Latest air compressor screw Tenders | Government air compressor screw Tenders

Central Government/Public Sector

CTN :42817154

03 Dec, 2025 NA

Nagpur - Maharashtra

Tender For one coach set of 160kn air spring assembly for fiat type bogie as per specn. rdso str no. rdso/cg/s/23002, rev-nil, scope of supply shall be as per clause 4.1 of rdso str no. rdso/cg/s/23002, rev-nil. each coach set will consist of four air spring assembly. the following items shall be supplied as per sl.no. 12 of annexure #viii of rdso str no. rdso/cg/s/23002, rev-nil. as loose and packed separately per air spring assembly. a) high tensile hexagonal socket head cap screw - 4 nos. b) hardened and tempered washer - 4 nos. c) prevaling torque type hexagonal nut m20 - 4 nos. the following additional spares also to be supplied and packed separately per coach set. i) sealing o- rings - 2 nos. ii) high tensile hexagonal socket head cap screw # 4 nos iii) hardened and tempered washer - 4 nos. iv) prevaling torque type hexagonal nut m20 -4 nos. special condition : 1. fasteners shall be of tvs (or) unbrako (or) tuff make only. 2. packing as per drg.no. icf/j&t/sk- 1718.alt 'b'. 3. rdso approved latest drawings of tendered item to be attached by firm. make: - frontier accepted make/brand: fsl(warranty period: upto 72 months from the date of delivery.)

Central Government/Public Sector

CTN :42475132

28 Nov, 2025 90.36 Lacs

Jagatsinghapur - Odisha

Tender For corrigendum : supply of setscrew socket , ring retaining , shim , washer , key , nut-bearing , seal o-ring , lock washer , locknut , seal , seal g , collar seal , seal oil , ring , shaft as-idler , valve gp-che , orifice , bolt , circlip , race , thrust washer , nut- jam , seal o ring , gasket , valve as-check , catridge gp- turbocharger , screw-adjusting , gasket cyl head , gasket- oil pan , valve as , bolt high-temperature , retainer , seal- o-ring

Central Government/Public Sector

CTN :42445061

21 Nov, 2025 11.71 Lacs

Ganjam - Odisha

Tender For corrigendum : supply of major service kit for main bearing, part no. 61239787-31 , major.kitconv nbr, nx400 or 900, part no. 61209798-30 , hex.socket head cap screw m8x20 a4-80, part no. 61194068-84 , hub, large end, part no. 61239758-81 , screw, part no. 61194068-59 replace by 22171107 screw , thrust plate, part no. 61023660-01 , supporting ring nx400, part no. 00533020-01 , bushing, part no. 00527034-01

State Government

CTN :42334379

01 Dec, 2025 NA

Multi City - Telangana

Tender For corrigendum : tggenco - nshes - supply of certain consumables at nshes, nagarjunasagar. - fevicol sr-998 1kg, bearing grease, 1kg, molykote br2 plus, rustolene (in 1 litre cans), bearings grease of servo make (in 10 kg pack), asbestos cloth, 3mm thick, 1 mtr width, welding helments sigma brand, brush, paint. size:50 mm., length:2 inch, brush,paint, size:75 mm., length:3 inch, wire brushes, 5 rows, goggle: type:grinding, rod nylon, 20mm thick, pvc dotted cotton hand gloves, pressure gauge, 0-15kgf/cm2,4 inch, 3/8 inch bsp, teflon tape size: 12.5x12mtrs. x0.075mm, cutting wheels ag4, grinding wheel ag4, wheel, buffing, sponge, 6 inch x 3.5 inch x 2 inch, abrasive cloth, type:rough, material:emery, grit-36, size: 9 inch x 11 inch, abrasive, cloth, type:smooth, material:emery, grit-100, size: 9 inch x 11 inch, braided pvc flexible hose for air, id:12.5 mm, working pressure: 7.5 kg/cm2, nylon braided rubber hose,id-24mm,od-34mm, working pressure 15kg/sqcm, oxygen regulator, two stage with two gauges, make: esab, acetylene regulators, 2 stage with 2 guage, make: esab, neoprene rubber chord 10 mm dia, rechargeable torch light, 30watt, model:digi led dl30, make: eveready, nylon cable ties, size: 400 mm, tie, cable, nylon, size: 300mm, tie, cable, nylon, size: 250mm, tie, cable, nylon, size: 200mm, tie cable, nylon, size: 150mm, tie cable, nylon, size: 100mm, terminal block, porcelian, 2pin,6a, terminal block, plastic, 2pin,6a, copper lug, 1.5sqmm, rectangular-pin type, with ins sleeve, copper lug, 1.5sqmm, fork type, with ins sleeve, for 4mm stud, copper lug, 1.5sqmm, ring type, with ins sleeve, for 6mm stud, copper lug, 2.5sqmm, rectangular-pin type, with ins sleeve, copper lug, 2.5sqmm, fork type, with ins sleeve, for 6mm stud, copper lug, 2.5sqmm, fork type, with ins sleeve, for 4mm stud, lug,copper, 2.5sqmm, ring, pre insulated, double grip6mm, copper lug, 2.5sqmm, ring type, with ins sleeve, for 10mm stud, copper lug, 2.5sqmm, ring type, with ins sleeve, for 4mm stud, copper lug, 4sqmm, ring type, with ins sleeve, for 10mm stud, copper lug, 4sqmm, ring type, with ins sleeve, for 8mm stud, copper lug, 4sqmm, ring type, with ins sleeve, for 6mm stud, tape, electrical, type:insulation, material:pvc, color:red, width: 18mm, length: 7 mtr, tape, electrical, type:insulation, material:pvc, color:yellow, width: 18mm, length: 7 mtr, tape, electrical, type:insulation, material:pvc, color:blue, width: 18mm, length: 7 mtr, tape, electrical, type insulation, material:pvc, color:black, width: 18mm, length: 7 mtr, bolt,w/nut, spring and flat washer, ht gr. 10.9, m20x98 mm, half thread, bolt,w/ nut and sprig washer, ht gr. 10.9, m20x60 mm,full thread, bolt w/nut and spring and flat washer, ht gr. 10.9 m16x70 mm, full thread, bolt.w/nut and spring and flat washer, ht gr. 10.9 m16x45 mm, full thread, bolt,w/nut and spring and flat washer ht gr. 10.9. m12x40mm,full thread., bolt w/ nut and spring and flat washer, m20x80 mm, ht gr.10.9, half thread, dye penetrant testing (dpt) kit containing cleaner, penetrant and developer, pack of 03 nos., chloroprene rubber o-ring cord. dia:6 mm, length: 10 mtr., chloroprene rubber o-ring cord, dia:8 mm, length: 10 mtr., fuse hrc 32a, 500v ac, din, s-00, make: siemens, fuse hrc 63a,500v ac, din, s-00, make: siemens, fuse, hrc, 200a, 500v ac, din, s-00 make: siemens, terminal block, bakelite, 2 way,6a 230v, terminal block bakelite 3 way 16a 415v, terminal block bakelite 4 way 30a 415v, terminal block, porcelian 3 way,164,415v, nylon rope diameter: 12mm, colour: yellow/white type: braided, length: 100 meters roll, gas cutting hose (red). (1 no may be read as 1 meter), gas cutting hose blue (1 no, may be read as 1 meter), socket countersunk head cap screw, m8x20 mm. allenkey size: 5mm make: unbrako (part no. 103340)

Central Government And Public Sector

CTN :42816518

21 Nov, 2025 NA

Bangalore - Karnataka

Tender For supply of high tensile socket head cap screw

Central Government And Public Sector

CTN :42816519

21 Nov, 2025 NA

Bangalore - Karnataka

Tender For supply of high tensile socket head cap screw

Central Government And Public Sector

CTN :42816595

21 Nov, 2025 NA

Bangalore - Karnataka

Tender For supply of high tensile socket head cap screw

Central Government/Public Sector

CTN :42564487

28 Nov, 2025 NA

Kanpur - Uttar Pradesh

Tender For corrigendum : tender for supply of counter sunk bolt , bolt c s k-shear , bolt c sk-shear , bolt hex shear & tension , bolt-hex head , hex-head bolt , bolt hex shear & tension , bolt special-100deg c sk head , 100deg c sk head bolt-cor res , rivet c sk head , rivet alt hs1005-32-8 , c sk head rivet alt hs1005-40-8 , rivet- c sk head , univ round head rivet alt hs1006-24-6 , univ round head rivet , univ head rivet alt hs1006-32-6 , univ round head rivet , univ round head rivet alt hs1006-40-8 , rivet round head , cs k rivet alt hs1014-26-5 , cs k rivet alt hs1014-26-9 , c sk head rivet , csk screw , csk bolt , csk bolt , c sk bolts , csk bolt , 120 c sk bolt , p-clip alt as4525-6 , o ring , o ring , seal , nut , nut , nut hexagonal , nut hexagonal , nut hexagonal , nut hexagonal , nut hexagonal , nut hex self locking , relay , relay-220 , anchor nut , anchor nut , o-ring , rivet blind , round head blind rivet , nas rivet alt nas 1921b-04-02fc , blind rivet c sk head alt nas1921 bo4-03 , nas rivet , blind rivet 100 c sk alt nas 1921b-04s-02fc , blind rivet 100 c sk alt nas 1921b-04s-03fc , blind rivet 100 c sk alt nas 1921b-04s-04fc , blind rivet , blind rivet 100 c sk alt nas 1921b-05s-02fc , rivet blind-general purpose , blind rivet 100 c sk alt nas 1921b-05s-03fc , rivet blind-general purpose , rivet blind-general purpose , rivet blind-100 flush head , rivet blind-100 flush head alt nas 1921m-04s-03 , hose , seal , socket , sockets , c sk rivet , monel cs k head rivet , grommet , ring terminals terminal lugs , timatic bolt , timatic bolt , self aligningdouble row ballbearing , self aligning double row ball beari , self alligning double row ball bear , spherical bearing , spherical bearing

Central Government And Public Sector

CTN :42811108

29 Nov, 2025 NA

Thane - Maharashtra

Tender For supply of socket head cap screw part no. 914.11,hex. socket screw part no. 914.07,bearing cover part no. 360,shaft sleeve part no. 523.2,set of gaskets and o-rings part no. 412

Central Government And Public Sector

CTN :42811354

09 Dec, 2025 NA

Chittorgarh - Rajasthan

Tender For supply of hexagonal socket head cap screw

Air Compressor Screw Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors