Latest air supply equipment Tenders | Government air supply equipment Tenders

Central Government And Public Sector

CTN :36188894

07 Jun, 2024 NA

Multi City - Karnataka

Tender For supply of ac drive with the following specification: 1.ac drive is required to drive squirrel cage in duction motor: 7.5 kw / 10 hp, 3 phase, 415 v ac, 50 hz, 4 pole / 6 pole, s1/s4 duty. 2. application: ac drive i s required for crane long travel / lathe / hydraulic pump motor/ conveyor applications. 3.ac drive mains supp ly: 3 phase, 380 ?400 v ac, 50 hz 4.ac drive nominal capacity (output rating): 7.5 kw, 16.0 amps rating. 5.m ounting type: panel mounting type, degree of protection: ip-20 6.the drive shall work without encoder feedback s ystem. the drive shall have to work with suitable current feedback system for speed control. the ac drive shall include required braking chopper, rfi / emc filter. 7.drive shall have inbuilt protection system: drive overload, e xcessive load, ground fault, heat sink over temperature, motor over load, over speed limit, over voltage, under vo ltage, short circuit etc. 8.the drive shall have provision to wok from the digital inputs in, up/down or forwar d / reverse direction, and in jog, start, stop, speed-1, speed-2 & speed-3 modes. 9.drive shall ha ve standard minimum; 6 digital inputs, 2 digital outputs, 2 analog inputs, 1 analog output and 2 relay outputs. 10.the drive shall have hmi with touchpad key mounted on it, to display various operating parameters in englis h. hmi shall also be capable of editing the drive parameters. drive shall have self-monitoring watch dog facility, t o display fault and alarm indications. 11.ac drive software program for crane duty application shall be supplied in soft copy. 12.suitable communication cable to communicate between laptop and ac drive shall be supplied al ong with the drive. 13.operating manual in hard copy shall be supplied along with the drive. 14.during the time of joint inspection at rwf, rwf will make necessary cable connections to the rated capacity induction motor & a c drive. the supplier has to test the ac drive for the rated capacity induction motor on the crane/ equipment, a nd t [ warranty period: 18 months after the date of delivery ]

Central Government/Public Sector

CTN :36166160

13 Jun, 2024 NA

Bhusawal - Maharashtra

Tender For (1)removal of ohe of examination line no. 1 & 2 in up marshalling yard at bhusawal.(2)trd work for installation and commissioning of new pit wheel lathe machine in els bhusawal.

CTN :34803110

15 May, 2024 60.21 Lacs

Bangalore - Karnataka

Tender For bid to ras providing of customized amc/cmc for pre-owned products - charges for annual maintenance contract for proteck cnc turning centre pl 500u; proteck; annual maintenance contract (amc); as per scope of work; no,customized amc/cmc for pre-owned products - charges for annual maintenance contract for proteck cnc turning centre pl 600u; proteck; annual maintenance contract (amc); as per scope of work; no,customized amc/cmc for pre-owned products - charges for annual maintenance contract for hardinge high precision cnc lathe; hardinge; annual maintenance contract (amc); as per scope of work; no,customized amc/cmc for pre-owned products - charges for annual maintenance contract for hmt sbcnc55 sbcnc35 cnc lathe; hmt; annual maintenance contract (amc); as per scope of work; no,customized amc/cmc for pre-owned products - charges for annual maintenance contract for max muller cnc lathe mdw43; hmt; annual maintenance contract (amc); as per scope of work; no,customized amc/cmc for pre-owned products - charges for annual maintenance cont

CTN :36068737

14 May, 2024 NA

Hisar - Haryana

Tender For corrigendum : supply of front shock observer , front wheel bearing , rear shock observer , rear wheel bearing , break liner , wheel balancing , liner , nuts and bolts , wheel bearing inner , wheel bearing outer , chamber packing , greasing , wheel fendor right , wheel fendor left , labour charges for above work , srearing bushes , stearing bearing , power stearing oil , lathe work for fixing , stearing liner , spokes , head light assay , tail light assay , worn out wire , indicator lamp , air filter , oil filter , rubber kit , gear level kit , engine oil 20w40 , gear oil , coolant , spring bushes , break shoe , governor kit , nozzle kit , dove bush , mechnical system of door glass lifting , battery cells , battery terminals , battery leads , recharging of battery including refilling of electrolyte solution having required specific gravity , m and l for patch repair of body by denting and making good of broken and teared body surfaces including painting same colour of the vehicle , cleaning and washing of vehicle by pressure pump and polishing of vehicle

CTN :35890331

18 May, 2024 13.98 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipment for an international standard itot in operator advanced machine tools (oamt) trade at iti suart, gujarat, india - surface grinding machine, cnc machining centre, cnc milling tools for above machine, cnc turn centre, cnc simulator, vertical-spindle five-axis machining centre, cnc tool pre setter, ss and sc center lathe (all geared) with having minimum specification, universal milling machine, horizontal milling machine, vertical milling machine, universal tool and cutter grinding machine, cnc lathe machine, edm, tool holders to suit the cnc machine turn centre and cnc lathe, jig boring, gear hubber, gear shaper machine, power saw machine-hydraulic feed system, cylindrical grinder, power saw machine, pedestal grinder double end type., radial drill motorized with tapping attachment, drilling machine pillar type with drill chuck & key., slotter, double column planer, shaping machine, shaping machine, co-ordinate measuring machine, cnc wire cut edm (electrical discharge machining), involutes gear module, work benches with bench vices and storage draws, scribing block universal, reduction sleeve morse taper, angle plate adjustable, machine vice, machine vice, machine vice, universal machine vice, universal table angle plate, surface plate, marking table, combination set, micrometer outside, micrometer outside, micrometer outside, digital micrometer outside, digital micrometer outside, digital micrometer outside, power saw machine, pedestal grinder double end type., radial drill motorized with tapping attachment, drilling machine pillar type with drill chuck & key., slotter, double column planer, shaping machine, shaping machine, co-ordinate measuring machine, cnc wire cut edm (electrical discharge machining), involutes gear module, work benches with bench vices and storage draws, scribing block universal, reduction sleeve morse taper, angle plate adjustable, machine vice, machine vice, machine vice, universal machine vice, universal table angle plate, surface plate, marking table, combination set, micrometer outside, micrometer outside, micrometer outside, digital micrometer outside, digital micrometer outside, digital micrometer outsidedigital vernier calliper, micrometer depth gauge, dial vernier calliper, vernier height gauge, vernier bevel protractor with blade, bevel gauge, telescopic gauge, sine bar, inside micrometer, inside micrometer, dial test indicator with magnetic base., slip gauge set (normal set) metric, plug gauges, ring gauges, snap gauge, vernier calliper, drill (parallel shank), twist drills, centre drill, grinding wheel dresser(diamond), tap & die set inbox metric pitch, reamer, reamer adjustable, taper shank twist drill set, shaper tool holder turret type, knurling tools (set of 3) straight and diamond, carbide tipped tools of different sizes and shapes (through away tips), cylindrical cutter, cylindrical cutter, side and face cutter, side and face cutter, side and face cutter, side and face cutter, equal angle cutter, equal angle cutter, equal angle cutter, "t" slot cutter, "t" slot cutter, "t" slot cutter, "t" slot cutter, single angle cutter, single angle cutter, single angle cutter, single angle cutter, double unequal angular cutter, double unequal angular cutter, end mill cutter, concave cutter, convex cutter, corner rounding cutter, corner rounding cutter, slotting cutter, slotting cutter, slitting saw cutter, slitting saw cutter, slitting saw cutter, dove tail milling cutter parallel shank, dove tail milling cutter parallel shank, dove tail milling cutter parallel shank, dove tail milling cutter parallel shank, shell & end mill cutter, shell & end mill cutter, face mill cutter with inserted tip, face mill cutter with inserted tip, face mill cutter with inserted tip, involutes gear module, number drill h.s.s(parallel shank), special tools and equipment, oil stone, drill chuck, grinding wheel dresser hunting type, clamp, clamp, v-block

Central Government/Public Sector

CTN :36108836

27 May, 2024 NA

Mumbai - Maharashtra

Tender For procurement of scrap bailing press machine for cnc under floor wheel lathe at wb depot under m&p programme 2022-23 (lsg).item no. bb-2223-0324 (civil work).

CTN :35718928

30 May, 2024 NA

Agra - Uttar Pradesh

Tender For corrigendum : tata(210) - 12x1.75x50 with washer spring, adlar, air cleaner assembly, air cleaner filter, air filter inner (lde0005631), air filter outer (lde0005630), alternator bearing ( 6202 ), alternator bearing plate a/l, alternator carbon, alternator carbon holder, alternator commutator, alternator cutout, alternator cutout (autolek), alternator pully, alternator rectifier plate, alternator rootar (autolek), alternator sleeve ring, alternator stater, ampeer meter, arm cylinder (sd00267), arm cylinder (wipro), arm cylinder assembly, bench wice 15 no, began bearing, blade lever wire assembly, bolt 19 no., bolt w/lock/nut/washer 7/16 4", bolt with nut 3x3" half round, bolt with washer 12 mm, bolt/nut (3" x 3"), bolt/nut 3/8", bolt/nut/lock & washer 4"x3/8", bolt/nut/washer 4"x3", bolt/spring washer 12x1.75x50, boom cyl (wipro) sd00266, boom cylinder (sd00266), bucket assembly, bucket bush set (se00726), bucket bush set (se00729), bucket cylinder (sd00268), bucket cylinder seal kit, bucket pin, bucket pin new making, bucket teeth with bolt, c. r. bush, cable stop (se01102), came oil seal, center joint assembly, chabi switch, chain repairing with material, chain spocket repairing with material, chain adjuster piston seal kit, chain adjuster seal kit, chain adjusting spring, chain roller (lower), chain roller (upper), chain roller assembly (lower), chain roller bolt washer, chain roller fitting bolt, chain spocket l, chain spocket r, chair adjusting spring, connecting rod bush, control cable (se01101), control valve assy. (se00799), diesel filter cover plate, diesel filter set, diesel return pipe, digital hourmeter (te01568), dust rubber o ring, e.n.8 60mm, edler assembly (ac00130), element (l002654408), engine foundation rear, engine head gaskit, engine lathe work complete, engine packing kit complete, engine packing kit with gaskit, engine silencer, engine sleeve, engine stop assembly, engine stopper wire, engine timing belt adjuster, fan belt, filter element (se00477), filter element stage-1 4773115, filter fuel (sc00202), fly wheel ring, fly wheel rubber coupling, fuel pump overhauling, g.p bucket assembly, gear oil (tl08010), gear pump assembly (sc00161), grees gun pipe, head gaskit, head guide, head seat steel, head valve, head valve exhaust, head valve guide, head valve inlet, head valve oil seal, head valve seal, head valve seat, head valve tikli, heater plug, heater push switch, hexagonal rod 25mm x 1mt., hexagonal rod 30mm x 1mt., horn meter, hour meter (electronic), hyd motor t.s.code 320b2000-fu, hyd lever distributor ring kit, hyd marchring motor pipe 2.5m, hyd blade lever pipe 1.5, hyd boom cylinder assembly, hyd boom cylinder pipe 2, hyd boom cylinder pipe 2.5mt, hyd boom cylinder pipe 2mt., hyd bucket cyl. pipe 2.5mt., hyd bucket cylinder pipe 2, hyd marching motor pipe (4), hyd marching motor pipe 1.5m, hyd marching motor pipe 1mt., hyd stick cylinder pipe 2.6m, hyd track motor pipe 2mt., hyd bucket cylender pipe 2.5, hyd track motor pipe 1mt., hyd arm cyl. pipe 1.5fee, hydraulic filter, hydraulic hose, hydraulic hose (2.1 mt.), hydraulic hose (2.5 mt.), hydraulic hose 1.5, hydraulic hose 1.5mt. long, hydraulic hose 2, hydraulic hose 2 long, hydraulic hose pipe (1mt.), hydraulic hose pipe (2 mt.), hydraulic hose pipe 4 feet, hydraulic hose(marching motor), hydraulic hose(stick cylinder), hydraulic lever, hydraulic lever ball kit, hydraulic lever boot, hydraulic lever o ring kit, hydraulic main pipe (1.5 mt.), hydraulic marching lever pipe, hydraulic motor (sb-00108), hydraulic pilot lever pipe 3, hydraulic pipe (3+2 mt. long), hydraulic pipe 1 mt., hydraulic pipe 1.25 mt., hydraulic pipe 1.25mt., hydraulic pipe 1.5, hydraulic pipe 1.5 mt., hydraulic pipe 1mt., hydraulic pipe 2, hydraulic pipe 2 feet, hydraulic pipe 2.5 mt., hydraulic pipe 2.5mt., hydraulic pipe 3, hydraulic pipe 4, hydraulic pipe 4.5, hydraulic pipe 5, hydraulic pipe bucket cylinder, hydraulic pump oil seal, hydraulic seal kit, idler assem

CTN :35719134

30 May, 2024 NA

Agra - Uttar Pradesh

Tender For corrigendum : jcb js--200 - 12x1.75x50 with washer spring, adlar, air cleaner assembly, air cleaner filter, air filter inner (lde0005631), air filter outer (lde0005630), alternator bearing ( 6202 ), alternator bearing plate a/l, alternator carbon, alternator carbon holder, alternator commutator, alternator cutout, alternator cutout (autolek), alternator pully, alternator rectifier plate, alternator rootar (autolek), alternator sleeve ring, alternator stater, ampeer meter, arm cylinder (sd00267), arm cylinder (wipro), arm cylinder assembly, bench wice 15 no, began bearing, blade lever wire assembly, bolt 19 no., bolt w/lock/nut/washer 7/16 4", bolt with nut 3x3" half round, bolt with washer 12 mm, bolt/nut (3" x 3"), bolt/nut 3/8", bolt/nut/lock & washer 4"x3/8", bolt/nut/washer 4"x3", bolt/spring washer 12x1.75x50, boom cyl (wipro) sd00266, boom cylinder (sd00266), bucket assembly, bucket bush set (se00726), bucket bush set (se00729), bucket cylinder (sd00268), bucket cylinder seal kit, bucket pin, bucket pin new making, bucket teeth with bolt, c. r. bush, cable stop (se01102), came oil seal, center joint assembly, chabi switch, chain repairing with material, chain spocket repairing with material, chain adjuster piston seal kit, chain adjuster seal kit, chain adjusting spring, chain roller (lower), chain roller (upper), chain roller assembly (lower), chain roller bolt washer, chain roller fitting bolt, chain spocket l, chain spocket r, chair adjusting spring, connecting rod bush, control cable (se01101), control valve assy. (se00799), diesel filter cover plate, diesel filter set, diesel return pipe, digital hourmeter (te01568), dust rubber o ring, e.n.8 60mm, edler assembly (ac00130), element (l002654408), engine foundation rear, engine head gaskit, engine lathe work complete, engine packing kit complete, engine packing kit with gaskit, engine silencer, engine sleeve, engine stop assembly, engine stopper wire, engine timing belt adjuster, fan belt, filter element (se00477), filter element stage-1 4773115, filter fuel (sc00202), fly wheel ring, fly wheel rubber coupling, fuel pump overhauling, g.p bucket assembly, gear oil (tl08010), gear pump assembly (sc00161), grees gun pipe, head gaskit, head guide, head seat steel, head valve, head valve exhaust, head valve guide, head valve inlet, head valve oil seal, head valve seal, head valve seat, head valve tikli, heater plug, heater push switch, hexagonal rod 25mm x 1mt., hexagonal rod 30mm x 1mt., horn meter, hour meter (electronic), hyd motor t.s.code 320b2000-fu, hyd lever distributor ring kit, hyd marchring motor pipe 2.5m, hyd blade lever pipe 1.5, hyd boom cylinder assembly, hyd boom cylinder pipe 2, hyd boom cylinder pipe 2.5mt, hyd boom cylinder pipe 2mt., hyd bucket cyl. pipe 2.5mt., hyd bucket cylinder pipe 2, hyd marching motor pipe (4), hyd marching motor pipe 1.5m, hyd marching motor pipe 1mt., hyd stick cylinder pipe 2.6m, hyd track motor pipe 2mt., hyd bucket cylender pipe 2.5, hyd track motor pipe 1mt., hyd arm cyl. pipe 1.5fee, hydraulic filter, hydraulic hose, hydraulic hose (2.1 mt.), hydraulic hose (2.5 mt.), hydraulic hose 1.5, hydraulic hose 1.5mt. long, hydraulic hose 2, hydraulic hose 2 long, hydraulic hose pipe (1mt.), hydraulic hose pipe (2 mt.), hydraulic hose pipe 4 feet, hydraulic hose(marching motor), hydraulic hose(stick cylinder), hydraulic lever, hydraulic lever ball kit, hydraulic lever boot, hydraulic lever o ring kit, hydraulic main pipe (1.5 mt.), hydraulic marching lever pipe, hydraulic motor (sb-00108), hydraulic pilot lever pipe 3, hydraulic pipe (3+2 mt. long), hydraulic pipe 1 mt., hydraulic pipe 1.25 mt., hydraulic pipe 1.25mt., hydraulic pipe 1.5, hydraulic pipe 1.5 mt., hydraulic pipe 1mt., hydraulic pipe 2, hydraulic pipe 2 feet, hydraulic pipe 2.5 mt., hydraulic pipe 2.5mt., hydraulic pipe 3, hydraulic pipe 4, hydraulic pipe 4.5, hydraulic pipe 5, hydraulic pipe bucket cylinder, hydraulic pump oil seal, hydraulic seal kit, idler ass

CTN :35719215

30 May, 2024 NA

Agra - Uttar Pradesh

Tender For corrigendum : tata-hit(tmx20) - 12x1.75x50 with washer spring, adlar, air cleaner assembly, air cleaner filter, air filter inner (lde0005631), air filter outer (lde0005630), alternator bearing ( 6202 ), alternator bearing plate a/l, alternator carbon, alternator carbon holder, alternator commutator, alternator cutout, alternator cutout (autolek), alternator pully, alternator rectifier plate, alternator rootar (autolek), alternator sleeve ring, alternator stater, ampeer meter, arm cylinder (sd00267), arm cylinder (wipro), arm cylinder assembly, bench wice 15 no, began bearing, blade lever wire assembly, bolt 19 no., bolt w/lock/nut/washer 7/16 4", bolt with nut 3x3" half round, bolt with washer 12 mm, bolt/nut (3" x 3"), bolt/nut 3/8", bolt/nut/lock & washer 4"x3/8", bolt/nut/washer 4"x3", bolt/spring washer 12x1.75x50, boom cyl (wipro) sd00266, boom cylinder (sd00266), bucket assembly, bucket bush set (se00726), bucket bush set (se00729), bucket cylinder (sd00268), bucket cylinder seal kit, bucket pin, bucket pin new making, bucket teeth with bolt, c. r. bush, cable stop (se01102), came oil seal, center joint assembly, chabi switch, chain repairing with material, chain spocket repairing with material, chain adjuster piston seal kit, chain adjuster seal kit, chain adjusting spring, chain roller (lower), chain roller (upper), chain roller assembly (lower), chain roller bolt washer, chain roller fitting bolt, chain spocket l, chain spocket r, chair adjusting spring, connecting rod bush, control cable (se01101), control valve assy. (se00799), diesel filter cover plate, diesel filter set, diesel return pipe, digital hourmeter (te01568), dust rubber o ring, e.n.8 60mm, edler assembly (ac00130), element (l002654408), engine foundation rear, engine head gaskit, engine lathe work complete, engine packing kit complete, engine packing kit with gaskit, engine silencer, engine sleeve, engine stop assembly, engine stopper wire, engine timing belt adjuster, fan belt, filter element (se00477), filter element stage-1 4773115, filter fuel (sc00202), fly wheel ring, fly wheel rubber coupling, fuel pump overhauling, g.p bucket assembly, gear oil (tl08010), gear pump assembly (sc00161), grees gun pipe, head gaskit, head guide, head seat steel, head valve, head valve exhaust, head valve guide, head valve inlet, head valve oil seal, head valve seal, head valve seat, head valve tikli, heater plug, heater push switch, hexagonal rod 25mm x 1mt., hexagonal rod 30mm x 1mt., horn meter, hour meter (electronic), hyd motor t.s.code 320b2000-fu, hyd lever distributor ring kit, hyd marchring motor pipe 2.5m, hyd blade lever pipe 1.5, hyd boom cylinder assembly, hyd boom cylinder pipe 2, hyd boom cylinder pipe 2.5mt, hyd boom cylinder pipe 2mt., hyd bucket cyl. pipe 2.5mt., hyd bucket cylinder pipe 2, hyd marching motor pipe (4), hyd marching motor pipe 1.5m, hyd marching motor pipe 1mt., hyd stick cylinder pipe 2.6m, hyd track motor pipe 2mt., hyd bucket cylender pipe 2.5, hyd track motor pipe 1mt., hyd arm cyl. pipe 1.5fee, hydraulic filter, hydraulic hose, hydraulic hose (2.1 mt.), hydraulic hose (2.5 mt.), hydraulic hose 1.5, hydraulic hose 1.5mt. long, hydraulic hose 2, hydraulic hose 2 long, hydraulic hose pipe (1mt.), hydraulic hose pipe (2 mt.), hydraulic hose pipe 4 feet, hydraulic hose(marching motor), hydraulic hose(stick cylinder), hydraulic lever, hydraulic lever ball kit, hydraulic lever boot, hydraulic lever o ring kit, hydraulic main pipe (1.5 mt.), hydraulic marching lever pipe, hydraulic motor (sb-00108), hydraulic pilot lever pipe 3, hydraulic pipe (3+2 mt. long), hydraulic pipe 1 mt., hydraulic pipe 1.25 mt., hydraulic pipe 1.25mt., hydraulic pipe 1.5, hydraulic pipe 1.5 mt., hydraulic pipe 1mt., hydraulic pipe 2, hydraulic pipe 2 feet, hydraulic pipe 2.5 mt., hydraulic pipe 2.5mt., hydraulic pipe 3, hydraulic pipe 4, hydraulic pipe 4.5, hydraulic pipe 5, hydraulic pipe bucket cylinder, hydraulic pump oil seal, hydraulic seal kit, idler

CTN :35719217

30 May, 2024 NA

Agra - Uttar Pradesh

Tender For corrigendum : hyundai 80 - adlar, air cleaner assembly, air cleaner filter, air filter inner (lde0005631), air filter outer (lde0005630), alternator bearing ( 6202 ), alternator bearing plate a/l, alternator carbon, alternator carbon holder, alternator commutator, alternator cutout, alternator cutout (autolek), alternator pully, alternator rectifier plate, alternator rootar (autolek), alternator sleeve ring, alternator stater, ampeer meter, arm cylinder (sd00267), arm cylinder (wipro), arm cylinder assembly, bench wice 15 no, began bearing, blade lever wire assembly, bolt 19 no., bolt w/lock/nut/washer 7/16 4", bolt with nut 3'x3" half round, bolt with washer 12 mm, bolt/nut (3" x 3"), bolt/nut 3/8"', bolt/nut/lock & washer 4"x3/8", bolt/nut/washer 4"x3"', bolt/spring washer 12x1.75x50, boom cyl (wipro) sd00266, boom cylinder (sd00266), bucket assembly, bucket bush set (se00726), bucket bush set (se00729), bucket cylinder (sd00268), bucket cylinder seal kit, bucket pin, bucket pin new making, bucket teeth with bolt, c. r. bush, cable stop (se01102), came oil seal, center joint assembly, chabi switch, chain repairing with material, chain spocket repairing with material, chain adjuster piston seal kit, chain adjuster seal kit, chain adjusting spring, chain roller (lower), chain roller (upper), chain roller assembly (lower), chain roller bolt washer, chain roller fitting bolt, chain spocket l, chain spocket r, chair adjusting spring, connecting rod bush, control cable (se01101), control valve assy. (se00799), diesel filter cover plate, diesel filter set, diesel return pipe, digital hourmeter (te01568), dust rubber o ring, e.n.8 60mm, edler assembly (ac00130), element (l002654408), engine foundation rear, engine head gaskit, engine lathe work complete, engine packing kit complete, engine packing kit with gaskit, engine silencer, engine sleeve, engine stop assembly, engine stopper wire, engine timing belt adjuster, fan belt, filter element (se00477), filter element stage-1 4773115, filter fuel (sc00202), fly wheel ring, fly wheel rubber coupling, fuel pump overhauling, g.p bucket assembly, gear oil (tl08010), gear pump assembly (sc00161), grees gun pipe, head gaskit, head guide, head seat steel, head valve, head valve exhaust, head valve guide, head valve inlet, head valve oil seal, head valve seal, head valve seat, head valve tikli, heater plug, heater push switch, hexagonal rod 25mm x 1mt., hexagonal rod 30mm x 1mt., horn meter, hour meter (electronic), hyd motor t.s.code 320b2000-fu, hyd lever distributor ring kit, hyd marchring motor pipe 2.5m, hyd blade lever pipe 1.5', hyd boom cylinder assembly, hyd boom cylinder pipe 2', hyd boom cylinder pipe 2.5mt, hyd boom cylinder pipe 2mt., hyd bucket cyl. pipe 2.5mt., hyd bucket cylinder pipe 2', hyd marching motor pipe (4'), hyd marching motor pipe 1.5m, hyd marching motor pipe 1mt., hyd stick cylinder pipe 2.6m, hyd track motor pipe 2mt., hyd bucket cylender pipe 2.5', hyd track motor pipe 1mt., hyd arm cyl. pipe 1.5fee, hydraulic filter, hydraulic hose, hydraulic hose (2.1 mt.), hydraulic hose (2.5 mt.), hydraulic hose 1.5', hydraulic hose 1.5mt. long, hydraulic hose 2', hydraulic hose 2' long, hydraulic hose pipe (1mt.), hydraulic hose pipe (2 mt.), hydraulic hose pipe 4 feet, hydraulic hose(marching motor), hydraulic hose(stick cylinder), hydraulic lever, hydraulic lever ball kit, hydraulic lever boot, hydraulic lever o ring kit, hydraulic main pipe (1.5 mt.), hydraulic marching lever pipe, hydraulic motor (sb-00108), hydraulic pilot lever pipe 3', hydraulic pipe (3+2 mt. long), hydraulic pipe 1 mt., hydraulic pipe 1.25 mt., hydraulic pipe 1.25mt., hydraulic pipe 1.5', hydraulic pipe 1.5 mt., hydraulic pipe 1mt., hydraulic pipe 2', hydraulic pipe 2 feet, hydraulic pipe 2.5 mt., hydraulic pipe 2.5mt., hydraulic pipe 3', hydraulic pipe 4', hydraulic pipe 4.5', hydraulic pipe 5', hydraulic pipe bucket cylinder, hydraulic pump oil seal, hydraulic seal kit, idler assembly, idler a

Air Supply Equipment Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector