Latest alloy rod Tenders | Government alloy rod Tenders

Central Government/Public Sector

CTN :40921970

23 Jul, 2025 NA

Panisagar - Tripura

Tender For supply of clutch plate , pressure plate , clutch release bearing , lower clutch cylinder assy , brake shoe linner with riv , king pin kit , front hub bearing outer , front hub bearing inner , hub oil seal front left and right , hub oil seal rear left and right , tie rod end kit , drag rod end kit , centre bolt leaf spring front , shock absorber front , balancing rod bush , balancing rod nut bolt , uj cross propeller shaft , rear brake shoe retainer spring , nut with bolt , head light bulb , gm bush , ms sheet 16 gauge , nut bolt lock type , self screw chinese type , water prof ply 4x8x12 mm , pvc flooring sheet , pvc cutter , cutting blade 5 inch , self screw box

Central Government/Public Sector

CTN :40932724

23 Jul, 2025 NA

Perambur - Tamil Nadu

Tender For supply of srphc544226-titanium poly axial fenestrated screws (thoraco lumbar screws)use d for thoracolumbar fixation and stabilization in poor/compromised bone quality to treat tr auma tumor and degenerative pathologies .system should have cannulated screws with the a ddition of at least four fenestrations near the tip. system should have been designed to allo w screw insertion through either open or minimally invasive approach. system should have re verse thread technology with sizes 5.5 6.5 7.5 mm diameter and 30-55mm in length .system shou ld have break off plug mechanism should be compatible with 5.5mm rod . screw should have a tleast an angle of not more than 28degree between head and body. should be supplied with o ne disposable screw fenestrated adapter system and one bone filler device. system should be registered with drug controller general of india. system should be iso or bis or fda or ce ap proved- equivalent/ similar to vcsmed, gesco, gs medical /korea. unit:no [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: ma x 8 lacs ]

Central Government/Public Sector

CTN :40932792

24 Jul, 2025 NA

Perambur - Tamil Nadu

Tender For supply of srphc544219-titanium polyaxial non fenestrated screws(thoracolumbar screws). used for thoracolumbar fixation and stabilisation in spine trauma degenerative and tumor s urgeries. pedicular screws should have a reverse threaded mechanism and should be compati ble with 5.5mm titanium rod. screws should be available in sizes of 4.5 5.5 6.5 mm27.5 mm diamet er and 25-55mm in length. system should have break off plug mechanism.screw should have an angle of not more than 28 degree between the head and body. system should be compatible f or minimally invasive surgical technique and also be used along with fenestrated or/and hyd roxyapatite coated screws. system should be registered with drug controller general of in dia. system should be iso or bis or fda or ce approved - equivalent/ similar to dynamed ,gesco, nirupama ,ossistec ,ricon brands. unit:no [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: ma x 8 lacs ]

corporations/Associations/Others

CTN :40478582

12 Jul, 2025 NA

Chennai - Tamil Nadu

Tender For corrigendum : tender for supply of broken screw and nail removal set and universal nail extraction set - hollow reamer , complete , anticlockwise cutting , for screws 3.5 and 4.0 mm , extraction bolt , for screws 3.5 and 4.0 mm , hollow reamer , complete , anticlockwise cutting , for screws 4.5 mm , extraction bolt , for screws 4.5 and 5.0 mm , extraction screw for screws 3.5 mm , extraction screw , conical , for screws 4.5 and 6.5 mm , t-handle with quick coupling , screwdriver shaft , hexagonal , small , 2.5 mm , screwdriver shaft , hexagonal , large , 3.5 mm , hss drill bit 3.5 mm for implant steel , sterile , hss drill bit 2.5 mm for implant steel , sterile , screwdriver shaft , stardrive , t8 , self-holding , forceps for screw removal , l 205mm , gouge , 10mm wide , l 205mm , hollow reamer for 5.0 / 6.0 / 6.5 / 7.0 mm screws , extraction bolt , for 5.0 / 6.0 / 6.5 / 7.0 mm screws , sharp hook , l 155mm , screw driver shaft stardrive t15 , 3.5 , screw driver shaft stardrive t25 , 3.5 , handie with quick coupling , extraction plier for screws , to grasp screws behind the screw head , screw driver hexagonal cannulated 4.5 , screw driver hexagonal cannulated 6.5 , connector with thread , for extraction hook , extraction hook , length 480 mm , for nails dia 9.0 mm , extraction hook , iong , for nails dia 9.0 mm to 11.0 mm , extraction hook , iong , for nails dia 11.0 mm to 14.0 mm , t- handle with quick coupling , box tray for instruments , including all conical / straight bolts , extraction rod , slot hammer etc.

Central Government And Public Sector

CTN :39762131

23 Jul, 2025 NA

Surat - Gujarat

Tender For corrigendum : supply of spare parts for fuelling machines - ss-410 annealed as per drg. no. kapp-3 and 4-35221-3073- dd. , procurement of raw material, manufacturing, testing, inspection, packing and supply of a, b and d piston head as per drg. no. kapp-3 and 4-35221-3108-dd. , procurement of raw material, manufacturing, testing, inspection, packing and supply of c piston head as per drg. no. kapp-3 and 4-35221- 3099-dd. , procurement of raw material, manufacturing, testing, heat treatment, inspection, packing and supply of c bush as per drg. no. kapp-3 and 4-35221-3107-dd. , procurement of raw material, manufacturing, testing, heat treatment, inspection, packing and supply of a piston rod as per drg. no. kapp-3 and 4-35221-3079-dd. , procurement of raw material, manufacturing, testing, heat treatment, inspection, packing and supply of c piston rod as per drg. no. kapp-3 and 4-35221-3080-dd. , procurement of raw material, manufacturing, testing, heat treatment, inspection, packing and supply of b and d piston rod as per drg. no. kapp-3 and 4-35221-3081-dd. , procurement of raw material, manufacturing, testing, heat treatment, inspection, packing and supply of c piston extension as per drg. no. kapp-3 and 4-35221-3096-dd. , procurement of raw material, manufacturing, testing, heat treatment, inspection, packing and supply of a piston extension as per drg. no. kapp-3 and 4-35221-3120-dd. , procurement of raw material, machining, testing, heat treatment, inspection, packing and supply of b and d piston extension as per drg. no. kapp-3 and 4-35221- 3105-dd. , procurement of raw material, manufacturing, inspection, packing, and supply of hexagonal nut, material_ astm a193 grade 4 as per drg. no. kapp-3 and 4-35221- 2466-dd. , procurement of raw material, manufacturing, inspection, packing, and supply of washer, material_ ss-410 annealed as per drg. no. kapp-3 and 4-35221-2468-dd. , procurement of raw material, manufacturing, inspection, packing, and supply of stud, material_ astm a193 grade b7 as per drg. no. kapp-3 and 4-35221-2465-dd. , procurement of raw material, manufacturing, inspection, packing, and supply of hex. socket head cap screw size m20 x 2.5 -6g x 90 mm lg, material_ hts cadmium plated. , procurement of raw material, manufacturing, inspection, packing, and supply of wedge segment as per drg. no. kapp-3 and 4-35221-2412- dd with compliance of note no. 5. , procurement of raw material, manufacturing, inspection, packing, and supply of preloading nut as per drg. no. kapp-3 and 4-35221-2399-dd. , procurement of raw material, manufacturing, inspection, packing, and supply of cavity filling pipe as per drg. no. kapp-3 and 4-35221-2434-dd. , procurement of raw material, manufacturing, inspection, packing, and supply of pipe retainer as per drg. no. kapp-3 and 4-35221-2435-dd. , procurement of raw material, manufacturing, inspection, packing, and supply of post belleville washer as per drg. no. kapp-3 and 4-35221-2457-dd. , procurement of raw material, manufacturing, inspection, packing, and supply of bearing retainer as per drg. no. kapp-3 and 4-35221-2448-dd. , procurement of raw material, manufacturing, inspection, assembly, packing and supply of port plate for fm snout hydraulic motor as per drg. no. kapp-3 and 4-35226-2043-dd , procurement of raw material, manufacturing, inspection, packing, and supply of spring adjuster, material_ ss-304 as per drg. no. kapp-3 and 4-35221-2491-dd. , raw material, manufacturing, inspection, heat treatment, packing and supply of wire take up pulley, material_ astm a564 grade 630 condition h1025, hrc 35-42 as per drg. no. kapp-3 and 4-35221-2165-sk1 , procurement of raw material, manufacturing, inspection, heat treatment,packing and supply of hub, material_ astm a564 grade 630 condition h1100, hrc 32-38 as per drg. no. kapp-3 and 4-35221-2153- bid details/ 2 / 47 h1100, hrc 32-38 as per drg. no. kapp-3 and 4-35221-2153- dd

CTN :40903240

04 Jul, 2025 NA

Poonch - Jammu And Kashmir

Tender For corrigendum : supply of clutch slinder kit , slive cylinder , baby filter , air filter , oil filter , jack kit , coconut stick , bomboo , iron ring , pen vsign pen , customized dtrone landing gear , drawing roll , talc sheet , cold lamination roll , hard talc roll , transpartent binding cover , white board marker , fevi quick , parmanent martker , paper a4 , paper a3 , white colour chalk , scissors , tape , brown tape , fevibond , flex bond , cutter , cutter blade , gun taker pin , stapler big , slide sheet oddy , pen set v5 rt , 3d prinboating filament , pencil , ply 12 mm , ply 19 mm , kabza 4 inch , holdraf 12 , towerbot 6 , dash board polish , perfume air pro , temper hunman , electric board single socket , flexible wire , copper wire , electric board socket , bed switch , male female plug , plastic cable clip 10 mm , plastic cable clip u clip 12 mm , plastic cable 14 mm , screw 1.5inch , screw 2 inch , nylon wall plug , casing caping , insulation tape , welding rod , wood cutter blade

CTN :40921878

23 Jul, 2025 NA

Allahabad - Uttar Pradesh

Tender For supply of cement opc 43 grade in hdpe bag of 50 kg each , natural sand , aggregate 20mm , aggregate 40mm , hollow blocks of size 600mmx200mmx200mm , water proofing compound , ms tmt bar of size 8mm dia , ms tmt bar of size 10mm dia , ms tmt bar of size 12mm dia , pvc pipe of size 12inch dia , pvc pipe of size 8inch dia , pvc pipe of size 6inch dia , pvc pipe of size 4inch dia , pvc elbow of size 6inch dia , pvc tee of size 6inch dia , pvc tee of size 4inch dia , pvc elbow reducer of size 8inch to 6inch , pvc tee reducer of size inch to 6inch , pvc adhesive pipe fitting solution , ms binding wire not less than 0.9mm dia , 12mm dia plywood of size 2.5x0.3m , frp green transparent sheet , ms square hollow section of size 50x50x3.00mm , self taping screw 3inch long , nails 2inch , welding rod , aenerobic bacteria for septic tank

CTN :40686045

08 Jul, 2025 NA

Kamrup - Assam

Tender For corrigendum : supply of items mentioned below are for 01x large living shelter , b and r items for of supertructure of large living shelter of size 18.30m x 6.10m x 4.75m height , ceramic tiles of size 600 mm x 600 mm for floor thickness between 9 to 10 mm thick make johnson kajaria orient , white cement conforming to is 8042 and 1989 make acc or birla white or ambuja , peg set of six fitted with galvanised screws along the internal surface of the walls in the rooms , curtain arrangement drapery and rod made of 25 mm dia and 1600 mm long , e and m items for of supertructure of large living shelter of size 18.30m x 6.10m x 4.75m height with 1.50 m enclosed verandah in front and rear side with living room with covee slope roof , distribution box 8 way spn 240 volts copper bus bar and neutral link earthing stud conforming to is 13032 and is 8623 double door type make havells legre or l and t , mcb spn 240 volts 32 amps make havells or finolex or polycab or natural white or equivalent , mcb sp 6 to 32 amps havells or finolex or polycab or natural white or equivalent , pvc tape 19mm wide 5m long make steel grip or anchor or kilinjal , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of size 1.5 sqmm single core frls confirming to is 1554 part 1 1988 , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of size 2.5 sqmm single core frls confirming to is 1554 part 1 1988 , cable pvc insulated electric cables heavy duty 1100 volts grade multi stranded copper conductor of size 4 sqmm single core frls confirming to is 1554 part1 1988 , pvc casing capping 1 medium grade snow white make presto and polycab and finolex , pvc casing capping of size 3 by 4 inch medium grade snow white make havells or finolex or polycab or natural white or equivalent , switch piano 5 amp 230 volts flush type one way snow white make havells or finolex or polycab or natural white or equivalent , led tuble light fittings 15w 230v box type 4 feets with crca body pre coated white and prewired for led tuble complete make havells or bajaj or philips or crompton , steel screw full thread with rawl plug plug of size 1 and 1 half 2 inch size isi marked 100 nos and pkt , pvc switch board snow white of size 7 inch x 4inch for socket and switches make havells or finolex or polycab or natural white or equivalent , pvc switch board snow white of size 8 x 10 inch for main switch db make havells or finolex or polycab natural or white or equivalent , pvc l bend and t junction joint for pvc casing and caping conforming to is-3419 part-iii make havells or finolex or polycab or natural white or equivalent , switch socket combination snow white multipurpose 2 in 1 or 15a or 230v make havells or finolex or polycab or natural white or equivalent , switch socket combination snow white 5a 230v make havells or finolex or polycab or natural white or equivalent , service bracket 40mm dia gi tubing medium grade 1.5m long make jindal or tata or kalinga , service cable pvc insulated aluminium conductor 1100 volt grade heavy duty served with inner sheathing of pvc tap and overall pvc sheathed in service connection 10 sqmm 2 core , ceiling rose three terminal snow white make anchor or ssk or cona , led bulk head fitting high pressure die cast aluminum front cover with glass cover with specially design gasket with led lamp 10 watts make havells or bajaj or philips or crompton , pvc flexible wire copper conductor multi stranded 0.0016 per 76 make havells or finolex or polycab or natural white or equivalent , pvc flexible conduit pipe 15mm dia make polycab or supreme or finolex , pvc round or square block make polycab or supreme or finolex , exhaust fan 230 volts 300 mm sweep plastic body alongwith louvers and complete fittings make bajaj and havells and crompton , fire exitingusher of 1kg capacity of dry powder type conform to is-13849 alongwith accessories make-cease fire or omex or alfa fire , earthing p

CTN :40916611

03 Jul, 2025 NA

Udhampur - Jammu And Kashmir

Tender For supply of leather cloth black , sheet cellular foam , sr foam solution , elect welding rod , screw bsf pre steel hex , screw unf pre steel hex , screw machine slotted , screw grad unc r steel , thread tape , fevi quick , m seal , insulation tape , lt wire , araldite , alcohol isopropile technical

CTN :40916603

05 Jul, 2025 NA

Srinagar - Jammu And Kashmir

Tender For supply of poly pro lene head steel screw , road , tape , rubber hollow mat 2 x3.5 , drilling screw 2 inch , drilling screw 2.5 inch , drilling screw 3 inch , welding rod 10 no , welding rod 12 no , welding rod 8 no , iron cutting black , iron cutting black 14 inch , inchtape , notice board , cloth matic board 2x3 , drawing sheet , cartridge canon , talk sheet , mouse pad , rubber mat 2x2.5 , war dairy for sa office and ok report register , dvr camera vichel camera , hand held metal detector , camera cable , stool bar chair , roller blinds 54 inch x 54 inch , roller blinds 54 inch x 42 inch , pen reynolds blue black red , pencil apsara , drawing sheet all colour , iron grinding wheel

Alloy Rod Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government And Public Sector