Latest air box Tenders | Government air box Tenders

Central Government/Public Sector

CTN :41640223

19 Sep, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of 1)hose connection for air suspension syste [hose connection for air suspension system of emu /demu motor & trailer coaches (i) from bellow to levelling valve, size:19 mm bore x 550 mm long to icf drg. no. dc/emum/asr-0-5-009, alt-] 2)hose connection 1/2 inch bore (12.5 mm b [hose connection 1/2 inch bore (12.5 mm bore) of 700 mm length (from under frame to bogie) to icf drg.no.emu/m-3-5-079,item-3 alt. s/2. ]

Central Government/Public Sector

CTN :41625642

03 Sep, 2025 NA

Guwahati - Assam

Tender For supply and installation of csd shipra 01nos. cutter ladder hose/bellow

CTN :41638603

08 Sep, 2025 NA

Ahmednagar - Maharashtra

Tender For supply of magmon ptb c gas analyser , rubber inflating bellow with valve and 4mm outlet connection , rs 485 serial communication interfacing link with db9 connector , customized hp 2 stage ss make cylinder regulator , 12.6 v bty charger 1a , fine pressure controller cum pressure safety device

CTN :41064378

09 Sep, 2025 1.47 Lacs

Baran - Rajasthan

Tender For corrigendum : requirement of bellow/ gaiter for pneumatic power cylinders of dampers installed in main boiler and aux boiler of (2x660 mw), csctpp, rvunl,chhabra

CTN :41625999

18 Sep, 2025 NA

Khammam-T - Telangana

Tender For supply of rubber expansion bellow for rotary feeder as per drg. no. hwpm/mu/289(rev-1) & annexure ts

CTN :41608516

12 Sep, 2025 26.59 Lacs

Noida - Uttar Pradesh

Tender For supply of cmv spare parts for traction department - engine stoping solenoid coil of dg set, dg set start/stop relay, cab selector switch, mode selector switch, direction selector switch, green indicator, red indicator, yellow indicator, 8 pin relay with base, 11 pin relay with base, throttle valve, transmission filter with o ring, compressor to after cooler hodge pipe, transmission oil pressure sensor, hydraulic filter (cmv tank), lower spring pad, fuel indicator (digital), filter (genset), air line hose, coolant linc clamp hose, service brake cylinder bellows, 0.5mm gasket, rpm cum hour meter (digital), rpm meter (digital), parking brake lever cover, ampere meter assembly with gauge -100a to +100a, lower rubber washer, motor-0.3 kw(slew), induction motor (flange- mounting), relief valve, load holding valve, brake cylinder (f ), brake shoe, spring brake chamber, unloader valve, 1" check valve, safety valve rupe j-1 set at 8.5kg/sq/cm2, auto drain valve with timingreservoir typr d-1, j-air filter with drain cock, 3/8" iso cock with vent, magnet valve 24 v dc normallyclosed, a-9 auto brake valve, pneumatic horn (double tone), wiper assembly electrical, 8" brake cylinder , jsl type withtrunion, c-2 w relay valve (bc), t-c, 2 way throttle control valve, pump 34cc, pressure regulating valve, battery main s/w, charging alternator, cabin selector switch, lube oil temp, sensor, water temp sensor, lube oil press sensor, trans oil temp sensor, relay, 8p, thermostat, ignition s/w, engine stop s/w, by pass s/w (p/b), relay 11 p with base, fuel level gauge, trans temp gauge, transmission selector s/w 3 way, toggle s/w 2w, toggle s/w 1w, search light assly with bulb, speed sensor, limit swich, rubber kitb for a9 brake valve, kit for n1 reducing valve, kit for c3 w distributin valve, kit for d1 emergency valve, kit for sa9 brake valve, kit for brake cylinder 8" brake with trunion, kit for brake cylinder 8" brake with trunion, trans selector s/w 2 way, diode complete with wiring, 7.5 kva prakash make dg set diesel filter, 7.5 kva prakash make dg set lub oil filter, crimped hose fitted with hose end m 36 x 2, l-1700 mm, crimped hose fitted with hose end m 30 x 2, l-800, crimped hose fitted with hose end m 36 x 2, l-3000mm, crimped hose fitted with hose end m 36 x 2, l-2600mm, crimped hose fitted with hose end m 30 x 2, l-2300mm, crimped hose fitted with hose end m 36 x 2, l-2700mm, crimped hose fitted with hose end m 36 x 2, l-1000mm, crimped hose fitted with hose end m 30 x 2, l-2500mm, crimped hose fitted with hose end m 16 x 1.5, l-3500mm, crimped hose fitted with hose end m 16 x 1.5, l-2500mm, crimped hose fitted 100 with both end l-1300 mm, crimped hose flexible hose fitted with hose end,l-450 mm, crimped hose fitted with hose end l-2500 mm, crimped hose fitted with hose end l-1000 mm, crimped hose fitted with hose end l-800 mm, ss flexible bellow hose size -1" x 3 mtr, main connector hose 3/8", main elbow hose 3/8", air cleaner (filter 1), air cleaner (filter 2), transmission oil filter, transmission oil filter element

CTN :41424728

03 Sep, 2025 NA

Parganas - West Bengal

Tender For providing of custom bid for services - dismantle and fitment of new x axis roll up cover and y axis bellow cover for 08 nos hsm 320 and 05 nos hmc 320m horz mach cen tre installed at cnc i and ii section as per annx ii rfi along with supply of material as on wh..

corporations/Associations/Others

CTN :41474668

01 Sep, 2025 NA

Mettur - Tamil Nadu

Tender For procurement of complete seal kit with nitrile bladder for hydraulic loading oil system filter element for gear box lub oil unit and roller expansion duct boot air bellow 03 items

Central Government And Public Sector

CTN :41602196

18 Sep, 2025 NA

Narora - Uttar Pradesh

Tender For supply of supply of m/s flexican bellows & hoses pvt ltd make lp turbine metallic bellow assembly for 236 mwe

CTN :41488066

29 Aug, 2025 32.52 Lacs

Bhubaneswar - Odisha

Tender For procurement of furniture for sihm bolangir - supplying fitting and fixing of full back executive chairs are of size 76.3 (w) x 76.3 (d) x 99.5 - 110.5 (h) x 43.3 -54.3 (sh) cm . the seat assembly is made up of 1.2 +0.1cm. thick hot-pressed plywood measured as per qa method described in ocp-qlta-p14-18, upholstered with fabric upholstery covers and moulded polyurethane foam of size 47.0 cm. (w) x 48.0 cm. (d) .the back asembly is made of powder coated (dft 40-60 microns) tubular frame of b 2.54 +0.03cm. x 0.2 +0.016cm.thk. ms erw tube designed with contoured lumbar support for extra comfort. the back is upholstered using net fabric with high tenacity yarn of size 46.5 cm. (w) x 60.5cm. (h) . the hr polyurethane foam is moulded with density =45+/-2 kg/m and hardness load 16 + 2 kgf as per is:7888 for 25% compression.the one-piece armrests are injection moulded from black co-polymer polypropylene.the mechanism is designed with the following features: 360 revolving type. 17 t2 maximum tilt on pivot at centre upright position locking. tilt tension adjustment.the powder coated (dft 40-60 microns) tubular frame is cantilever type & made of b 2.54 +0.03cm. x 0.2 +0.016cm.thk. m.s. er.w. tube. the pneumatic height adjustment has an adjustment stroke of 11.0 +0.3cm.the bellow is 3 piece telescopic type and injection moulded in black polypropylene.the pedestal is injection moulded in black 33% glass-filled nylon66 and fitted with 5 nos. twin wheel castors. the pedestal is 6c.3 +0.5cm. pitch-center dia. (76.3 +1.0cm with castors.). make : godrej/durian/geeken/ or equivalent as directed by e.i.charge, supplying fitting and fixing of executive tables are of size 120 (l) x 60 (w) x 75 (h) cm with hing door storage width 35.0 cm outer to outer . work surface,modesty panel,under structure & hinge door storage should be made of 25mm thick pre-laminated twin board of e1-p2 grade and approved shade confirrming to is-12823; 1990,edge banded with matching 2 mm thick pvc lipping.gromet provided on work surface for wire management.handle & cam lock should be provided on hinge door of storage. make: godrej/durian/geeken/ or equivalent as directed by e.i.charge, supplying fitting and fixing of educational study / training units are of size 124 (l) x 113 (w) x 75.72 (h) cm ,desk-top panel,modesty panel & back panel should be made from 18mm thk pre-laminated twin board (e1/p2 grade) with pvc edge banding on all sides.the panels have corners rounded for safety usage. all side metal frames and cross connectors are made from combination of 25.4 x1.2 mm thk(approx. 18 swg) round erw tubes ,31.8 x 1.2 mm thk(approx. 18 swg) round erw tubes and 28.6 x 1.2 mm thk(approx. 18 swg) round erw tubes(as per is:7138) which are welded together.the welded structures and cross connectors afe coated with min. 45 micron thickness of epoxy polyester coating.back supports which are provided at the rear back are made of 50.8 x 25.4 x 1.2 mm thk(approx. 18 swg) rectangular erw tubes(as per is:7138).the tubes are coated with min. 45 micron thickness of epoxy polyester coating.the storage shelves are made from 0.6 mm thk ms sheet(as per is:513) fixed below the desk top panel and are coated with min. 45 micron thickness of epoxy polyester coating.hooks are provided on the vertical side frames on both sides of the desk for hanging bags/bottles. they are made from 2 mm thk ms sheet(as per is:513) and are coated with min. 45 micron thickness of epoxy polyester coating.the understructure is assembled using m6 trilobular screws(as per din 7500) with zn blue plating(as per is 1573:1986).godrej/durian/geeken/ or equivalent as directed by e.i.chargecompact laminate seat and back panels are assembled using m6 countersunk trilobular screws(as per din 7500) with zn black plating(as per is 1573:1986).spacers are provided on the top of round tubes for wooden panels fixing.they are made of pp glass filled(30%).plastic caps made of pp copolymer(3530 grade) are also provided on t

Air Box Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government And Public Sector