Latest alumina bricks Tenders | Government alumina bricks Tenders

CTN :41314744

10 Oct, 2025 NA

Budgam - Jammu And Kashmir

Tender For bid to ras supply of tiles ceremic 300x300mm , tiles ceremic 400x400mm , tiles ceremic 600x600mm , tiles anti skid 600x600mm , natural m sand find sand free from moisture , load bearing concrete hollow blocks , agg 20 mm , pbs roll , glass putty , synthetic enamel paint colour black , synthetic enamel paint colour white , synthetic enamel paint colour og , synthetic enamel paint colour red , synthetic enamel paint colour blue , synthetic enamel paint colour yellow , synthetic enamel paint colour green , synthetic enamel paint red oxide , paint brush 2 inch , paint brush 3 inch , paint brush 4 inch , thinner , white cement , wood varnish , karandi mason , shovel with wooden handle , gurmala with rubber base , portable drill machine , combination cutting pliers insulated , measuring tape 30 mtr , measuring tape 15 mtr , hack saw frame , hand saw blade , hacksaw blade double end , fawda with wooden handle , iron cutting machine blades , tiles cutter blade , hand cutter machine make bosch , 12 mm thick plywood bwr , looking mirror 600mm x 450mm , looking mirror 480x510mm , fire extinguisher 2 kg , tower bolt 150mm , self taping screw 2 point 5 inch , self taping screw 25mm 1 inch , self taping screw 35mm 1 point 5 inch , self taping screw 50mm 2 inch , self tapping screw 75mm 3 inch , self tapping screw 100mm 4 inch , ply wood 6 feet x 3 feet x 6mm thick , ply wood 6 feet x 3 feet x 12mm thick , nails 1 by 2 inch , nails 1 inch , nails 1 point 5 inch , nails 2 point 5 inch , nails 2 inch , nails 3 inch , nails 4 inch , ms screw 15mm 100 per pkt , ms screw 20mm 100 per pkt , ms screw 25mm 100 per pkt , ms binding wire not less than 0 piont 9mm dia , j hook 8 mm dia and 150mm long , hydraulic door closure make godrej or volo or isi mark , hdpe sheet 400 micron make isi marked , hdpe laminated sand bag of size 75 x 40 cm , door stopper , door locking arrangement , hinges 2 ) /bid number : gem/2025/b/6504045 * /dated: 04-08-2025 & & / bid document 1 / 84 & & ' ' /item category inch 50 mm , door handle steel 8 inch , ppgi sheet 12 feet x 3 feet x 0 point 50mm , cgi sheet 810 x 2410 mm x 8 feet long 0 point 63mm thick , cgi sheet 810 x 3050mm x 10 feet long 0 point 63mm thickness , cgi sheet 810 x 3657mm x 12 feet long, 0 point 63mm thick , cgi sheet 810 x 1830 mm long 0 point 63mm thick 6 feet , silicone gel sealant of 01 pack of 400 gms including applicator gun , fevicol , welding rod , ms tmt bars 10 mm dia conforming to is 1786 1985 , fire extinguisher 1 kg make cease fire or lighter or firebird or firen , wooden ballies of size 10 feet long and 4 inch dia at bottom , punched tape concertina coil 850 mm dia or 18 loops or 3.5 mm core wire , 3 point 0 m long rectangular hollow section rhs of size 66 x 33 x 2 point 90mm , rotational moulded polyethylene water storage tank , brick, common burnt clay building bricks sub class b , long angle iron picket 1 point 8 mtr 6 feet x 50mm x 50mm x6mm , water leveling pipe pvc 1 bdl equal to 30 rm , adjustable spanner 18 inch , pipe wrench 12 inch , screw driver 12 inch with insulated plastic handle , screw driver 8 inch long make taparia or isi mark , door hinges size 4 inch long medium weight steel 100mm , ply wood 8 feet x 4 feet x 8mm thick , cp 3 in 1 mixer hot and cold , heating device kerosene based heating device , ms tmt bars 08 mm dia conforming to is 1786 1985 , ms tmt bars 12 mm dia conforming to is 1786 1985 , nahani trap with jali 110x 110mm , pcc solid blocks 400 mm x 200 mm x 200 mm minimum strength 50kg , acrylic sheet 6 feet x4 feet x4mm , wire cutter 150mm , aluminium ladder 9 steps , hand gloves insulated with two rubber , ppr welding machine 20 to 63 mm cutter and accessories , ply wood 8 feet x 4 feet x 6mm thick , sealing compound grade a , dry distemper , snow white colour european wc with s or p trap concealed of size 650x405x770m with sheet cover , ppgi sheet 10 feet x 3 feet x0 point 50mm , vitreous china urinal pot , agg 40 mm , green fibre sheet 3mm ti

corporations/Associations/Others

CTN :42063030

10 Oct, 2025 1.00 Crore

Kashipur - Uttarakhand

Tender For supply of electric slaughterhouse (for animals) - primary & secondary chamber primary chamber* single chmber furnace of size 4270 mm x 1980 mm x 1820 mm.* plate thickness- 5 to 8 mm.* lining of interior of furnace- 400 mm wall cermaic blanketk, high aluminia refractory brick is-8-1994 line with insulation brick is 2042-2006* operation temperature- 800o c to 1000o c.* top smoke discharge for secondary chamber.* ash removal doors to be provided for ash collection after combustion.* ingtion- automatic.* temperature control- automatic* material loading- front gate- automaticsecondary chamber* operating temperature - 1050o c to 1250o c.* material of construction- mild steel with high aluminia refractory brick is-8-1994 line with insulation brick is 2042-2006.* made from is 2062 grade mild steel materials (or better) duty lined with insulation bricks, refractory bricks, hysil boards.* burner mounting arrangement with refractory burner block.furnace door:furnace door charging & discharging side fabricated from 5mm to 6 mm thickness door opening & closing automatic.ash door:* ash door (with casted cement lining) to remove nonhazardous ash from the chamber.* top inlet bottom smoke discharge for longer gas residence time.* furnace door charging & discharging side fabricated from 5mm to 6 mm thickness.* door opening & closing automatic/manual.refractory:{complete set of refractory shaped bricks for construction electric cremation of i.s. 8 bricks (approx. 1007nos bricks,insulation 4000 nos. refractory slid for construction of flue duct , as required, refractory heat resistant fire clay , ceramic blanket hysil board, asbestos ropes etc. as required for outer side of the furnace shall be constructed by red bricks by sand and cement as mortars and construction of chimney from basement of roof level including painting i.e. bricks portion shall be painted by two coats of red oxide as primer and to coats of synthetic enamel. (a) complete lining & assembling of entire cremation chamber according to standard size with proper arrangement of accommodation of heating elements, resting of dead body with sufficient opening for falling of ashes to the ash chamber & sufficient ventilation for fresh air spraying. (b) complete lining and assembling of entire cremation chamber according to standard size with provision of drawing out aces from the rear side and sufficient ventilation for fresh air injection. complete lining and assembling of entire cremation chamber according to the standard size with provision of air inlet supplying by fresh air blower and arrangement of multi ventilation path for fresh air}. osspl make, thermocouple heat sensor supply & fixing the thermocouple of heat sensing range 0 - 1200 c (cr.-al) sensor housed in s.s 304 casing of dimension 1200 mm long 22 mm od complete encased to and fitted terminal on other and for connection of compensating of 2 cores 0.5 aq. mm cr- al for heat sensing from thermocouple to temperature controller covered with asbestos embedded rope about 50 m length as per direction of eic., f.d. fan/centrifugal air blower with electric motor * supply and delivery at site, installation, testing and commissioing.* of fresh air injection system forced draft fan mild steel.* type: centrifugal.* capacity:- 500 cmh.* pressure:- 220 mmwg.* motor rating:- 2hp (kirloskar/crompton), burner assembly * total 2 nos. of lpg/cng/png fired automatic burner required.* the burner should be provided with comprising diffuser plate/ burner plate, photo cell housing electrodes with holding brackets, solenoid valve, electrodes caps, flexible hose pipes, spary nozzles, oil filter, blower, etc. connected with electric motor (each burner) & in built air regulator.* burners will work on auto on/off as per the set temperature for the combustion chambers.* the in-built bolwer will provide continuous air flow to the burners to prevent demages due to high temperature., supply and fixing of manifold with a p

Central Government/Public Sector

CTN :41853812

15 Oct, 2025 NA

Guna - Madhya Pradesh

Tender For corrigendum : procurement of high density alumina bricks

Central Government/Public Sector

CTN :42073665

13 Oct, 2025 NA

Multi City - Multi State

Tender For supply of brick, fc 9n, dwn: cdb/r-71921 , brick, fire clay, 6n, dwn: cdb/r-71920

Central Government/Public Sector

CTN :41963517

14 Oct, 2025 NA

Bangalore - Karnataka

Tender For supply of item# 1: end arch bricks is-8 standard of size 230mm x115mmx75/69 , item# 2: end arch bricks is - 8 standard size 230mm x 115mm x 75/62 , item# 3: whytheat k cement al2o3 - 60.0% min sio2 - 32.0% max , item# 4: whytheat-a cement al203 -90% min fe203 - 1% max max. grain size - 6mm , item# 5: fire clay mortar (fine variety) al2o3 - 40.0% min fe2o3 - 1.0% max , item# 6: firecrete super firecrete super / ace al2o3 - 70.0% min fe2o3 - 5.00% max , item# 7: is 8 block brick size: 600 mm x 300 mm x 75 mm , item# 8: thermotex cement (1 tin qty= 40 kgs) , item# 9: high tempreture ceramic tube size: 12mm od x 8mm id x 600mm long