Latest air gun Tenders | Government air gun Tenders

CTN :38966146

06 Feb, 2025 NA

Srinagar - Jammu And Kashmir

Tender For supply of fog light assy m and m scorpio,water pump fan belt,fuel filter cum water saparator,oil filter cartridge,baby filter,self stator 24v,gear box overhauling of 2.5 ton tata,transfer case overhauling,denting and painting of maruti gypsy includng complete body inner side roof repairing and floor matting,repairing of fuel injecton pump 2.5 ton tata

CTN :38954402

29 Jan, 2025 NA

Pune - Maharashtra

Tender For supply of case for cartridge 38 mm rubber bullet to drg. no. kf/sk-1746 sheet no. 2 dt. 20-09-19, specn. no. d

CTN :38917495

01 Feb, 2025 12.00 Lacs

Jind - Haryana

Tender For purchase of various apparatus/instruments required for department of chemistry, chaudhary ranbir singh university, jind - stirrer the stirrer should be made up of ceramic coated aluminium alloy top with digital speed and temperature control. the stirring speed should be 50-1500 rpm or better. the stirrer should be operational up to a temperature range of 300oc with an accuracy of 1.0oc and ip 42 protection class. the input power should be 600 w or above. the stirrer should be supplied with hemispheric bowl (100 ml= 1 no; 250 ml= 1 no) to replace oil baths and mantles in order to perform clean and safe analysis with round bottom flasks., electronic balance the electronic balance should have a maximum weighing capacity of 200 g or more with a resolution and repeatability of 0.1 mg, and a response time of 5 sec or better. the system should have automatic internal calibration with touch screen display. the system should have internal database capacity of 2500 or more with multiuser password protection feature. , vacuum pumpthe pump should be operational at a maximum power of 65 w or more with a max. vaccum of 99 mbar or more. the pump should be fitted with vacuum and filter cartridge., hot air oventhe inner chamber should be made of stainless steel and the outer chamber should be m.s powder coated. the maximum capacity of the oven should be 100 ml or more. the operational temperature should be between ambient to 250 oc or more with a temperature accuracy of 1o c. pid based digital temperature control., double distillation unitthe unit should be pyrogen free with a distillation water output capacity of 1.5 l/h. the minimum cooling water requirement should be 1lt/min. auto-power cut facility in case of halted supply of water., circulating oil baththe oil bath should be made up of stainless steel with 4 digit 7 segment led display for temperature and time. the bath should have s.s perforated tray for holding flasks. the bath should have a capacity to accommodate flask of 1l. the working temperature range should be +5 to 240 oc (0.1 oc increment) with a temperature stability of 1oc., water baththe water bath should have a capacity of 20 l within built water level sensor. the bath should be made up of stainless steel and supplied with 8 concentric rings. the bath should have digital temperature control with pt100 sensor. the system should have stirring capability with ptfe magnetic bars. , ph conductivity meter operational between a ph range of -2 to 16.00 with a resolution of 0.01 ph and an accuracy of 0.02 ph. 5 points calibration. the ec range should be in between 0.00 to 29.99 s/cm, uv cabinet operational at two uv wavelengths (254 and 365 nm). the cabinet should also be equipped with one visible light. the external body should be coated with ms powder/epoxy., flame photometerapplication: the flame photometer is used for qualitative and quantitative determination of several cations, especially for metals that are easily excited to higher energy levels at flametemperature. these metals include na+, k+, ca2+, ba2+ and li2+.specification requirementmeasuring range na+: 0 to 99.9 ppm k+:0 to 99.9 ppm ca2+ :0-99.9 ppmli2+: 0 to 99.99 ppmsensitivity na+= 0.1 ppmk+ = 0.1 ppmspecificity less than 0.5% interference when concentrations are equal to test sample concentrationsgas control-adjustable with knobsignition system-auto ignition systemflame failure-auto detectiongas cut off-automaticreproducibility-less than 1% coefficient of variation for 20 consecutive samplesusing 10 ppm na set as maximum standardlinearity-less than 1%display led, 12.5 mm (1/2")fuel supply-high-grade propane/butane mixture regulated at approximately30 psiair supply-6 l/min at 12 psi; oil and moisture freerecorder-output 0.05 to 5 v (switchable)operating manuals, service manuals, other manuals should provide user, technical and maintenance manuals in english language list of equipment and procedures required for local calibration and routine maintenance service and

CTN :38695408

18 Jan, 2025 NA

Bharatpur - Rajasthan

Tender For corrigendum : modernization of veh section - elgi air compressor , pneumatic pipe line , pneumatic pipe line 0.5 inch , pneumatic air gun , pneumatic gun socket , pneumatic air valve , qrc plug, male , qrc socket female , deflection valve , air house pipe , air check pipe

Central Government/Public Sector

CTN :38936883

04 Feb, 2025 NA

Multi City - Multi State

Tender For supply of pneumatic air blow gun (metalic body) with spiral air hose pipe of 10 mtr.length, clour-blue/yellow with quick coupling, both side socket & fitting. air gun & hose pipe should be tested at a pressure of 12 kg/cm square.

State Government

CTN :38881966

30 Jan, 2025 1.06 Lacs

Korba - Chhattisgarh

Tender For supply of spares for communication system/ telephone exchange installed at 2x250mw dspm tps, korba east. - line cord modular type modular both end preferred make beetel , modular reciver cord for telephone , roset box , 10 pair jelly armoured telephone cable , hot air gun temp. range up

CTN :38903939

03 Feb, 2025 NA

Hyderabad-T - Telangana

Tender For supply of festo make guard covers for dgsl cylinders model no dads ab g6 25 200 , festo make double acting pneumatic cylinder model number dsbc 80 250 ppv a n3 , festo make double acting pneumatic cylinder model dsbc 125 250 ppv a n3 part no1804964 , festo make self aligning rod coupler with hexagon nut part no 6143 , festo make set of wearing parts for linear drive model no dgc 32 , festo make foot mounting model no hpc 32 , festo make dhps 25 a pneumatic cylinder , festo make foot mounting type hbn12 , festo make proportional pressure regulator for output pressure range of 0 to 6 bar , festo make double acting pneumatic cylinder stroke 50mm , festo make double acting pneumatic cylinder stroke 40mm part no 536265 , festo make pressure regulator part no 159501 , festo make pressure regulator part no159502 , festo make precision pressure gauge part no 161127 , festo make precision pressure gauge part no 161128 , festo make pilot non return valve model no hgl , festo make pneumatic spares 3568 , festo make blanking plug part no 3569 , festo make blanking plug part no 3571 , festo make pneumatic spares 3572 , festo make air service unit part no 159604 , festo make air gun part no 35528 , festo make mini slide model no dgsl 25 200 y3a , festo make mini slide part no dgsl 25 150 y3a , festo make linear drive model no dgc 25 250 kf ysrw a , festo make linear drive model no dgc 32 300 kf ysrw a , festo make set of wearing parts for linear drive model no dgc 25 , festo make foot mounting for linear drive model no hpc 25 , festo make round pneumatic cylinder model dsnu 16 100 p a , festo make sensor fastening unit for round cylinder model smbr 8 16 , festo make pneumatic spares and plug with sealing ring , festo make frl service unit part no frc , festo make filter regulator lubricator service unit frc , festo make filter regulator lubricator service unit frc , festo make filter regulator lubricator service unit model frc

Central Government/Public Sector

CTN :38850215

29 Jan, 2025 NA

Goa - Goa

Tender For supply of consumable items for electrical measurement lab - sq mm copper wire, line tester, screwdriver set, combination plier, wire stripper, insulation tape, incandescent lamp, 1.5sq mm wire copper crimping insulated ring terminal, inner dia 5mm, banana connector btp4 in red and black colour, soldering iron set (25 watt) with soldering wire, flux and stand, vero board (3*4 mch), 9v hw high-quality battery-, opto-coupler (4n35-10 nos. & pc817-10 ???.), led 5mm (colour-r-y-b-g-w), jumper wire, single strand bread board wire, 25awg, withstand current rating upto 1 amp., bread board, 400 points, mq135 sensor, buzzer, 5 volt, dc motor 5 volt, 15 watt carbon resistor (1k2, 10??, 3300, 4702), polarized capacitor 10f, 25volt & 1f, 25 volt, straight batten holder for bulb, ferrous chloride for pcb etching (50gm box), glossy a4 130 gsm paper, my2n-relay with socket, ssr- (input-3 to 32 volt dc & output -24 to 380 volt ac), ssr (input-3 to 32 volt. dc & output-5 to 220 volt dc, 10amp), aa battery, alkaline, 1.5 volt, electric iron 1200 watt, diode 1n4007, iwatt, 15mm shaft potentiometer, 10k12, 3pin, 20% tolerance, op-amp, lm741ic, voltage regulator (7812, 7805, 7809, & 7912, 7905, 7909), character lcd display (16*2) with yellow backlight, arduino uno(smd version)14digital pin, 6 pwm pin, analog input pin-6, microcontroller atmega328p, clock speed 16mhz, b type usb,, temperature & humidity sensor, gy 65 sensor, water flow sensor, working range -1 to 30l/min, capacitive proximity sensor, photoelectric proximity sensor, ultrasonic proximity sensor, inductive proximity sensor, lm393, copper wire 2.5 sq mm, 16amp, ss double combined, current-20max, wattage up to 2000 to 2500 watt, operating voltage-240volt, fr material, polycarbonate fr plastic. suitable for both 20amp & 10amp plug, point 16 amp. 3pin top plug, anchor, accelerometer sensor (adxl335), soil moisture sensor with digital output-soil hygrometer-soil humidity sensor-soil moisture meter, tweezers, pt1000-s water proof temperature sensor, multi strand flexible hookup wire, la-25-p lem current sensor, ic base 8pin, heat shrink sleeve set (4mm), hot air gun

CTN :38802145

23 Jan, 2025 NA

South Andaman - Andaman And Nicobar Islands

Tender For supply of aluminium step ladder , mop handle and pads , brush stiff tools , paint roller , grease gun , spray painting machine , grinder , angle grinder , wire brush 70 mm , wire brush 100 mm , exhaust fan , ladder , vaccum cleaner , goggles , drilling machine , impact wrench , screw driver machine , hp water jet machine , rivet pop gun , chipping hammer kit , straight grinder , gasket cutting machine , dust protector , ear plugs , power bit set , shear , hot air gun , inclinometer , torch

CTN :38783750

22 Jan, 2025 NA

Pune - Maharashtra

Tender For tender for supply of ste mode on hvf - lv1 r72 4730720103936 adopter union drg no 155-28-682sb , lv1 r72 7240720249010 attachment for funnel 175-91-075sb , lv1 r72 5365720138823 plug 33x1.5 drg no 60-17-254 , lv1 r72 4730430003263 clip drg no 175-34-073sb , lv1 r72 5340720326830 plug drg no 155-19-111 , lv1 r72 3040610037835 upright right hand 175-40-013sb-1 , lv1 r72 2540008607 case for bulbs drg no 172-91-226sb , c2 r72 172-94-086 bush , z1 r72 155-33-288 gasket , lv1 r72 5306720417098 bolt m10x60mm long 5306000836 , n1 r72 5315-004003 pin 54-31-951 , n1 r72 2540-009245 body cell lifting mech 172-28-035-1a , n1 r72 1015-002913 installation of system 2a46 172-20sb-6sb , z6 r72 misc-emt-81-013 spring , n1 r72 5315-053103 key 14x9x36 elevation mech , z6 r72 misc-emt-81-019-2 adjusting washer , lv1 r72 5330720123747 gasket drg no 172-33-646-02 , n1 r72 1015-004276 frame cartridge base disposal mech , z6 r72 5995-72-008-9723 wiring harness 175-70-059sb1

Air Gun Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector