Latest air reservoir Tenders | Government air reservoir Tenders

Corporations And Associations And Others

CTN :43499288

15 Jan, 2026 2.98 Lacs

Delhi - Delhi

Tender For supply of machinery/tools for various parks at sarita vihar in ward no. 187, central zone - brush cutterengine: single cylinder, 2 stroke, aircooled onlyengine displacement: 40.2ccpower output: 2kw/2.7hpmax output shaft speed at cutting attachment: should be minimum 9000 rpmcarburetor: diaphragm with compensator technology.fuel tank capacity: minimum 600 ml.weight( dry,without cutting attachment & deflector): should not be more than 7.5 kgclutch: centrifugal type, clutch shoe support base & lining metal only.multi function handle: should have acceleration ,on/off switch at right handle.brushcutter harness: should be double shoulder harness only.anti vibration system: must have 4- point aniti vibration system.vibration level in m/s2 at right handle : should not be more than 2.5 m/s2sound pressure level db(a): should not be more than 105 db(a)drive shaft design: must have drive shaft ends square design type only.certification : must have valid en certificaton, petrol operated chain sawengine : single cylinder, 2 stroke, aircooled onlydisplacement: 45.4ccpower output : 2.3kw. 3.0 hp max.engine speed (with guide bar & chain ): at least 12500 rpmcarburetor: diaphragm type & compensator technology.fuel tank capacity: should be minimum 450 ml.dry weight( without cutting attachment ): should not be more than 5.0 kgclutch: clutch shoe linining metal only.guide bar design: should be rollomatic type.guide bar length: guide bar length must have 50 cm/20" inch. guide bar and chain: should have same manufacture only.chain type: every drive link require groove & small oil receiver hole for better lubrication. 0.325 inch pitch & 1.6 mm thickness only.chain lubrication system: fully automatic ,speed controlled rotary oil pumpchain oil tank capacity: should be minimum 200 ml.oil pump drive: should have direct drive from crankshaft & oil pump flow adjustable.master lever control: must have all operation in one hand, chock,throttle, acceleration,switch off.guaranteed sound power level: should not be more than115 db(a)maximum chain velocity to iso 11681: should be minimum 28 m/scertification: product should have valid dplf certificate with test standard en iso 11681., tree prunersupply of telescopic pole pruner:-specification:- pole length incuding blade: 6.5m blade material: hardened & tempered high carbon steel .the head of the blade shall have a hooked tip useful for cutting twigs saw blade shape: hooked type curved saw blade type & no of cutting teeth :tripple grounded 86 teeth blade length : 15"-16" pole type: light weight telescopic tubular aluminium alloy extendable pole no of positions for pole height adjustment : 10 positions locking mechanism : ergonomicvally designed two way locking mechanism total working length : max 219"(6623 mm), min 103" (3103mm) branch cutting capacity: 200mm max, lawn mowersupply of lawn mower:-specification:- type of machine walk behind lawn mowerspower source petrol enginestart type recoil / pull startspeed control variable speeddrive type all wheel driveblade style rotary typeblade engagement electromagneticcut width (mm) 500 to 524minimum cut height 1 millimetermaximum cut height 26 millimeterblades metallicnumber of blades 1number of positions for cut - height adjustment 2number of levers for cut - height adjustment single levernumber of wheels 4front wheel size 200 millimeterrear wheel size 200 millimeterwheel tyres pneumaticif yes, grass catcher / collector / bag volume 88 liter"engine power rating (watt)" 4000 to 4999engine fuel tank capacity - 1 ltr., lopperanvil tree branch lopper lade material - high carbon steel with hard surface treatment, overall length - not less than 914 mm handle material - similar materil as per requirement, weight - 1.5 kg., cutting dia - not less than 38mm

Corporations And Associations And Others

CTN :43499290

15 Jan, 2026 1.49 Lacs

Delhi - Delhi

Tender For supply of machinery/tools for various parks at pul pehladpur ward no. 179 in central zone - brush cutterengine: single cylinder, 2 stroke, aircooled onlyengine displacement: 40.2ccpower output: 2kw/2.7hp max output shaft speed at cutting attachment: should be minimum 9000 rpmcarburetor: diaphragm with compensator technology.fuel tank capacity: minimum 600 ml. weight( dry,without cutting attachment & deflector): should not be more than 7.5 kgclutch: centrifugal type, clutch shoe support base & lining metal only. multi function handle: should have acceleration ,on/off switch at right handle. brushcutter harness: should be double shoulder harness only. anti vibration system: must have 4- point aniti vibration system. vibration level in m/s2 at right handle : should not be more than 2.5 m/s2 sound pressure level db(a): should not be more than 105 db(a) drive shaft design: must have drive shaft ends square design type only. certification : must have valid en certificaton, petrol operated pole prunnerengine : single cylinder, 2 stroke, air cooled onlydisplacement: should be between 25-30 cc power output : should be minimum 1.2 hpweight (dry without cutting attachment & fuel ): should not be more than 7.5 kgfuel tank capacity (ml): should be minimum 400mlchain oil capcity (ml): must have minimum 200 ml.clutch : clutch shoe linining should be metal only.guide bar length : minimum 30cm guide bar and chain : should have same manufacture only .chain type : every drive link need groove & small oil holes for better lubrication. saw chain pitch should be 1/4" or 3/8picco only and drive link thickness must have 1.1 mm or 1,3 mm.max.output shaft speed (rpm): should be minimum 8000 rpm at chain sprocket.equipment total length with guide bar and chain ( cm ) : should be mimimum 220 cm - compressed & total length of equipment - minimum 350 cm - extended. sound pressure level (db/a): should not be more than 95 db(a)vibration measurement m/s2 at control handle - extended poistion : should not be more than 5.5 m/s2certification : must have tuv certification with test standard en iso 11680., hedge trimmerengine: 2- stroke - single cylinder air cooled.engine displacement: should be between 20-25 ccpower output: should be minimunm 1 hpfuel tank capacity: minimum 400 mlweight: should not be more than 6.0 kgclutch: clutch linning should be metal only.handle: must have rotating multi-function handleanti vibration system: must have spring loaded technology for anti vibration system design: should have double sided blade with tooth spacing minimum 35mm bar length: minimum 600 mmblade: should have chrome plated -anti corrsion. stroke rate ( l/min): minimum 3000 vibration level m/s2 at right handle: should not be more than 3.5 m/s2.sound pressure level (db..(a)): should not be more than 95certification: should have tuv with en iso 10517:2009, lopperanvil tree branch lopper lade material - high carbon steel with hard surface treatment, overall length - not less than 914 mm handle material - similar materil as per requirement, weight - 1.5 kg., cutting dia - not less than 38mm

CTN :43519489

19 Jan, 2026 NA

Uttara Kannada - Karnataka

Tender For repair and refurbishment of sewage tank high level sensor

CTN :43548093

22 Jan, 2026 NA

Amritsar - Punjab

Tender For supply of ordinary portland cement 43 grade , fine aggregate sand of best quality , well burnt common building bricks of sub class b of size 23 x 11. 5x 7. 5 cm , nonskid ceramic colored tiles of 400x400x 7 to 8 mm thick first quality heavy duty abrasion resistant , wpc , white cement , cement based paint external wall , soap dish chromium plated , pvc rotational molded high density polyethylene hdpe triple layer water storage tank cylindrical vertical tank 1000 ltrs capacity , sintex 500 ltr , door 6 feet x3feet , ventilator , gi socket 15mm , gi elbow 15mm , gi tee 15mm , gi union 15mm , 15mm bore dia brass bib cock weight not less than 330gm , gi pipe 15mm dia , gi nipple 15mm 3 inch long , gi plug 15mm , 15mm dia pvc connection pipe 45cm long , gi socket reducer 20-15mm , gi pipe 20mm dia med grade , gi socket 20mm , gi elbow 20mm , gi tee 20mm , gi union 20mm , 20mm chrome plated stop cock , 15mm chrome plated stop cock , gi nipple 20mm 3 inch long , 20mm dia pvc float valve , 15mm bore cp hot and cold water mixture , 15mm bore cp bib tap long body , 20mm dia check nut for pvc water tank , vitreous china ewc with s trap with low level flushing cistern of pvc with capacity 10 ltrs with flushing pipe to match the ewc incl jet spray and all fixings and fixture , 75mm pvc cowl , 75mm dia pvc pipe , 75mm bore dia pvc bend , 75mm bore dia pvc socket , 75mm bore dia pvc tee , 100mm bore dia pvc socket , 100mm bore dia pvc tee , 100mm bore dia pvc elbow , 100mm bore dia pvc pipe , pvc clamp for 75 mm dia , pvc clamp for 100 mm dia , vitreous china wash hand basin whb of size 550mm x 400mm including waste disposal pipe comma cp grating with washer , cp shower rose 100 mm square shape with arm 200 mm long with all connected accessories , batten holder , led bulk head fitting 8 watt , pvc square block , pvc ceiling rose , gang box 4 way in one , switch p oblique t 5 oblique 6 amps one way switch , pvc cable insulated and pvc sheathed 2. 5 sq mm single core with aluminum conductor suitable up to 1100v , pvc cable insulated and pvc sheathed 1. 5 sq mm single core red oblique black with aluminum conductor suitable up to 1100v , pvc cable insulated 10 sqmm , flexible wire pvc insulated twin core twisted of size 23 oblique 0. 076 with copper conductor , pvc insulation tape19 mm width 5 mtr long in black colour , pvc casing capping 25mmx16mm comma medium grade snow white , switch socket combination 3 pin 16 amps with gang box for gyser point , screws 1 oblique 2 inch full threaded 100 nos pkt , screws 1 inch full threaded 100 nos pkt , exhaust fan 250mm sweep , electric geyser double insulated foam inside 25 ltrs capacity , mcb sp 32 amps 240 v , mcb distrubution box spn 4 way metal double door , cgi sheet , mirror led light 9 watt

CTN :43521576

19 Jan, 2026 NA

Baramulla - Jammu And Kashmir

Tender For supply of pre-fabricated steel tubular ffl 2 oblic 1 structure of size 2.40 x 2.40m , quick setting compound rapidite make acclerex cico fosroc , aggregate 20mm. stone aggregate to be crushed rock or gravel 20mm graded , aggregate 40mm. stone aggregate to be crushed rock or gravel 40mm graded , manufactured sand m sand confirming to is 383 2016 specifications for coarse and fine aggregates. , bricks cement pcc brick of size 230mm x 115mm x 75 mm with sharp corners , non skid ceramic tiles coloured 7 to 8 mm thick in floors , liquid water proofing compound is 2645 2003 , white cement packet 01 kg , pvc ceiling rose 2 obliq 3 terminal with pvc square box complete with screws , led tube light fitting 1 x 12 w 2 feet long complete with all accessories including led tube rod , pvc cable insulated and pvc sheathed 1.50 sq mm twin core with copper conductor , flexible wire pvc insulated twin core twisted of size 23 obliq 0.0076 with copper conductor , modular switch one way 6 amp 1 module , white cover plate with frame 2 module , white cover plate with frame 3 module , metal flush box 2 module , metal flush box 3 module , mcb double pole 230v ac 50 hz 16 amps 10ka confirming to is 8828 1996 , mcb distribution board in sheet metal enclosure two ways with blanks conforming to is 8828 1978 , ms screw 20 mm full threaded per pkt 100 nos conforming to is 723 1972 , tape insulation 2 cm width 10 mtr long isi marked , pvc casing caping 25 mm x 16mm , pvc casing caping square box 4 inch x 4 inch , pvc body exhaust fan 250mm sweep with lowers , vitreous china squatting pan orissa pattern size 580 x 440 mm white with integral foot rests , pvc valve less syphonic action type low level flushing cistern 10 ltrs capacity , 110mm dia upvc pipe 3 mtr long single socketed with cowl , 110mm dia upvc single tee , 110 x 110mm nahani trap with jali , 4 inch dia upvc bend , 15mm brass stop cock conforming to is-8934 1978 , 3 layer of pp r polypropylene random copolymer pipes sdr 7.4 , 20mm elbow suitable for 20mm dia ppr pipe conforming to is 1239 1989 , 20mm socket suitable for 20mm dia ppr pipes conforming to is 1239 1989 , 20mm equal tee suitable for 20mm dia ppr pipe conforming to is 1239 1989 , 20mm union suitable for 20mm ppr pipes conforming to is 12391989 , ppr end plug 20mm conforming to is 1239 1989 , ppr pipe clamp suitable for 20mm piping , bib cock 20 mm with flange conforming to is 8931 1978 , gi reducer socket 15 obliq 20mm , gi reducer elbow 15 obliq 20mm , pre fabricated man hole cover 6 feet x 4 feet made of isa 40x40x6mm frame , rotational moulded polyethylene water storage tank double layer , ppr tank connector 20mm with check nut and washer , white lead safeda , thread cotton ball 100 m long , vitreous china wash hand basin whb white flat back size 550x400 mm , 20mm dia pillar taps of ptmt of any colour high pressure screwed for iron pipe , 110mm dia upvc swr pipe single socketed pipe type a in any length with rubber joint , 600x450mm size looking mirror mounted on pvc with pvc shelf assembly including all fittings all as specified

Central Government/Public Sector

CTN :43535029

06 Mar, 2026 NA

Delhi - Delhi

Tender For supply of drain valve for air reservoir as per kbi part no. i73781 for vande bharat express [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :43528263

16 Jan, 2026 NA

Jabalpur - Madhya Pradesh

Tender For auction sale of reduction gear,belt ammunition m3,carrier air reservoir,bush steel adjustment of loose brl,power take off device,safety valve,ramp backsight,sear safety assy,handle cocking assy

CTN :43480596

15 Jan, 2026 4.14 Lacs

Chandigarh - Chandigarh

Tender For roof treatment and outer apex of house no. 3753 to 3758. 3759 to 3764, 3765 to 3770, 3771 to 3778 (single storey) (type 11 ja) sector 22 chandigarh (26 nos. houses) (ibm scheme no. w4/2024/23944) - brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstucture above plinth level up to floor v level in all shapes and sizes in. dsr 6.4., cement mortar 1:4 (1 cement : 4 coarse sand) dsr 6.4.1, 12 mm cement plaster finished with a floating coat of neat cement of mix : dsr 13.7, 1:4 (1 cement: 4 fine sand) dsr 13.7.1, demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. dsr 15.2, 1:3:6 or richer mix dsr 15.2.1, disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. dsr 15.60, providing and fixing g.i. pipes complete with g.i. fittings and clamps, i/c cutting and making good the walls etc.: dsr 18.10, 20 mm dia. nominal bore dsr 18.10.2, providing and fixing gun metal gate valve with c.i. wheel of approved quality (screwed end) dsr 18.17, 20 mm dia nominal bore dsr 18.17.1a, providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete : dsr 18.18, 20 mm nominal bore dsr 18.18.2, providing and fixing g.i. union in g.i. pipe including cutting and threading the pipe and making long screws etc. complete (new work) dsr 18.46, 20 mm nominal bore dsr 18.46.2, providing and placing on terrace (at all floor levels) polyethylene water storage tank isi : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank dsr 18.48, disconnecting damaged overhead/ terrace pvc water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of engineer - in - charge. dsr 14.79, providing and fixing of tank nipple, 20mm

CTN :43500624

22 Jan, 2026 NA

Ranchi - Jharkhand

Tender For supply of outdoor type , plinth mounted, distribution transformer, minimum energy efficiency level 3 of rating 250 kva, 3-phase, 11kv/415-240v,50hz, oil immersed, non sealed type (transformer tank body and cover are bolted), copper wound, primary winding in delta and secondary winding in star (vector symbol- dyn11), onan cooled transformer, conforming to is 1180 (part1):2014 with amendment nos. 1,2,3,4 or latest, and supplied with all standard fittings mentioned in clause 20.1 of is 1180 (part 1) latest with condition that drain-cum-sampling valve. oil temperature indicator & winding temperature indicators will be provided as per clause 20.2 f) of is 1180 (part 1). terminal arrangement: the transformers shall be fitted on high voltage and low voltage sides bushing appropriate voltage and current ratings., low voltage side cable end box required . the high voltage bushings (3 nos.) shall conform to is/ iec 60137. the low voltage bushings (4 nos.) shall conform to is 7421. off-circuit tap changer (applicable for all ratings above 200 kva) for variation of hv voltage from +5% to -10% in steps of 2.5%. following has to be submitted by supplier along with supply of material: (i) type test report of transformer having same rating, make (& model if any) and design from nabl accredited lab as per is: 1180 (part 1) latest. (ii) routine test certificates as per is: 1180 (part 1) latest. (iii) special test certificates as per clause 21.4 sl. no. (a), (c), (d) & (e) of is:1180 (part 1) latest.