Latest air cooling plant repair Tenders | Government air cooling plant repair Tenders

Central Government And Public Sector

CTN :44804249

21 Apr, 2026 29.63 Lacs

Delhi - Delhi

Tender For for the providing of building materials and execution the work under the work emergency repairs of the structures at the group of monuments, hauz khas, new delhi - material and work, un slacked lime (air tight packing/bass), river coarse sand free from clay, dust, foreign materials, surkhi of 1st class bricks free from clay, dust, foreign materials, belgiri dry, gur/ sheera (air tight packing/bass), gum, san, brick agg. (20 to 25 mm n/s)graded form, brick aggregate (10 to 20mm n/s) graded form, cr stone as per site incharge or site requirement, dq stone as per site incharge or site requirement, brickzira graded form, lakhori brick required size and shape, sun jute, pvc bucket standard size, pvc mug standard size, pvc water tank 500 liters isi marked, pvc pan (tasla), green net, pvc gum boot, pvc pipe 1.5" isi marked, work in progress board with ms angle iron 25x25x5 mm with 1mm ms sheet in both side of writing in hindi & english etc complete, pvc helmet for labour isi marked, safety jacket for labour isi marked, safety belt isi marked, pvc drum 200ltr, tell -tale as per site required, copper dowels (size 6inch), araldite standard epoxy adhesive (resin 1kg + hardener 800g), provision for photo documentation of conservation work before, during & after the execution of work in proper album two set, structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete., providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron y shaped placed 2.4m or 3.00 m apart and with 9 horizontal r.b.t. reinforced barbed wire, stud tied with g.i. staples and g.i. clips to retain horizontal, including necessary bolts or g.i. barbed wire tied to angle iron, all complete as per direction of engineer-in-charge, with reinforced barbed tape(r.b.t.) / spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq. mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of m.s. angle, c.c. blocks shall be paid separately){m}, earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by engineer-in-charge., demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of engineer- in-charge, dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead dismantling old lime plaster, disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of engineer-in-charge., "providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia m.s. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with m.s. tubes, m.s. tube challis, m.s. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety feat

Central Government/Public Sector

CTN :44901629

28 Apr, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of set of s.s. double ferrule for bogie mounted brake cylinder pipe and air suspension pipe as per annexure attached. one set consists of 8 items having 60 nos. in each set. oem/nabl tc & wc required as per irs condition. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44903302

06 May, 2026 NA

Avadi - Tamil Nadu

Tender For supply of one coach set of air spring assembly for train-18 bogies to drg.no.train 18 0014521. each coach set will consists of four air spring assembly. special condition : suitable packing to be done to avoind damage during transit [ warranty period: 30 months after the date of delivery ]

CTN :44882241

21 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot miscellaneousllaneous scrap - lot no.m.nf-37.exmp.e.04.2026-27.03 description- scrap iron frame with nf attachments (our offer) scrap star-delta starter, hscf pump, h.s pump, b.s. pump, welding machine, fire extinguisher, brake cylinder, transformer, air pressure gauge, lamp charger, stabiliser, battery charger, water cooler, oil cooler, plug, cutting parts pole shoes, ocb and other miscellaneous nf-37 items as in the lot in two places at "e" sector. may be in intact or dismantle condition. before bidding, bidders are requested to inspect the lot. loading will be done by purchaser's own arrangement.

CTN :44882287

21 Apr, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.ws/ayma/04/04/26-27/bg/cond./4w/8w/wgn. description- iron and steel scrap cutup parts of bg cond.4w/8w/wgn. without contents if any. 1) se 75079316598 bobsnm1 (nlb) 2) special repair 30069060806 bcnm1 (nlb) 3) er 72029562463 bobrnm1 (nlb) 4) er 72029564177 bobrnm1 (nlb) 5) nr 85039647471 bvzc 6) se 85079704141 bvzc 7) cr 85019660094 bvzc nb: (1): i) wagons are to be sold without 08 nos. nlb trolleys against special repairl. no. 01 to 04. ii) wagon serial no. 01 to 04 to be sold without 16 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower etc and other excluded fitting as per latest excluded fitting list. * iii) wagon serial no. 05 to 07 to be sold without 06 nos. r/b wheel sets, axle box cover plate, bg spring and brake gear with lever pull rod etc . as per latest fitting list. **( it contains no trolley ) *excluded fittings list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) delivery will be given in numbers.

Central Government/Public Sector

CTN :44882335

22 Apr, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - pl.no.98030309.ferrous scrap consisting of condemned and unserviceable fabricated/loose angles/channels/plates/ sheets/ frames/chequred plates, blower covers/housings, racks,grill gates,rolling shutters and its parts, trays, fabricated stands and fencings, ms/ gi pipes and tanks of sorts and sizes,fabricated pipe posts , tables, weldmesh frames, radiator fan housings, control panel frame cutups parts, dust bins, control boxes ,battery boxes in full or broken condition,vrla cell trays , traction motor cover plates, ms sheet doors with frames , hand manual doors,rectifier covers, radiator frames,radiator end covers, alco pipes,sump doors, brackets of transformers ,push rods ,blower leaf , control panels, berth iron frames, sump covers,lube oil filters, loco cutup parts, driver seats,traction motor covers, ms/gi sheets, oil cooler covers,test panels,cabin side wall cut pieces, ,window frames,lube oil and water line pipes,lube oil cooler top covers ,water expansion tanks ,manifold covers,cattle guards, sand boxes ,alco loco driver chair frames, wagon doors,gutters,cabin doors, battery box tray, loco motive pipes,battery box doors,manifold stands , fabricated wheel stands,tressels, air moist,mr tanks, radiator packing angles,rods,steam loco cut parts, , carriege doors,old platform, bearing cleaning plant,after cooler casings,lube oil cooler casings, nmg doors,side hood plates,sliding doors,air duct assembly, fuel oil headers,loco head light covers and other similar items heavy cutup in nature with or without original attachments note: [1] cutting is permitted. [2] purchaser should arrange three pipe gas cutting torch with jointless safety hoses attached with back arrest and advised to follow the all safety aspects as per rule in force. [3] non ferrous items if any should be removed and returned to railways. [4] crane loading is permitted.

corporations/Associations/Others

CTN :44877526

23 Apr, 2026 NA

Bengaluru - Karnataka

Tender For corrigendum : auction sale of scrap lot consisting of empty plastic barrels 210 ltrs,scrap lot consisting of scrapped spring blades,scrap auto grade-1: consisting of m.s. gear scrap items,scrap lot consisting of power steering loose items,scrap lot consisting of compressor wheel,scrap 295x80 radial tyres,scrap lot of radial tyre 9x20,scrap lot consisting of tata & leyland piston with pin,scrap lot of radial tubeless tyre,scrap lot consisting of piston,scrap lot of radial tyre 1000x20 lot no.83 (a18-lot),scrap lot of radial tyre 1000x20,scrap lot consisting of radial tyre 1000x20,scrap lot of radial tyre 10x20 lot no. 86,scrap lot of radial tubeless tyres 235/75,scrap lot consisting of electrical items,scrap lot consisting of wiper motor,scrap fly wheel rings only,scrap gi sheet,scrap lot consisting of armature small,scrap lot consisting of office old records including file covers,scrap lot of nylon tyre 8.25x20,scrap lot consisting of empty plastic barrels- cut/ dented/ damaged,scrap lot consisting of engine bell housing,scrap lot consisting of power steering pump,scrap lot consisting of air drier cartridge,scrap domestic vehicles tyres odd size,scrap lot consisting of ply wood & densified wooden floor pieces attached,scrap lot consisting of air tank all size,scrap lot consisting of brake pad,scrap lot consisting of domestic vehicle tyre,scrap lot consisting of tata water pump,scrap lot consisting of all type exhaust manifold,scrap lot consisting of tata & leyland main and connecting bearing,scrap lot of assorted lot consisting of passenger seat, foam etc,scrap led boards all size, as is where is condition,scrap lot consisting of marcopolo air drier all sizes,scrap lot consisting of nozzels,scrap lot consisting of 40 ah tubular batteries,scrap lot consisting of 12v 180 ah batteries (egr vehicles),scrap mixed lot consisting of aluminum sheets etc,scrap air bellows w/wo pistons,scrap all types lights like tube lights, etc,scrap ms dented damaged, burnt, rusted cut barrels

Central Government/Public Sector

CTN :44873395

28 Apr, 2026 NA

Chennai - Tamil Nadu

Tender For corrigendum : supply of one coach set of end part for air conditioned emu trailer coaches to drg. nos. emu/c/ac-1-1-002, col-iii, alt 'd' -1 no, emu/c/ac-1-1-003, col-i, alt 'c' -1 no. special condition : special condition: i) the manufacturing facility requirement as per icf/md/spec-147,issue status-01,rev-02, amendment no.02. ii) body bolster to drg.no.icf/mrvc/c/ss-1-1-005,alt 'h', col.i to be provided without a)side bearers to drg.no.emu/m-1-1-027,alt 'z' col-ii.b)grubscrews to drg.no.icf/mrvc/c/ss-1-1-005, alt 'h' item-8, and c)side bearer covers to drg.no.emu/m-1-1-027, alt 'z' item-1. iii)the under frame end part should be supplied with normal side up and side bearer side down. details for satge inspection. (a) raw material stage # ensure the raw material used using portable spectrometer (b) jig stage # assembly of sole barwith cross members. # assembly of body bolster arrangement. # welding of ribs with sole bar. #placing & welding of top sheet arrangement. # dimensional & visual checks. # punching of serial no & ensuring proper traceability. (c) surface preparation and painting stage. # short/sand blast to the requirements. # painting process as per the specification. # final product inspection. note: applicationof aluminium welding coat to rcf spec mdts-28272 latest revision on top surface of cross members shall be ensured before welding the trough floor with cross members to avoid bi-metallic corrosion. suitable packing to be done to prevent damage during transit, unloading and rust prevention during storage. [safety item ]

Central Government/Public Sector

CTN :44867801

22 Apr, 2026 NA

Multi City - Karnataka

Tender For corrigendum : auction sale of depot ferrous scrap - 98412103]scrap/ cond /released /unserviceable ss air filters such as fresh air filter and return air filters with or without ms mesh attachments on as is where is condition available under the custody of cdms 08ward ap (loc: bin no. 143a at scrap yard)