Latest alluminium partition Tenders | Government alluminium partition Tenders

CTN :39500170

17 Mar, 2025 NA

Jalandhar - Punjab

Tender For bid to ras supply of toilet seat covers (v2) (q4) , copper alloy fancy taps for bathroom as per is 8931 (latest) (q3) , flushing cistern (q3) , bathroom water shower (q3) , hydraulically regulated door closers (q3) , bathroom or toilet mirror (v2) (q4) , towel rail / ring for bathroom (q3) , taps or valves of nonferrous metals (q3) , connection pipe with nuts (v2) (q3) , ptmt tap fitting (q3) , waste fittings for washbasin and sinks as per is 2963 (q3) , tower bolts (ferrous metals) as per is 204 (q3) , wire mesh fabric or cloth (v2) as per is 1568 (q3) , waste pipe (q3)

CTN :39694310

18 Mar, 2025 NA

Pune - Maharashtra

Tender For supply of copper alloy fancy taps for bathroom as per is 8931 (latest) (q3) , plastics bib taps pillar taps angle valves and stop valves as per is 9763:2000 (latest) (q3) , towel rail / ring for bathroom (q3) , connection pipe with nuts (v2) (q3) , bathroom water shower (q3) , waste pipe (q3) , sinks (q3) , sinks / wash basins - vitreous china as per is 2556 (part 4) (q3) , toilet seat - indian style squatting pan (q3) , flushing cistern (q3) , toilet seat covers (v2) (q4) , curtain pipe, sider and mounting bracket (q4) , wire mesh fabric or cloth (v2) as per is 1568 (q3) , waste fittings for washbasin and sinks as per is 2963 (q3) , floor drain traps (q3) , door handles as per is 208 (q4) , tower bolts (ferrous metals) as per is 204 (q3) , hasps and staples as per is 363 (q3) , wire nails (q4) , wood screws (q3) , m - seal as per is 9197 (q3) , hydraulically regulated door closers (q3) , bathroom or toilet mirror (v2) (q4) , commercial cpvc pipe fittings (q3)

State Government

CTN :39676496

19 Mar, 2025 50.00 Lacs

Jaisalmer - Rajasthan

Tender For inviting tender for supply of extra material and equipment for mgnrega and other scheme for fy 2024-25 gp pochina p s sam dist jaisalmer-, ghadla/kankar/jhajhra, , mud masala, , lime from kali kiln for lime masonry work, , cement, , ppc, , white cement, , fine aggregate, , sand/gravel, , gravel - local, , rakhi (fly ash), , surkhi, , stone dust (in masonry work), , ballast stone/brick (for other than road work), , hand broken stone grit 40mm size) (cut voids 1/11), , 40mm grit stone (broken by crusher) (cut nodules 1/11), , 20mm grit stone (broken by crusher), , 12/10/6mm print of stone(broken by crusher), , brick ballast, , material for road work (including 5 km lead), , 63-40mm crushed stone aggregate (cut voids 1/11), , 63-40mm hand cut rotorites for broken stone 1/11), , 90-45mm. radius of hand broken stone (cut ids 1/11), , query rabinsh (voids cart 1/c), , gravel (voids cart 1/6), , kankar (wide cart 1/6), , binding material (pi 4-6) (cut tights 1/6), , brick (22.5 x 11 x 7.50 cm), , first class, , second class (!! class), , soling / kharanja / masonry stone, , masonry barda (rr), , masonry course (cr), , kharja soling (for flooring work upto 15cm height), , kharja soling (23cm height for road/ kharja work), , jodhpuri type stone slabs, arches/slabs (length 2-3', width 10-, , 12", thickness 2.5-3.5"), , flaky material (3-4" thick & length and width 1-2"), , sandstone (dpc, sill, coping, lintel, tand, almirha etc), , up to 25mm thickness, , up to 25-40mm thickness, , upto 40-50mm thickness, , up to 50-75mm thickness, , upto 75-100mm thickness, , upto 100-150mm thickness, , fash / patti patan katla pattar, , floor planks upto 35mm thick, min, 3 sqft or more area, , katla for strip paving 60-75mm thickness, min. 3 sqft or more area, , unpolished rough kota stone, , upto 900 sq.cm, , 901 to 2300 sq. cm, , more than 2300 sq.cm, , polished kota stone (one side polished), , upto 900 sq.cm, , 901 to 2300 sq. cm, , more than 2300 sq.cm, , marble stone (makrana adanga 20mm thick), , 901 to 2300 class patients, , upto 900 sq.cm, , more than 2300 sq.cm, , marble chips, , bhabal powder, , marble stone (rajnagar || quality/local 20mm thick), , 901 to 2300 class patients, , upto 900 sq. cms, , more than 2300 sq.cm, , stone frame, , single patam size 10075 g., , double petam size 125 x 75 mm., , stone slabs, , un to 1.5 m length, minimum 40mm thick, , 1.5 m to 2.40 m length, minimum 50mm thick, , 2.4 m to 3.0 m length, minimum 65mm thick, , above 3.0 m length, minimum 75mm thick, , precast tiles/blocks, , glazed size-30x45 cm, , mosaic size-40mm thick, , vitrified size-60x60 cm, , interlock tiles/brick/block for road work, , cernent interlocking block m-30grade, comm thick, , cement interlocking block m-30grade, 80mm thick, , cernent interlocking block m-30grade, 100mm thick, , fr pvc insulated copper conductor single core cable isi marked, , 1.50 sq. mg., , 2.53 square km., , 10.50 sq.m., , 1.00 sq m., , 14.00 sq. mm., , 8.00 sq. mm., , local wood wood fittings (door, window and furniture), , fire, , acacia, , other, , factory made doors (30mm thick, solid car single leaf), , structural stole, , iron (tar steel fe 415/500 for reinforcing paint), , widening wire 18 gal, , iron guard, , conical iron/square bar/leaf/angle iron, , barbed iron wire(size 12 guage wire and 12 guage strad/12 guage wire and 14 guage strad/14 guage, , forged, , iron mesh (24 gauge, 14 mesh), , cement concrete lattice sky underworld 40mm thick, , glass, , 13 mm thick glass, , palette, , inamil paint, , distepar (water bound), , lime - for whitewashing (aras / bud), , primer (for iron / wood), , petroleum products, , diesel hsd, , godil oil, , vihan shalitex board (25 mm thick), , shada shetty (plain sheet), , c.i. sheet 22 gauge (0.80 mm), , j.i. sheet 24 yards (0.03 mrn), , ms sheet 22 pages (0.80 mm), , m.s. sheet 24 gauge (0.63 mm), , corrugated sheet, , ja. i. blanket 1 gg. goti, , c.i sheet 22 gauge (0.80 m.m.), , aswastg somet sheet 6mm(2.5/2.75x1m), ,

CTN :39618228

25 Mar, 2025 3.00 Lacs

Ujjain - Madhya Pradesh

Tender For yearly supply of hardware and paints material in vikram university ujjain - yearly supply of hardware and paints material, wooden screws all sizes (pkt. of 200 no.), towar bolt heavy (iron) 3" to 6", towar bolt heavy (iron) 6" to 8", wire nails all sizes, binding wire, putty for glasses, plain glass 3.5 mm. with fixing, ground glass 4 mm. with fixing, wire mesh jalli 24 gauge x 144 mesh, plain g.i. sheets 24 gauge, hydraulic door closer, fevicol, thinner, katani lime 1st qlty. (25 kg. bag), geru (35 kg. bag), turpentine oil, double hair painting brush per 25 mm. (wilson), double hair painting brush per 25 mm. (bharat), synthetic enamel paint including steiner 1 ltr. tin(asian/burger), synthetic enamel paint including steiner 4 ltr. tin(asian/burger), synthetic enamel paint including steiner 10 ltr. tin (asian/burger), oil bound distemper 5 kg. tin (asian/burger), oil bound distemper 10 kg. tin (asian/burger), oil bound distemper 20 kg. tin (asian/burger), red oxide (asian/burger), white cement (jk/birla), super decoplast plastic emulsion 5 kg. tin (asian/burger), super decoplast plastic emulsion 10 kg. tin (asian/burger), super decoplast plastic emulsion 20 kg. tin, aluminum paint (asian/burger), cement paint super snowcem, lock 6 lever 45 mm. (laxmi/harrison), lock 6 lever 60 mm. (laxmi/harrison), mortich lock 7 lever complete isi (laxmi/harrison), flush door 30 mm., aldrop nickel plasted 4", aldrop nickel plasted 6", aldrop nickel plasted 8", aldrop nickel plasted 10", aldrop nickel plasted 12", phawra with wooden handel, screw driver (taparia), playar (taparia), aluminium section two track 20 gauge (openable/slider/including 5 mm. glass with accessoes & including fixing ) with powder coating, aluminium section three track 20 gauge (openable/slider/including 5 mm. glass with accessoes & including fixing ) with powder coating, bracket for curtain, consild bracket, s.s. pipe 1", iron chain heavy, screw 1" full thread, screw 2" full thread, screw 3" full thread, door kit complete, geti with wooden handel, kulhari with wooden handel, grass cutter patti, marble powder, hexa blade dp., bombay nails all size, cotton mope, sika jhadu, phool jhadu, nutbolt all size, hinges 6", hinges 4", pvc. ceiling with installation, netlon jali, rope 10 mm.

CTN :39651973

01 Apr, 2025 NA

Gwalior - Madhya Pradesh

Tender For tender for supply of led batten , onload changeover switch , offload changeover switch , onload changeover switch , mccb , mcb , switch flush type , fr pvc insulated unsheathed flexible wire copper conductor 1100 v grade , cable , fr pvc insulated unsheathed flexible wire copper conductor 1100 v grade , under ground cable armoured , sink mixer , kitchen sink mixer , angle stop cock , looking mirror , wire mesh , bath room cabinate single mirror , floor spring , glass pane , brass spindle for cp bib cock and pillar cock , rubber beading , gi nipple , piller cock , pvc shower rose , gi socket , gi nipple , gi union , ss handle anodised , ss handle anodised , gi plug , ss sliding door bolt

CTN :39654074

20 Mar, 2025 NA

Jalandhar - Punjab

Tender For supply of copper alloy fancy taps for bathroom as per is 8931 (latest) (q3) , bathroom water shower (q3) , towel rail / ring for bathroom (q3) , flushing cistern (q3) , taps or valves of nonferrous metals (q3) , bathroom or toilet mirror (v2) (q4) , waste pipe (q3) , sinks (q3) , european pattern toilet seat vitreous china (q3) , waste fittings for washbasin and sinks as per is 2963 (q3) , connection pipe with nuts (v2) (q3) , hydraulically regulated door closers (q3) , tower bolts (ferrous metals) as per is 204 (q3) , wire mesh fabric or cloth (v2) as per is 1568 (q3) , ptmt tap fitting (q3) , plastics bib taps pillar taps angle valves and stop valves as per is 9763:2000 (latest) (q3) , hasps and staples as per is 363 (q3)

CTN :39671245

02 Apr, 2025 NA

Nicobar Island - Andaman And Nicobar Islands

Tender For tender for supply of aluminium partition from particle board and 5 mm glass , aluminium door comprising all components of door closer handle and fixing charge , computer table as per ser 3 scope of work , executive table as per ser 4 of scope of work , executive mesh chair revolving eezy model number 454a , revolving mesh chair eezy model number 448a , white board , file cabinet as per ser 8 of scope of work , cap stand as per ser 9 of scope of work , cap stand as per ser 10 of scope of work , umbrella stand made from 18 mm rubberwood and spray polished , cupboard as per ser 12 of scope of work , sofa set 3 seater 1 plus 1 plus 1 seater , climate controll device capacity 1.5 ton with stabilizer stand and other , zebra roller blind 06 nos window , wiring with 4 sq wire and casing for 03 nos ac with switch socket

CTN :39674334

02 Apr, 2025 NA

Pune - Maharashtra

Tender For supply of rotational moulded polyethylene water storage tanks as per is 12701 (q3) , commercial cpvc pipe fittings (q3) , commercial upvc fittings (q3) , wire mess stainless steel wire cloth 0 point 34mm nominal dia of wire and average width aperature 1 point 60mm and fixed with stainless steel wire stapples 15 mtrs in each roll as per sample , upvc pipe 20mm , upvc pipe 25mm , upvc pipe 15mm , wire mesh aluminum wire cloth 0 point 34mm nominal dia of wire and average width aperature 1 point 60mm and fixed with aluminum wire stapples 15 mtrs in each roll as per sample , upvc tee 25mm , glass pane plain 4mm thick , fancy type powder coated curtian brackets as per sample , glass pane frosted 4mm thick make modiguard , upvc brass socket male 20mm , upvc brass socket female 20mm , upvc tee 20mm , glass corrner shelve with cp bracket 10 inch x 10 inch x 8 mm , upvc brass socket female 15mm , upvc brass socket male 15mm , cpvc brass socket male 20mm , ewc with s trap , sliding door bolt 250mm brass isi mark , ewc with p trap , glass pane plain 3mm thick , glass pane pin headed 4mm , putty gold glazing as per sample , cpvc pipe 20mm , wc indian type with p s trap , tw beading 4 x20 x 2100mm , lock mortice 6 levers bid number/ & ( * ) : gem/2025/b/5815736 dated/ + : 12-03-2025 bid document/ 3 3 1 / 33

CTN :39641966

31 Mar, 2025 NA

Purnia - Bihar

Tender For supply of steel tubes, tubulars and other steel fittings as per is 1239 (part 2 - steel pipe fittings) (q3) , steel pipes for water and sewage as per is 3589 (q3) , alum tower bolt 100 mm long bolt dia 12mm comma barrel dia 13mm , gi nails 3 by 4 inch 20mm , gi nails 2 inch , pvc rawl plug 100 nos pkt , tools kit for trades man , plain glass panes 3 mm thick , wooden beading of size 20mm x 6mm x 8 feet , wooden beading of size size 20mm x 6mm x 20 feet , round plug wooden comma 25 mm , aluminium door stopper 100 mm long with leg , alum bow handle 150 mm rod dia 12 mm , bracket for curtain rod ss , gi screw 20 mm comma 25 mm comma 35 mm comma 50 mm , haps and staple 100 mm long comma ss , hasp and stapple 75 mm long comma ss , stainless steel wire mesh 0 point 36 mm width of aperature 1 point 40 mm 15 mtr roll , plywood 8 feet x feet x 4 mm thick , screw steel 15 to 75 mm , putty i kg pkt , alumn sheet 0 point 5mm thick comma 1 mtr wide 24 gauge , stainless curtain rod 19 mm dia x 12 ft lenght , super flush strip 100 mm wide 10 mtr long , gate valve 20mm brass , hacksaw blade 25 mm x 300 mm , gate valve 15 mm brass , gate valve 25 mm brass , m seal , water storage tank 1000 ltr isi marked , cp bottle trap for whb 32 mm dia , tank cover pvc for 500 and 1000 ltr capacity with fixing arrangement , brass jumper washer for 15 mm bib tap , gi hook for pipeline , gi check nut 20 mm , gi check nut 25 mm , ms angle bracket for whb , pipe 32 mm dia for l f pvc flush pipe , cement 50 kg opc 43 grade , white cement 1 kg , pad lock 6 lever , drill bit for brick hole 4 mm comma 5 mm comma 6 mm comma 8 mm and 10 mm bid number/ & ( * ) : gem/2025/b/6022003 dated/ + : 10-03-2025 bid document/ 3 3 1 / 68

State Government

CTN :39278115

17 Mar, 2025 NA

Kangra - Himachal Pradesh

Tender For corrigendum : tender for supply of wire gauge shutter - providing red marandi wood wire gauge shutter size 32 inchx79 inch including hinges tower bolt sliding door bolt etc. complete in all respect , steel chokhat , ms wooden screw , ms wooden screw , galvanized msnut bolt round head , ms door handle 6inch , ms tower bolt 8 inch , sliding bolt 300mm , door spring , aluminium sheet 28 gauge sheet , takora triangular file , ms nails without heads 0.75 inch , ms nails 2.5 inch , ms nails 2 inch , ms nails 1.5 inch , ms nails 1 inch , black tack nails 0.75 inch , gi wire mesh 24 gauge x 12 mesh , scrapper 5 inch , bit 6mm for concrete , plastic tasla , aluminium catcher , bit 6mm for wood , bit 8mm for wood imported , bit 12mm for wood imported , sand paper grit 120 number 9 inchx11 inch , mortise latch and lock with 6 levers

Alluminium Partition Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government