wt 4980 g works for removal and application of insulation and ms cover plate gi sheet al sheet or corrugated sheet at various elevation and location of boiler unit nos..

State Government

CTN :41189579

12 Aug, 2025 8.09 Lacs

West Tripura - Tripura

Tender For maintenance of mi scheme under belbari rd block during the year 2025-26/sh_ - repair _ maintenance of pump-motor, suction-delivery _ electrical accessories etc. (job no. tr/34/minor works/wrd-i/2025-26) - dismentling of pump for over hauling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs. in two spell complete as per direction of the engineer-in-charge.i) for li, supply & fitting fixing ball bearing of approved quality for pump required during overhauling.i) 6306 ball bearing (tata /skf), providing & fitting fixing shaft sleeve bush of approved quality.i) for li (cast iron), providing & fitting fixing shaft sleeve nut of approved quality.i) cast iron (ci), providing & fitting fixing c.i. gland of approved quality.i) for li, providing & fitting fixing c.i coupling complete with nuts & bolts of approved quality.i) 150 mm dia, providing & fitting fixing coupling nuts & bolts (all size)of approved quality.i) for li, providing & fitting fixing coupling rubber bush (all size)of approved quality. i) for li, providing & fitting fixing coupling star bush (all size) of approved quality.i) 150 mm dia, providing & fitting fixing pump shaft of approved quality., supplying and fitting fixing of asbestos rope of best quality as per direciton of engineer-in-charge. i) 6mm to 8mm thick, ii) 10 to 12 mm thick, providing & fitting fixing casing ring of approved quality.i) 150 mm dia (10 mm thick), supplying and fitting fixing of pump cooling pipe of best quality as per direciton of engineer-in-charge., providing & fitting fixing lantern ring for pump of approved quality., supplying and greasing/applying of grease of approved quality as per direction of engineer-in-charge., providing and fixing g.i. bend /elbow in the pipe line including testing of joints complete as per cpwd specification and direction of the engineer - in - charge. a) 150 mm dia, providing & fitting fixing shaft sleeve nut of approved quality. (cast iron), providing & fitting fixing of g.i. flange ( 10 mm wall thickness ) by welding with g.i. / ms pipe and placing position as per specification and the direction of the engineer-in- charge.i) 150 mm dia, providing & fitting fixing gland nut / stag nut 100 mm long for gland of approved quality.i) for li, providing and fitting fixing m.s. clamp for hose pipes with nuts & bolts complete as per relevant is specification anddirection of engineer-in-charge.i) 150mm dia, providing & fitting fixing rubber flange washer 6 mm thick at site of work of approved quality.i)150 mm dia, providing and fitting fixing ms foot valve as per relevant is specification and the direction of the engineer-in-charge.. i) 150 mm dia, providing & fitting fixing c.i tail piece of approved quality at site of work.i) 150 mm dia, providing & fitting fixing foot valve leather washer (6 mm thick) of heavy duty at site of work of approved quality.i) 150 mm dia, providing & fitting fixing c.i foot valve spare parts of 125/150 mm dia at site of work of approved quality.a) c.i foot valve weight, b) c.i foot valve ring, c) c.i foot valve net, dismantling of motor fpr vernishing heating etc cpmplete in/c reinstalltion and trail run for two spell complete as per direction of the engineer-in charge., supplying & fitting fixing of spare parts for 20/25 hp horizontal motor.a) motor fan, b) terminal plate, providing and fitting fixing of fully automatic star delta type motor starter ( 3 ph. 50 hz, 415v, 25hp /18.50 kw relay range within 17-25 ) in steel sheet enclosures with contractors and timer etc. complete suitable for motor pump havells/l & t/bch make direction of the engineer-in-charge.i) 25hp/18.5kw relay range within 13-21 +10%, providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for din fuses). triple pole with neutral link ( tpn ) , 415/500 volt complete as per direction of the engi

CTN :41221730

09 Aug, 2025 NA

Batote - Jammu And Kashmir

Tender For rate contract for fixing of rates for supply of materials for repair of distribution transformers at divisional store of electric division jpdcl batote for the financial year 2025-26 or till next year tender is finalized - super enameled aluminium wire swg-21 (isi mark) in exchange of scrap, super enameled aluminium wire swg-18 (isi mark) in exchange of scrap, super enameled aluminium wire swg-16 (isi mark) in exchange of scrap, super enameled aluminium wire swg-13 (isi mark) in exchange of scrap, super enameled copper wire swg-13 (isi mark) in exchange of scrap, super enameled copper wire swg-12 (isi mark) in exchange of scrap, super enameled copper wire swg-11 (isi mark) in exchange of scrap, aluminium strip for lt winding of sizes, copper strip for lt winding for 400 kva/630kva transformers 8/4 - 10/4.5, lt bush rod brass-complete 12 mm, lt bush rod brass-complete 20 mm, lt bush rod brass-complete 25 mm, lt bush rod brass-complete 30 mm, ht bush rod 12 mm brass for 11/0.440 kv transformer (complete), l.t bush for 11/0.440 kv transformer, 12 mm, l.t bush for 11/0.440 kv transformer, 20 mm, l.t bush for 11/0.440 kv transformer, 25 mm, l.t bush for 11/0.440 kv transformer, 30 mm, ht bush 12 mm for 11/0.440 kv transformer, butter paper, cotton tape 1 roll, rubberized cork sheet 4 mm thick 3x3, rubberized cork sheet 5 mm thick 3x3, cork strip 4mm, lethoride sheet, packing sheet 1mm & 1 mm, glass empire/glass sleeves 0-4mm, glass empire/glass sleeves 8-10mm, bakelite tubes of sizes (as per sample), packing gutties 1 ,1 , nuts and bolts for transformer of sizes, insulating varnish dr. beck, old cotton sarees/ waste, wooden wedges size, ht washers, lt washers m-20, lt washers m-25, lt washers m-12, ht bush clamps ( bimetallic, heavy duty), fevicol, transformer oil, three phase, 2 hp motor, filter paper pack 36 inch/3 feet, 2 kw heater 2.5 feet long, stainless steel type(u shape) tubular finned oven heating element, thermostat rotational type, contactor ml-2, 3-phase motor 1.5 hp, filter packs 2 feet micro, thermostat 0-110, indicator (ryb) big, sproket set 92x25x25, sproket 25, single teeth, chain 10 feet (big), 1/2, chain 10 feet (big), 3/4, chain small 10 feet, 1/2, chain small 10 feet, 3/4, hose pipe, 1 inch, electronic weighing machine (capacity 10kg), electronic weighing machine (capacity 200kg), electric chain pulley 3 ton, electric chain pulley 5 ton with remote, contactor ml-4, steel washer for transformer-as per sample, ms clamping ring-as per sample, m-seal

Central Government/Public Sector

CTN :41069412

04 Aug, 2025 45.00 Lacs

Delhi - Delhi

Tender For ca no. ge/h/ t-25/ 2025-26 repair to rcc fascia chajja ms wk roof sheet and water proofing sunken and other allied b/r works at building no. p-100 and p-125 of ahrr under ge e/m rr hosp. delhi cantt-10

Central Government/Public Sector

CTN :40971427

29 Jul, 2025 40.00 Lacs

Visakhapatnam - Andhra Pradesh

Tender For repair to roof sheet rolling shutter valley gutter n ms door at nad v under age br ii of ge nd visakhapatnam

Central Government And Public Sector

CTN :40977994

28 Jul, 2025 NA

Chamba - Himachal Pradesh

Tender For supply of ms plate size 16mm , ms plate size 18mm , ms plate size 20mm , ms plate size 28mm , 90 degree ms angle size 25mm , 45 degree ms angle size 25mm , ms hex bolt with nut 12x1.75x40 mm , hex screw m24x3x100 lg, material ss410 , hex screw m24x3x50, material ss410 , hex screw m24x3x125 lg, material ss410 , ss hex bolt with nut 3by8mmx16gx1 inch , ms hex bolt with nut 32x3.5x350 , ss hex bolt with nut 20x2.5x100 , ms hex bolt with nut 12x1.75x35 , ms hex bolt with nut 18x2.5x120 , ss ball valve 1 inch class 150 female thread , ss 90 degree elbow 1 inch , ss 45 degree elbow 1 inch , ss ball valve 1.25 inch class 150 female thread , ss 90 degree elbow 1.25 inch , ss 45 degree elbow 1.25 inch , 1by2 inch ball valve steel , 1by2 inch 90 degree elbow steel , 1by2 inch 45 degree elbow steel , d spanner 18x19 , ring spanner 18x19 , slide wrench 8 , slide wrench 12 , pipe wrench 8 , pipe wrench 12 , 1by2 to 1by4 inch female adapter npt , 1by4 to 1.25 inch ss adapter with 60 degree cone both side , 1by4 to 1by2 inch male adapter npt , 3by4 to 1by2 inch male adapter npt , 3by8 inch female to 1by2 inch male adapter npt , nrv 6 inch check valve , nrv 4 inch check valve , ms union 1by2 inch , ms rod hexagonal 25mm , ms rod hexagonall 40mm, 1.5 inch , 20 inch flange class 300 , brass rod 2 inch , brass rod 1.5 inch , brass rod 2.5 inch , foot valve 3 inch , pvc suction hose pipe 3 inch dia , pvc suction hose pipe 6 inch dia , clamp 4 inch , clamp 6 inch , 1by2 inch x 14 tpi bsp hss round die , o-ring 3mm , o-ring 4mm , o-ring 5.3mm , o-ring 5.7mm , o-ring 6mm , o-ring 8mm , o- ring 8.5mm , o-ring 9mm , rubber gasket sheet size 2mm , rubber gasket sheet size 3 mm , rubber gasket 2.5mm exact , steel putty 3473 , thread locker 263 , si 5900 flange sealant , sealant 495 , super metal composite 1111 , maintain 100 , m seal 75gm , hydraulic sealant 545, 50ml pack , pipe repair kit , sf 790 gasket remover 510 gm , weldon shank 3by4 inch drill bit set 6,8,10,12,16,20 mm , compressor belt size c90 1 34 , filteration plant belt a800, a30 poly f plus , new hp compressor belt 30440903 - 1000015342 , 50 hp blower belt - b3500 b136 , shaper machine belt b56 , auto darkening welding helmet , test hose stauff minimess hose g-1by4 dn4 , elc 50c cover , cutting wheel 4 inch , flap disc 4 inch , buffer wheel ag-4 , abrassive belt with cloth backing, grain- al oxide , cut resistant hand gloves, cut level 4 , die penetration test kit consisting of cleaner, penetrant and developer , filler gauge .02 to 1.00mm, 600mm length , foam-spung for oil soaking 2 inch thick, size- 4 ft x 6ft , plastic can 2 ltr , box spanner 65mm, phosphate finish , bucket 20l , digital vernier caliper , carbide drill bit set 1 to 13mm , tungsten carbide tipped tool for machining , scotch self bonding tape 3.8x9.15x0.075 cubic cm , t30 compressor oil of 5 ltr pack , gland 10mm , taflon tape , ht insulation tape 25mm wide 25m long roll , measuring tape 3 mtr , ss scale of 6inch length , hose wp 700 bar e6 series with coupling set of c604 , marker parmanent type , welding electrode 7018 - 3.15mm , welding electrode 7018 - 4 mm , welding electrode 7018 - 2.50mm , welding electrode 6013 - 3.15mm , welding electrode 6013 - 2.50mm , welding electrode e-308 - 3.15 mm , welding electrode cast iron - 119e size 2.50mm , star coupling rubber buna-n , gasket 2mm non asbestos , caf gasket 3mm thick- non asbestos //bid details 2 / 76

Aerial Maintenance Platform Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector