Latest air conditioner service Tenders | Government air conditioner service Tenders

CTN :39992516

03 May, 2025 NA

Leh - Jammu And Kashmir

Tender For supply of plant and spares - filter air outer inner , filter fuel w separator , filter oil engine , hyd filter , fuel filter , oil engine filter , hydrolic filter , accelerator cable , txn filter , isolator switch , fan balt , fuel pipe flaxible , bucket tooth , hose , oil filter , air clealer filter , accelrator cable , stoper cable , starting relay 12v , air cleaner , accelerator cable , fan belt , fuel pipe flexible , shim , side cutter bucket , teeth point , hydraulic filter , rock braker chisel , stopper cable , air cleaner filter , thread tape , insulation tape , anabond , m seal , araldite 85gm , bty terminal , disital water , coolant 50 percent , allen key set small

corporations/Associations/Others

CTN :39937026

21 Apr, 2025 NA

Vapi - Gujarat

Tender For supply of chlorine toner for the water supply and sewerage department of vapi municipal corporation annual rate contract 2025-26 - refilling of chlorine gas cylinder, refilling of chlorine gas in cylinder including transportation to and from factory and back, a chlorine cylinders 900 kg, b chlorine cylinders 100 kg, c emergency drum leakage kit-900 kg, c.1 emergency drum leakage kit-100 kg, d chlorine gas metering arrangement, transportation of chlorine gas cylinder with loading, unloading, cylinder transportation should have a licence public liability insurance at 1991, a 100 kg. cylinder, b 900 kg. tonner, supply of chlorine cylinders (empty), providing and supplying chlorine gas cylinder empty of required capacity with necessary explosive certificates including all taxes, a chlorine cylinders 900 kg (tonner), bchlorine cylinders 100 kg, providing and supplying digital chlorine detector monitor meter - 0 to 20 ppm capacity, providing and supplying safety kit for 900 kg cap. toner., providing and supplying safety kit for 100 kg cap. toner., providing and supplying air breathing apparatus as per is:10245 part-il., with 30 minutes duration cylinder, with 45 minutes duration cylinder, servicing of existing panel mounted gaseous chlorination plant., a. gravity feed type., b. pressure feed. type., c. vacuum feed type., d. bleaching dozing type., operation and maintenance (o&m) of the daily chlorination system at the vapi municipal corporations water treatment plant, including the supply of a minimum of three 900 kg chlorine gas with cylinders including all safety with transportation, loading, unloading, with all labours, hydra, tools and spares, tempo, etc complete including the provision of skilled labor with tools and equipments for efficient operation., supply of liquid chlorine for dailychlorination system at the vapi municipal corporations water treatment plant and water work head works at various locations,including the supply of liquid chlorine of 200 litre in drum or sealed container including transportation, loading, unloading, with all labours, hydra, tools and spares, tempo, etcfrom store to site, complete including the provision of skilled labor with tools and equipments for efficient operation.

CTN :39947219

17 Apr, 2025 NA

Ernakulam - Kerala

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - procurenment of spares for repair of air conditions of material organsiation, kochi withreplacing the following items are below

Central Government/Public Sector

CTN :39917634

14 Apr, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : procurement of spares of hrscc 32mtr of dm plant for ntpc gadarwara - sckt,l1471202&2,kavitsu,6kt-12xtl, pipe,l1471202&3,kavitsu,6kt-12xtl, oil cup,l1471202&6,kavitsu,6kt-12xtl, air vent,l1471202&8,kavitsu,6kt-12xtl, ka03&04 ip sft,l14+2&10,kavitsu,6kt12xtl, ka-03 i/p hsg,l147+2&11,kavitsu,6kt12xtl, oil seal,l1471202&12,kavitsu,6kt-12xtl, ext circlip,l147+2&13,kavitsu,6kt12xtl, int circlip,l14+2&15,kavitsu,6kt12xtl, grub screw,l1471202&19,kavitsu,6kt-12xtl, ka03 sun gear,l147+2&21,kavitsu,6kt12xtl, int carrier,l147+2&22,kavitsu,6kt12xtl, ka03 planet,l1471202&23,kavitsu,6kt12xtl, ka0304 int csg,l14+2&24,kavitsu,6kt12xtl, ka-04 pin,l1471202&26,kavitsu,6kt-12xtl, ka04 planet,l1471202&27,kavitsu,6kt12xtl, ka04 sun gear,l147+2&28,kavitsu,6kt12xtl, int carrier,l147+2&29,kavitsu,6kt-12xtl, ka0405 int csg,l14+2&30,kavitsu,6kt12xtl, ka05 op carrer,l14+2&32,kavitsu,6kt12xtl, ka05 sun gear,l147+2&34,kavitsu,6kt12xtl, needle rlr,l1471202&37,kavitsu,6kt12xtl, int circlip,l1471202&40,kavitsu,6kt12xtl, oer key,l1471202&41,kavitsu,6kt-12xtl, oil seal,l1471202&42,kavitsu,6kt-12xtl, ext circlip,l1471202&47,kavitsu,6kt12xtl, plug,l1471202&49,kavitsu,6kt-12xtl, i/p shaft,l1471202&54,kavitsu,6kt-12xtl, ls mtg brkt,kavitsu,6kt-12xtl, adj plate,l1471202&57,kavitsu,6kt-12xtl, fxd rachet,l1471202&58,kavitsu,6kt-12xtl, mvng rachet,l147+&59,kavitsu,6kt-12xtl, lock nut,l147+&60,kavitsu,6kt-12xtl, o/p shaft,l1471202&61,kavitsu,6kt-12xtl, o/p adaptor,l147+&62,kavitsu,6kt-12xtl, allen screw,l147+&66,kavitsu,6kt-12xtl, allen screw,l1471202&a,kavitsu,6kt-12xtl, int circlip-95,l147+&c,kavitsu,6kt-12xtl, oil seal,l147+&d,kavitsu,6kt-12xtl, disc sprg,l1471202&h,kavitsu,6kt-12xtl, pipe,l1471202&j,kavitsu,6kt-12xtl, oil cup,l1471202&m,kavitsu,6kt-12xtl, needle roller,l14+&70,kavitsu,6kt-12xtl, sprng dwl,l1471202&71,kavitsu,6kt-12xtl, int carrier,l147+&77,kavitsu,6kt-12xtl, int casing,l1471202&78,kavitsu,6kt-12xtl, allen screw,l147+&79,kavitsu,6kt-12xtl, needle roller,l147+&81,kavitsu,6kt-12xtl, sprng dwl,l-14-712/02 & 82,kavitsu, pin spacer,l1471202&83,kavitsu,6kt-12xtl, kt-10 pin,l1471202&84,kavitsu,6kt-12xtl, carr sprt,l1471202&85,kavitsu,6kt-12xtl, ring gear,l1471202&86,kavitsu,6kt-12xtl, carer flg,l1471202&87,kavitsu,6kt-12xtl, planet,l1471202&88,kavitsu,6kt-12xtl, sun gear,l1471202&89,kavitsu,6kt-12xtl, int carrier,l1471202&90,kavitsu,6kt12xtl, allen scrw,l1471202&91,kavitsu,6kt-12xtl, resting pc,l1471202&92,kavitsu,6kt-12xtl, int casing,l1471202&93,kavitsu,6kt-12xtl, allen scrw,l1471202&94,kavitsu,6kt-12xtl, ndl roller,l1471202&96,kavitsu,6kt-12xtl, lck piece,l1471202&98,kavitsu,6kt-12xtl, lock rlr,l1471202&99,kavitsu,6kt-12xtl, pin spcr,l1471202&100,kavitsu,6kt-12xtl, planet,l1471202&101,kavitsu,6kt-12xtl, sun gear,l1471202&102,kavitsu,6kt-12xtl, ring gear,l1471202&103,kavitsu,6kt-12xtl, kt-12 pin,l1471202&104,kavitsu,6kt-12xtl, op carrier,l1471202&105,kavitsu,6kt12xtl, carir sprt,l1471202&106,kavitsu,6kt12xtl, carier flg,l1471202&107,kavitsu,6kt12xtl, cage spcr,l1471202&108,kavitsu,6kt-12xtl, allen scrw,l1471202&109,kavitsu,6kt12xtl, allen scrw,l1471202&110,kavitsu,6kt12xtl, int crclp,l1471202&113,kavitsu,6kt12xtl, oil seal,l1471202&115,kavitsu,6kt-12xtl, flg csg,l1471202&117,kavitsu,6kt-12xtl, op spcr,l1471202&119,kavitsu,6kt-12xtl, allen scrw,l1471202&120,kavitsu,6kt12xtl, dowty seal,l1471202&121,kavitsu,6kt12xtl, ext crclp,l1471202&122,kavitsu,6kt-12xtl, plug,l1471202&123,kavitsu,6kt-12xtl, o/p sft,l1471202&124,kavitsu,6kt-12xtl, scrpr pinion,kavitsu,6kt-12xtl, helical hsg,l1471202&1,kavitsu,2kth-220x, helical hsg cvr,kavitsu,2kth-220x, o/p gear,l1471202&3,kavitsu,2kth-220x, idler gear,l1471202&4,k

Central Government/Public Sector

CTN :39937561

14 Apr, 2025 NA

Jhansi - Uttar Pradesh

Tender For e46240091 for supply, installation and commissioning of transformer oil filteration plant and spare - 6000 lph mobile tyre \mounted insulating oil filtration plant as per attached annexures. (supply+ installation & commissioning)., 3000 lph mobile tyre mounted insulating oil transfer pump as per attached annexures. (supply+ installation & commissioning)., regenerative air dryer (without compressor) having capacity of 5 cubic meter/min as per attached annexures. (supply+ installation & commissioning)., mobile tyre mounted insulating oil tank of 30000 ltrs as per attached annexures. (supply+ installation & commissioning)., spares of all items of oil handlingplant (item-1 to item-4) 1) connecting hose with couplings- 01 set of each type and size. 2) complete pump- 01 set of each type and size. 3) complete motor-01 set of each type and size. 4) seal and gasket each type-3 sets5) filter of each type-2 sets 6) electrostatic electrodes-01 set 7) tool & tackle, maintenance equipment for installation repair & maintenance as per attached specification.

State Government

CTN :39587220

24 Apr, 2025 NA

Kheda - Gujarat

Tender For corrigendum : supply of various accessories and spares for cw system for unit 4, 5 & 6 at tmd-ii, stage-ii wtps. - neoprene rubber coated wooden ball dia.80 mm for air realrase valve., neoprene rubber coated wooden ball dia. 65 mm for air release valve., neoprene rubber coated wooden ball dia.100 mm for air release valve., air vent valve neop rubber coated ball 150 dia air relese valve and spare, audco,hawa,leader,bdk make double air vent valve size :100mm, audco,hawa,leader,bdk make double air vent valve size :200mm, shaft couplings, love joy make flexible coupling of c.i. of size:rrl-110 with spacer length 140 mm, lovejoy make jaw-flex coupling with rubber spider, size- l 150, (cast iron), ci love joy coupling size l-095, rubber spider (star bush) for love joy coupling l-150, rubber spider for love joy coupling size l-095, love joy c i flexiblle coupling with pilot bore size l - 110, rubber bar : dia. 40 mm x length 1000 mm, rubber star bushing l110 make : " rathi love joy", coupling bush : id 19 mm x od 33 mm x length 31 mm, brass roundbar size-25mm, brass solid round bar size 50mm, 10 micron box type pre-filter of air handling unit of chiller plant -4,5,6.

State Government

CTN :39539984

21 Apr, 2025 NA

Kheda - Gujarat

Tender For corrigendum : supply of rubber diaphram valve and degasser blower spares for stage-2 (unit - 4,5,6, & 7) at wanakbori tps. - impeller with hub of degasser air blower (model: dmrl, 20, b/ce-20-b) motor hp:-3 hp/1500 rpm, shaft with bearing plummer block of degasser air blower (model: dmrl, 20, b/ce-20-b) motor hp:-3 hp/1500 rpm, pulley (suitable to belt (b-50) 2nos. groove dia215 mm of degasser air blower (model: dmrl, 20, b/ce-20-b) motor hp:-3 hp/1500 rpm, pulley (suitable to belt (b-50) 2nos. groove dia. 100 mm of degasser air blower (model: dmrl, 20, b/ce-20-b) motor hp:-3 hp/1500 rpm, diaphragm valve size 25 nb metal: cast iron., rubber lined diaphragm valve size 40 mm, rubber lined diaphragm valve size 50 mm (2), novel make, metal: cast iron., rubber lined diaphragm valve size 65 mm (2 ), novel make, metal: cast iron., diapharm valve 80mm, rubber lined diaphragm valve size 100 mm (4), novel make, metal: cast iron., rubber lined diaphragm valve size 150 mm (6), novel make, metal: cast iron., 100 percentage neopren rubber diaphragm 25 nb for d.m.plant, 100 percentage neoprene rubber diaphragm 40 nb for d.m.plant, neoprene rubber diapharm 50nb dia, neoprene rubber diaphragm for 65 mm r.l.dia valve, diaphram for 80 nb valve, neoprene 100 percentage pure rubber diaphragm 100 mm, rubber diaphragm for valve 125 mm, neoprene 100 percentage pure rubber diaphragm 150 mm, neoprene rubber lined flap for rubber lined check valve (nrv -flap type) of size: 50 mm, neoprene rubber lined flap for rubber lined check valve (nrv -flap type) of size: 100 mm, neoprene rubber lined flap for rubber lined check valve (nrv -flap type) of size: 150 mm, complete valve assembly for 40 nb gate valve, gate valve of size 50 mm, ccs gate valve class-150 65 nb, cs gate valve 80nb, flanged type, flange to flange 205 mm, p.c.d.-140 mm with 4 no of holes, cs gate valve nb 100 mm, 150 flanged type, flange to flange 229 mm, pcd-190 mm with 8 holes, cs gate valve nb 150 mm, 150 flanged type, flange to flange 267 mm, p.c.d.-241 mm with 8 holes, ci globe valve size 100 nb (4") 150 flang e to flange 292 mm pcd 191, ball type handle valve 15 mm, c.i.ball valve size 1" bsp, class 150, internal thread at both end, 50 nb ball valve, gun metal gate valve size 15 mm (1/2"), is-778, class-i, screwed female end., gun metal gate valve size 20 mm (3/4"), is-778, class-i, screwed female end., gun metal gate valve size 25 mm (1"), is-778, class-i, screwed female end., g.m.globe valve size 32 nb, gun metal wheel valve-40mm, gun metal globe valve nb 50, is -778

corporations/Associations/Others

CTN :39878003

19 Apr, 2025 NA

Parichha - Uttar Pradesh

Tender For supply of spares for de system of chp plant in ptpp, parichha , jhansi. - filter bag (150 mm dia x 3650 mm) long without cage & venturi for de system. specification- pnf (pressure nutsche filter), 550 gsm, antistatic, cage & venturi 140 mmx 3640 mm, m.s. aluminium painted , 10 nos. wire of dia 4mmfor de system, solenoid valve 40 nb, 230v ac, ip-65, class f, 2/2 way diaphragm, aluminium body, media- compressed air, pressure range- .5- 8.5 bar for de system

CTN :39872813

21 Apr, 2025 NA

Mumbai - Maharashtra

Tender For tender for supply of spares of various types of ro plant - strainer support care , impeller , air pressure , spacing pipe , hp motor bearing (nde) , box mounting assembly , pressure spring , connecting rod assembly , neck ring p 45 , sleeve gasket p 37 , neck ring p 45 , mechanical seal p 105 , prefilter pump , ring/circlips , p 931 , seal ring charging screw , seal kit , low pressure gauge- 0-60 bar , high pressure hose module outlet , hp flexible hose , hp pump crank case oil , dolomite , ss jubilee clips 2x (45 mm to 60 mm) , rubber hose from c/f outlet to hp pump inlet , 1 4 fxpu4 elbow , a/v mount for hp pp trolly , high pressure pump for 30 tpd ro plant (cat 3537)

CTN :39854175

15 Apr, 2025 26.97 Lacs

Kota - Rajasthan

Tender For tn-11166 supply of m/s dcips make spares for clinker grinder, jet pump and feed gate for bottom ash hopper and wetting head system for wet ash disposal from esp hoppers unit 5 ash handing plant of kstps, kota. - spares for excen crusher (clinker grinder) as per drg. no. 92-p-07-2b-582 of ahp stage-iii, cam group structure, material-durite, 500 bhn (part no. 1) 1 set = 8 nos., wear plate front (part no. 3) 1 set = 3 nos., wear plate back (part no. 4) 1 set = 3 nos., wear plate side (part no. 5) 1 set = 4 nos. (2 rh & 2 lh), shaft (shaft with shaft structure fitted with cam group structure, shaft sleeve, cam bolt etc.) material en24 part no. 2 - 1 set = 1 no., bearing housing for above clinker grinder (part no. 7), packing gland followers (part no. 12), packing gland (part no. 9) 1 set=2 nos., slinger (part no. 14), lantern ring material al. bronze(part no. 10), shaft sleeve ss410 (part no. 15), special type self locking square head bolt (ss410) with nut & lock nut with washer for segment plates, jet pulsion pump as per drg. no. 92-p-07-2b-591, jet pulsion pump complete assembly (1 no.) assembly consists of body combining tube, nozzle with insert, adapter, aligning ring flange clamp etc. but without tail pipe, spares for jet pulsion pump as per drg. no. 92-p-07-2b-591, combining tube, material -durite 500 bhn (throat cum tail pipe) (part no. 1), nozzle tip (ss-410) with nozzle insert (material ceremic) (part no. 2 & 13), nozzle adapter (part no. 3), flange clamp half , material ductile iron (n-8)(part no. 16), 9 flange clamp half (part no. 18), aligning ring (part no. 10), spares for ba hopper feed gate as per drg. no. 92p07-1b-572, renewable seat strip (part no. 2), side liner (part no. 3), bottom liner (part no. 4), roller (part no. 17), bush for roller (part no. 25), adjustable seating wedge (part no. 13), fly ash intake valve drg. no. 9207-2b-22, fly ash intake valve complete as per drg. no. 9207-2b-22, fly ash intake valve spares parts: -, hopper inlet body spares for faiv (part no. 1) for fly ash intake valve, body intake valve spares for for fly ash intake valve (part no. 2), nuva alloy 8 inch tee for ash intake valve (part no. 3), valve disc spares for for fly ash intake valve (part no. 4), removable seat spares for fly ash intake valve (part no. 5), shaft spares for fly ash intake valve (part no. 6), spring spares for fly ash intake valve (part no. 7), roll pin spares for fly ash intake valve (part no. 8), air cylinder 2.5" borex5" stroke spares for fly ash intake valve (part no. 9), yoke spares for fly ash intake valve (part no. 13), lever spares for fly ash intake valve (part no. 14), lever spares for fly ash intake valve (part no. 15), seal kit for air cylinder 2.5 bore x 5 stroke of fly ash intake valve, air intake valve drg. no. 9207-2a-11, air intake valve complete as per drg. no. 9207-2a-11, air intake valve spares parts: -, body spares for air intake valve (part no. 1), valve disc, ss- 316 spares for air intake valve (part no. 2), compression spring, steel-en 42b spares for air intake valve (part no. 3), valve stem, ss-410/416 spares for air intake valve (part no. 4), totally enclosed rotary slide gate drg. no. 9207-2a-40, totally enclosed rotary slide gate valve complete as per drg. no. 9207-2a-40, totally enclosed rotary slide gate (tersg) spares parts: -, bode spares for totally enclosed rotary slide gate valve (part no. 1), slide spares for totally enclosed rotary slide gate valve (part no. 2), shaft, en-8 spares for totally enclosed rotary slide gate valve (part no. 3), bush, bronze spares for totally enclosed rotary slide gate valve (part no. 4), seal strip, nitrile rubber spares for totally enclosed rotary slide gate valve (part no. 5), air cylinder spares for totally enclosed rotary slide gate valve (part no. 10), wetting unit head assembly spares parts:, body inlet piece, alloy ci spares for wetting unit head assembly (part no. 1), water chamber, fg-220, is-210 spares for wetting unit head a

Air Conditioner Service Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

corporations/Associations/Others