Latest aerospace Tenders | Government aerospace Tenders

Central Government / Public Sector

CTN :39074401

07 Mar, 2025 NA

Panipat - Haryana

Tender For corrigendum : supply of compressed air foam system (caf) for pp and cdw unit - supply of compressed air foam system (caf) which includes design, engineering, procurement of materials, manufacture, assembly, inspection at seller s works, final documentation including the operational & maintenance manual, testing at seller s works, painting & protection, tagging and lettering as per project specification, mechanical & performance guarantee, packing and forwarding, transportation up to buyer s project site and necessary supporting documentation etc. as stated in material requisition., compressed air foam system (caf) - water mist fire extinguisher 50 ltr. operating pressure 15 bar

State Government

CTN :39373642

24 Feb, 2025 66.0 Thousand

Kishtwar - Jammu And Kashmir

Tender For repair periodical maintenance of truck no jk06 3417 - repairs to the front and rear wheels of the truck by way of their dismantling extraction of worn out/ damage parts, washing with diesel and cleaning with waste cotton cloth and and repairing by way of p/f new f/w oil seals (inner and outer) 02 nos. each, f/w bearings (inner and outer) 01 no. each, f/w brake linings with rivets 08 nos., r/w oil seals ( inner and outer) 02 nos. each, r/w brake linings with rivets 08 nos., greasing of the wheels by filling wheel grease, turning of wheel drums, adjustment of brake by topping up with brake oil and bleeding the air. job includes cost of material, tools and tackles, skilled labour charges, carriages, transportation and all taxes applicable, repairs to the vehicle by way of removing the rubber beading and front main glass of the vehicle and p/fixing of new glass of same model along with rubber beading as the existing main glass has won out its clearance. the job also includes self glowing tail board tape (double colour) 40 mtr and letter writing on the tail board. job includes cost of material, tools and tackles, skilled labour charges, carriage, transportation and all taxes., repair to the transmission system of the vehicle by way of dismantling the propeller shaft, removal of defective parts, p/f of u-j cross assembly -01 no., coupling nut and bolt -08 nos., transmission booster pump 01 no. complete with all assorted nuts and bolts, assembling the propeller shaft to the vehicle and all allied works. job includes cost of material, tools and tackles, skilled labour charges, carriages, transportation and all taxes applicable., repairs to the truck by way of replacement of main leaf spring assembly along with doe-clamps 04 nos., leaf spring bush 08 nos. leaf spring 2nd 02 no. along with replacement of suspension kit. job includes cost of material, tools and tackles, skilled labour charges, carriages, transportation and all taxes applicable

CTN :39430977

13 Mar, 2025 NA

Mumbai - Maharashtra

Tender For supply of 5 , ss sink and table 66x30x34 plus 5 , ss rack 79x24x66 5 shelf , ss veg rack with perforated shelf 48x24x66 5 shelf , ss veg rack 48x18x66 5 shelf , ss veg rack 42x18x66 5 shelf , ss veg rack 43x18x66 5 shelf , ss veg rack 60x24x66 5 shelf , ss veg rack 66x24x66 5 shelf , ss veg rack 52x39x66 4 shelf , ss veg rack 60x24x66 4 pipe shelf , table pick up 48x30x34 plus 18 plus 12 with 2 undershelf with 2 overhead shelf , ss dish landing table 60x24x34 plus 24 , ss shelf pick for rtw 180 72x12x18 plus 12 , pick up counter 72x30x34 plus 18 plus 12 with 2 undershelf with 2 overshelf , planetary mixer 40 ltr , 8 tray deck oven electric , conveyor dish washer , electric tandoor , three burner gas range 66x24x30 plus 5 with 1 undershelf , electric deep fryer , gas deep fryer , deep fryer filter , hot griddle 36x28x34 plus 5 half grill plus half plain , 3 burner gas range 30x30x18 , continental bhatti 36x36x34 with 1 undershelf , roti bhatti 45x28x34 plus 5 with 1 undershelf , chinese range 58x28x30 plus 12 with 1 undershelf , dosa bhatti 45x28x34 plus 5 with 2 undershelf , combi oven 40 tray electric , 3 door undercounter chiller 72x30x34 , idli steamer , 2 door under counter freezer 48x30x34 granite top , 3 door undercounter chiller 72x30x34 granite top , 3 door undercounter chiller 72x30x34 plus 5 granite top , griller 4x4 , 6 slice popup toaster , juicer fruit mixer , mixer dynamix , microwave oven 25ltr , conveyor pizza oven double deck , ss work table 48x30x34 , salamender , roti bhatti with puffer , pulverizer 3 hp , potato peeler , tilting wet grinder 15 ltr , rice cooker tilting 100ltr , electric bratt pan , dough kneader 20 kgs , gn pan trolley , baking tray trolley , fresh air ducting all , exhaust ducting , exhaust hood , staff lockers , walk in chiller and freeze , garbage disposal unit , chapati making machine , ice cream making machine , hot food trolley , industrial vacuum cleaner , ultra sonic rat repellent system , food warmer for food distribution , dosa making machine , floor cleaning machine , egg beater machine , tea coffee machine with dispenser , geyser boiler , water purifier plant , installations and transportation charges

Central Government/Public Sector

CTN :39360317

08 Mar, 2025 NA

Durgapur - West Bengal

Tender For design, engineering, manufacture, assembly, shop testing, shop painting, packing, transportation to site, supervision of erection, commissioning and performance guarantee tests of main trough forced air cooling system

Central Government/Public Sector

CTN :39402454

05 Mar, 2025 NA

Bangalore - Karnataka

Tender For providing of hiring of consultants - milestone/deliverable based - engagement of consulting firm for benchmarking of research and development activities of hal with global aerospace and defence companies, management consultants; strategy consultant, market/resear..

Central Government/Public Sector

CTN :39280973

25 Feb, 2025 NA

Bangalore - Karnataka

Tender For corrigendum : obtaining kiadb approval for hi tech defence and aerospace park at devanahalli , bengaluru

CTN :39224324

22 Feb, 2025 NA

Kutch - Gujarat

Tender For bid to ras providing of repair and overhauling service - aerospace safety equipment electrical; undefined; yes; buyer premises

CTN :39341700

28 Mar, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For upgradation augmentation of shot blasting equipment and shot blasting room including replacement of three motor driven screw lp air compressor for upgradation augmentation of production shop floor (ab and ac bay) at ins eksila - upgradation/ augmentation of shot blasting equipment and shot blasting room including replacement lp air compressor as indicated in part-ii of rfp consists of the following:-, dismantling and degutting of lp air compressors along with all associated equipments and shifting work as specifiied in para 1(1.1)(a) part ii of rfp., lp air compressor, lp air compressor as specifiied in para 3 (3.1) part ii of rfp., dryer unit as specifiied in para 3 (3.1) part ii of rfp., air receiver tank (2000 liters) as specifiied in para 3 (3.1) part ii of rfp., air filter as specifiied in para 3 (3.1) part ii of rfp., acoustic canopy as specifiied in para 4 (4.1)(a) & (b) part ii of rfp., electric power distribution board/ control panel as specifiied in para 4 (4.1)(d) part ii of rfp., dismantling and degutting of shot blasting system along with all associated equipments and shifting work as specifiied in para 1.2 of part ii of rfp., shot blasting system, protection liner & rubber lining as specifiied in para 3(3.2) part ii of rfp., recovery unit as specifiied in para 3(3.2) part ii of rfp., dust collector & exhaust system as specifiied in para 3(3.2) part ii of rfp., shot blasting unit as specifiied in para 3(3.2) part ii of rfp., all other items associated with main eqipment which are mentioned in part ii of rfp [ex para 6(a) & 6(b) etc] part ii of rfp)., civil work for (refers to para 8 of part ii of rfp)., standard accessories (refers to para 9 of part ii of rfp), two years operation & maintenance spares (refers to para 10 of part ii of rfp), special maintenance tools and test equipment (refers to para 11 of part ii of rfp), technical literature / certificates / documentation (refers to para 13 of part ii of rfp), acceptance, testing, trials and commissioning charges (refers to para 14 of part ii of rfp), training (refers to para 16 of part ii of rfp), any other item such as transportation, insurance, freight, packing etc, notes:1. cost of item listed at sl 1 to 12 and 13 (if applicable) are to be quoted in the respective rows of the price bid sheet. 2. bidder not permitted to include cost of items listed at sl 6 to 13 with sl 1 to 5 as lumpsum amount 3. bidder required to mandatorily quote for sl 1 to 5 and 12 failing which bid shall be treated as non bonafide and liable for rejection.4. bidders are mandatorily to quote gst/ taxes as applicable against each serials, falling which bid shall be treated as non bonafide and liable for rejection.

CTN :39050363

27 Feb, 2025 9.35 Crore

Chandigarh - Chandigarh

Tender For corrigendum : provision of clean room facility and interior work in dtis eo at aero hub sipcot aerospace park vallam vadagal sriperumbudur taluk kanchipuram district tamilnadu 631604 ref drg annexure a and b

Central Government/Public Sector

CTN :39384251

12 Mar, 2025 NA

Kanpur - Uttar Pradesh

Tender For supply of 13 types of items-np25004547 , np25004548 , np25002715 , np25004549 , np25004554 , np25004555 , np25004896 , np25006078 , np25004897 , np25004558 , np25004557 , np25006079 , np25004556-, pin crimping tool (m22520/1-01), crimp tool tool frame part no.: m22520/1-01 (as per mil standard), remark:, 1) technical leaflet of the quoted item conforming the "mil' standard will be required along with quote for technical acceptance., 2) warranty-1 year or more is required along with supply of item., 3) oem coc (manufacturer's certificate of conformance) is required along with supply of item.., 4) oem authorisation certificate is required with gem enquiry no mentioned on the certificate along with quotation in case of quoted by dem authorised distributer., 5) vendor must have supplied similar tools in past to aviation/aerospace industry & may be requested to provided list of customer of aviation/ aerospace industry along with quotation., 6) condition: brand new-manufacturing year 2024 cor later., turret (m22520/1-02), turret head tool frame part no.: m22520/1-02 (as per mil standard), remark:, 1) technical leaflet of the quoted item conforming the "mil' standard will be required along with quote for technical acceptance, 2) warranty-1 year or more is required along with supply of item., 3) oem coc (manufacturer's certificate of conformance) is required along with supply of item., 4) oem authorisation certificate is required with gem enquiry no mentioned on the certificate along with quotation in case of quoted by dem authorised distributer., 5) vendor must have supplied similar tools in past to aviation/aerospace industry & may be requested to provided list of customer of aviation/ aerospace industry along with quotation., 6) condition: brand new-manufacturing year 2024 or later., crimp tool m22520/2-01, crimp tool tool frame part no.: m22520/2-01 (as per mil standard), remark:, 1) technical leaflet of the quoted item conforming the "mil" standard will be required along with quote for technical acceptance, 2) warranty -1 year or more is required along with supply of item., 3) oem coc (manufacturer's certificate of conformance) is required along with supply of item., 4) oem authorisation certificate is required with gem enquiry no mentioned on the certificate along with quotation in case of quoted by dem authorised distributer., 5) vendor must have supplied similar tools in past to aviation/aerospace, pin crimping tool (m22520/1-01), crimp tool tool frame part no.: m22520/1-01 (as per mil standard), remark:, 1) technical leaflet of the quoted item conforming the "mil' standard will be required along with quote for technical acceptance., 2) warranty-1 year or more is required along with supply of item., 3) oem coc (manufacturer's certificate of conformance) is required along with supply of item.., 4) oem authorisation certificate is required with gem enquiry no mentioned on the certificate along with quotation in case of quoted by dem authorised distributer., 5) vendor must have supplied similar tools in past to aviation/aerospace industry & may be requested to provided list of customer of aviation/ aerospace industry along with quotation., 6) condition: brand new-manufacturing year 2024 cor later., turret (m22520/1-02), turret head tool frame part no.: m22520/1-02 (as per mil standard), remark:, 1) technical leaflet of the quoted item conforming the "mil' standard will be required along with quote for technical acceptance, 2) warranty-1 year or more is required along with supply of item., 3) oem coc (manufacturer's certificate of conformance) is required along with supply of item., 4) oem authorisation certificate is required with gem enquiry no mentioned on the certificate along with quotation in case of quoted by dem authorised distributer., 5) vendor must have supplied similar tools in past to aviation/aerospace industry & may be requested to provided list of customer of aviation/ aerospace industry along with

Aerospace Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector