Latest aggregated stone Tenders | Government aggregated stone Tenders

CTN :39491742

07 Mar, 2025 33.31 Lacs

Dausa - Rajasthan

Tender For gsb wbm work ward no. 26 to 55, dausa. - providing, laying, spreading and compacting of granular sub-base by providing close graded material (table 400-1), spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with vibratory roller to achieve the desired density, complete as per mort&h specification clause - 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion., grading - iii material, coarse graded granular sub-base material 53 mm to 26 .5mm, carriage of materials (by mechanical means) stone, boulders, gravelly material 5 km, dressing of earth work in surface excavation including cutting and filling upto 30cm depth including disposal of excavated earth upto 50m and lift upto 1.5 m., construction of embankment with approved material obtained from borrow pit with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8-10 tonne to meet requirement of table 300-2 including cost of compensation for earth taken from private land complete as per mort&h specification clause 305. (lead taken upto 5 km), random rubble masonry with hard stone in foundation and plinth : cement mortar 1:6 (1 cement : 6 coarse sand), providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)drain work, providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level :1:4:8 (1 cement : 4 fine/ coarse sand : 8 graded stone aggregate 40 mm nominal size)., providing at site, lowering & laying in trenches, aligning & jointing of rcc pipes np3 class (with s/s ends) is: 458 - 1988 (amended up to date) marked and pipes from 300 mm upto 2000 mm manufactured through vertical / vibrated casting process all levels with rubber gaskets (epdm/sbr) for sewer lines as per is: 5382 (including cost of rubber gaskets lubricants) as per drawing, sectional hydro testing of the sewer pipe line (including cost and conveyance of water to site for testing) etc., complete as directed by engineer. note : e/w to be measured and paid separately. length of pipe shall be measured in between the outer wall of two manholes / inspection chambers. pipe in the manhole/inspection chamber s wall shall deemed to be included in the item of manhole/inspection chamber shall not be payable., 450 mm internal diameter, 600 mm internal diameter, hydraulic excavator of 1 cum bucket (with deasel, driver & helper)

CTN :39487539

04 Mar, 2025 33.31 Lacs

Dausa - Rajasthan

Tender For gsb & wbm work ward no. 26 to 55, dausa.-, providing, laying, spreading and compacting of granular sub-base by providing close graded maternal (table 400-1), spreading in uniform layers with motor grader on prepared surface, mixing by max in place method with rotavator at omc, and compacting with vibratory roller to achieve the desired density, complete as per mort&h specification clause 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion, , grading-iii maternal, , coarse graded granular sub-base material 53 mm to 26.5mm, , carriage of materials (by mechanical means) stone, boulders, gravelly material 5 km, , dressing of earth work in surface excavation including cutting and filling upto 30cm depth mcluding disposal of excavated earth upto som and lift upto 15 m, , construction of embankment with approved material obtained from borrow pit with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8-10 tonne to meet requirement of table 300-2 including cost of compensation for earth taken from private land complete as per mort&h specification clause 305 (lead taken upto 5 km), , random rubble masonry with hard stone in foundation and plinth cement mortar 16 (1 cement 6 coarse sand), , providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work upto plinth level 124 (1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal size), , drain work, , providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work upto plinth level, , 148 (1 cement 4 fine/coarse sand 8 graded stone aggregate 40 mm nominal size), , providing at site, lowering & laying in trenches, aligning & jointing of rcc pipes np3 class (with s/s ends) is. 458-1988 (amended up to date) marked and pipes from 300 mm upto 2000 mm manufactured through vertical / vibrated casting process all levels with rubber gaskets (epdm/sbr) for sewer lines as per is 5382 (including cost of rubber gaskets lubricants) as per drawing, sectional hydro testing of the sewer pipe line (including cost and conveyance of water to site for testing) etc., complete as directed by engineer note e/w to be measured and paid separately length of pipe shall be measured in between the outer wall of two manholes /inspection chambers. pipe in the manhole/inspection chamber's wall shall deemed to be included in the item of manhole/inspection chamber shall not be payable., , 450 mm internal diameter, , 600 mm internal diameter, , hydraulic excavator of i cum bucket (with deasel, driver & helper)

State Government

CTN :39447882

25 Mar, 2025 NA

Goa - Goa

Tender For supply of consumable dental materials (prostho) - cold mould seal liquid 3 1ts/5 1ts can self cured acrylic resin powder (pink), 3 kg. jar , self cured acrylic resin powder (clear) 3 kg. jar , self cured acrylic resin liquid, 4 litres can , heat cured acrylic resin powder (pink), 3 kg jar , heat cured acrylic resin liquid, x-linked, 4 litres can , heat cured acrylic resin powder, 3 kg. jar, clear , heat cured acrylic resin powder (venied), 3 kg. jar n.b.: powder+liquid should be from same brand/company. , cross-linked acrylic resin teeth sets,(full),fluroacert in vita shades 1 x28( in various shades,sizes and shapes) cross moiild size will be given at the time of order. , x-linked acrylic resin teeth sets, (partial) fluoracert in vita shade 1 x 6 set i) maxillary anterior 1 x 6 set (in various vita shades, sizes and shapes) mould size will be given at the time of order. , mandibular anterior 1 x 6 set (in various shades, sizes and shapes) mould size will be given at the time of order. , x-linked acrylic resin teeth sets, partial, 1 x 6 set maxillary and mandibular posteriors , dental plaster to be strictly supplied in vaccum sealed packs of 3 kgs (n.b.: it should be supiled in 3/5 installments in moisture proof packets packaging (vaccum sealed packets). , dental stone. 400 packets yellow colour, 250 packets blue colour (3 kg packets) (n.b.: it should be supiled in 3 installments in moisture proof packaging (vaccum sealed packets). , boxing wax, 156 mm length x 40mm width packet of 6 sheets. , beading wax strip of 245 mm long 12 strips in a packet , sticky wax, pack of 10 sticks , modelling wax (regular), packet of 225 gms. , modelling wax (hard), packet of 225 gms. , irreversible hydrocolloid impression material 1.125 kg packs (n.b.: it should have an expiry of 2 to 3 years from the date of supply) , chromatic alginate 453 gms. net. vaccum sealed pouches (n.b.: it should have an expiry of 2 to 3 years from the date of supply) , impression compound, 225gms, packet of 5 round cakes. , greenstick low fusing impression compound tracing sticks, packet of 10 , elastomeric impression materials a) addition silicon all , addition silicon putty, 900 ml (base + catalyst) , addition silicone light body cartridge (pk of 4 cartridge, 50ml each) same brand as putty (item number 24.01) , addition siliconeregular body (monophase)180ml (tubes) same brand as putty (item number 24.01) , addition silicone heavy body 50ml (pk of 4 cartridge, 50ml each) tray.same brand as putty (item number 24.01) , addition siliconeultra light/extra light body 50ml (pk of 4 cartridge)same brand as putty (item number 24.01) , mixing tips compatible with impression material cartridges , intraoral tips compatible with impression material cartridges mixing tips , tray adhesive universal , dispending gun 1:1 ratio , condensation silicon (starter kit) with putty 900ml catalyst and light body , polyether medium body (polyether) , polyether light body (polyether) , tray adhesive polyether , zinc oxide eugenol impression paste engenol 85 gms, zinc oxide-125 gms and mixing pad. , non eugenol/eugenol free impression paste. , pressure indicator paste , tissue conditioner , denture relining material chair-side denture relining material medium cartridge pate 26gmx1 primer 10 ml x1 drip cap for primer x1 plastic cup x1 mixing tips xs x10 spatulax1 brush x1 coarse point x1 finishing wheel brown x1 (sofreliner tough m) , chair-side denture relining material soft cartridge pate 26gmx1 primer 10 ml x1 drip cap for primer x1 plastic cup x1 mixing tips xs x10 spatulax1 brush x1 coarse point x1 finishing wheel brown x1 (sofreliner tough s) , temporary crown & bridge material with dispensing gun & mixing tips with 100 additional mixing tip. (integrety protemp 4) , restorative composite ( luna 3m) , a1 , a2 , a3 , a3.5 , c1 , c2 , c3 , b1 , b2 , microtip applicator, (pack of 100) , composite finishing kit of extra thin 12.7mm 1/2 in -120 nos and 9.5mm 3/8 -120 nos in soflex disc c

Central Government/Public Sector

CTN :39429677

14 Mar, 2025 1.20 Lacs

Bhopal - Madhya Pradesh

Tender For tender for supply of items required for automobile lab 2 - output voltage 12 and 24 volts- compatibility 12v car batteries and 24-v commercial batteries- automatic detection battery types whether 12v or 24v- input voltage 230v on 50 hz-protection class ip 65 , led rechargeable torch light- overcharge protection- 250 lumens 3w torch and 1w sidelight- li-ion battery with charging cable-power source - 5v dc- battery cell composition - lithium ion , single core hrfr pvc insulated flexible cables 2 and half sqmm- color red - lenth 90 meter- test voltage 1100 volts-rohs compliant-core single core multi string , single core hrfr pvc insulated flexible cables 2 and half sqmm- color black - lenth 90 meter- test voltage 1100 volts-rohs compliant-core single core multi string , 100kg commercial weighing scale high quality platform size 300cm x300 cm- maximum weighing capacity 100 kg- certification yes iso certified with calibration/ verification certificate- accuracy precision 10 gram , grit dual side grit 240 and 800 -honing stone with non-slip base , grit dual side grit 100 and 320 -honing stone with non-slip base , colour black- included components cartridge- material thermoplastic elastomers- pattern facepiece respirator- size m- style respirator-niosh approved , cartridge suitable for above mentioned mask - niosh approved , filter class n95- size one size - material cotton- style cartridges-features a n95 cotton filter can be used with cartridges- fit for above mentioned masks , 15pcs drill brush attachment set power scrubber cleaning for car drill machine brushes for cleaning abs plastic drill brushes for cleaning with extension rod- type versatile 15-brush set , ms square profile pipe 25mmx25mm thickens 2.5 mm- size 25 mm x 25 mm- thickness 2 and half mm - length 6 meters- material isi mark mild steel , product type castor wheels- material mild steel body with nylon wheels- load capacity 600 kg- mount type swivel type- height 50 mm-lock type manual - wheel dimension 1 inch , material alloy steel- colour red- load capacity 600 kilograms- material alloy steel , carbon steel furniture lifter with heavy duty roller pads- model name furniture dolly with moving heavy furniture tool set 360 degre shift wheels- load capacity 300kg max capacity- product , heavy duty bed castor wheels for furniture counter with poly carbonate wheels- type heavy duty- wheel size 50 mm- no of wheels 6 wheels each- top plate rotation 360 degree- material metal- load capacity 600 kg quantity set of 4 wheels , retractable leveling machine casters wheel - heavy duty machine retractable casters wheel loading capacity 50 kg- mounting type plate mount- caster type swivel- material ivory powder , enterprise handheld ground station smart controller hdmi combo hd smart 7 inch video transmission 4g ram 64g rom 4g - 64g android - item type controller- channels 16 physical channels 16 communication channels- transmission range 15 km , 3-axis assembled brushless gimbal frame with motors and storm 32 controller for rc drone- type drone gimble- specification t brushless motor motor models 2206 - driver board storm32bgc- working voltage 3-4 s battery , ravizaa male straight full body mannequin display 6 feet skin color- colour skin- height 6 ft- type male- material plastic- item weight 12 kilograms , 1 and half sqmm 2 core black copper pvc insulated sheathed flexible cable- category multicore flexible cables- conductor copper- core 2- diameter 1and half sqmm- insulation type pvc- tested voltage 1100 v- length 30 m

State Government

CTN :39373998

07 Mar, 2025 33.63 Lacs

Sangrur - Punjab

Tender For various works in sub tehsil longowal - patwari cabins:-scraping cement outer plaster, scraping cement inner plaster, cement rendering on plaster 1mm thick, 12.5 mm thick cement plaster 1:4, 20mm thick cement paster 1:4, first class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level., 115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1:4 cement mortar in superstructure, 12.5 mm thick cement plaster 1:5, 20mm thick cement paster 1:5, preparation of plastered or concrete surface or painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish, applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface, distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade, finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sq, providing and laying vitrified floor tiles in different sizes in light colour shades made using full body technology (thickness to be specified by the manufacturer) with water absorption s less than 0.08% and conforming to is : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) size 600x600 mm, providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. the tiles should have humidity resistance (rh) of 99%, light reflection > 85%, thermal conductivity k = 0.052 - 0.057 w/m k, fire performance as per (bs 476 pt - 6 &7)in true horizontal level suspended on interlocking t-grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized@120 gsm) comprising of main t runners of 15x32 mm of length 3000 mm, cross t of size 15x32mm of length 1200 mm and secondary intermediate cross t of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter m-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and l-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main t . the system should rest on periphery walls /partitions with the help of gi perimeter wall angle of size24x24x3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall s.s. screws. the exposed bottom portion of all t-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. the work shall be carried out as per specifications, drawings and as per directions of theengineer-in-charge.with 16 mm thick beveled tegular mineral fibre false ceiling tile (nrc 0.55 to 0.6)size 595x595 mm, earth work in excavation in foundations trenches etc. in all kinds of soil where pick-jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres., cement concrete 1:8:16 with stone aggregates 40mm gauge mixing by mechanical means using concrete mixer volumetric type, first class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth, base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mix

Central Government/Public Sector

CTN :39372689

03 Mar, 2025 18.85 Lacs

Singrauli - Madhya Pradesh

Tender For supply and laying stone metal for road during monsoon at block-b project - item description/ heading, water bound macadam:providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density as per clause 404 of specification. grading- i (63 to 45mm) using screening type-a (13.2mm agg.), total impact of gst for the purpose of ctc

Aggregated Stone Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector