Get complete information related to latest Aluminium Blade Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Aluminium Blade Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Aluminium Blade Tenders.
Tender For rewinding of submersible motor, pandf of electrical item such as submersible cables, aluminum cables ete. at village pingore and all other works contingent thereto.
Tender For supply of earth ground loop and ac leakage current tester as per item 1 of attached specification document , twin core cable as per item 2 of attached specificaiton document , aluminum twin core cable asper item 3 of attached specification document , multistrand single core cable as per item 4 of attached specification document , 4 sqmm multistrand cable as per item 5 of attached specification document , 1.5 sqmm single core cable as per item 6 of attached specification documnent , 0.75 sqmm single core cable as per item 7 of attached specification document , electrical insulation mat as per item 8 of attached specification document , led round light as per item 9 of attached specification document , 16a c curve as per item 10 of attached specification document , 32a c curve as per item 11 of attached specification document , 32a c curve 2 pole as per item 12 of attached specification document , 16a c curve 1 pole as per item 13 of attached specification document , barrel hand pump as per item 14 of attached specification document
Tender For supply of supplying of 1.5 tr nominal capacity invertor type metal body , installation, testing and commissioning of of 1.5 tr inverter type ductable air cooled split ac unit as per item no.1 above in equipment room , providing and fixing heavt duty powder coated m s stand of suitable size made out of suitable guage ms shee , supply and fixing of 3 core 2.5 sq mm control cum transmission wiring and ac power supply cable of shielded copper conductor for looping between indoor and outdoor , supply and fixing of 4 core 1.5 sq mm control cum transmission wiring and ac power supply cable of shielded copper conductor for looping between indoor and outdoor , supply installation testing and commissioning including vaccumiazation and nitrogen testing of , supply installation testing and commissioning including vaccumiazation and nitrogen , supplying and fixing of 25 mm sizes of rigid upvc piping from outlet socket of ac unit complete with elbow , supplying and fixing dp sheet steel enclosure on surface or recess along with 25 or 32 a 230 v c curve dp mcb , supplying and fixing 5 amps to 32 amps rating, 240 or 415 volts c curve miniature circuit breaker suitable for inductive load of single pole and neutral , providing and fixing supply air grills of powder coated aluminum construction having a free area of not less than 70 percent without volume control dampers , supplying and installing of 150 mm width 50 mm depth 1.6 mm thickness nominal size of perforated hot dipped galvanised iron cable tray
Tender For supply of upgradation of central substation for es dept at grse main works d d - supply of upgradation of central substation for es dept at grse main works d d - ht copper bus bar , vcbs items , wti,buchholz, oti relays , 3 core x 300 sq. mm. aluminium conductor , pvc hume pipe , new two - 02 nos transformers , 11 kv - e 3 c x 300 sq mm frls xlpe , earth pit item 50 mm dia gi pipe , copper earth plate for neutral earthing , 50 x 6 mm cu flat , 50 x 6 mm gi flat , 2 v 100 ah ni-cd battery , 110 v dc rectifier , buchholz, wti, oti relays for 1k kva transformer , hv cable route marker , mapping of existing cable and pipe lines , civil work for preparation of renovation , position of 06 vcb racks , ht copper bus bar , installation and proving of wti, buchholz, , repair of vcb enclosures , 3 core x 300 sq. mm. aluminum conductor , trench cutting for cable laying , charge for laying of hume pipe , removal of 02 nos. transformer - 1000 kva and position of 02 nos. new transformer , ht cables , earth pit connection , installation of batteries , removal of existing ht panel. , service for removal of existing panel , service for fitment and proving of buchholz, wti, oti relays for 1000 kva transformer , cea approval for new vcb panel and ht cable installations ) /bid number : gem/2025/b/6602235 * /dated: 23-08-2025 & & / bid document 1 / 40
Tender For supply of repair oblice maintenance of boat assault universal type ia 10 nos at ge ep jodhpur , removing from stack arranging on ground for removal oblice fixing of items oblice parts oblice rivets etc and re stacking after painting oblice checking of boats 10 nos , s and f of special aluminum alloy sheets strips and plates as per is 737 and 736 designation 53000 h2 , s and f of special aluminum alloy rivets as per is 740 designation 53000 o , s and f of special aluminum alloy extruded round tube and hollow sections as per is 1285 type 64430 wp , s and f of special screw as per is 1365 and is 1366 , s and f of chain ms as per specification no ind oblice gs oblice 1323 oblice least qty per rm , s and f superior epoxy solution , required thinner , required olive green metal paint make berger oblice nerolac oblice shalimar oblice equal , required smooth marine paint make akzo noble paint oblice equal , numbering and naming of item part with white metal paint 01 full skilled painter per 10 nos for 02 coats of white paint for marking 1250 per labour per day , requirement of crane on per day bases , applying 03 coats of paint 04 labour per boat per day 950
Tender For corrigendum : supply of lighting material aviation lights and its spares - teknic make 22.5mm indicating lights in 220/ 250 vdc, red colour, item code-p2plbr4l, teknic make 22.5mm indicating lights in 220/ 250 vdc, green colour, item code-p2plbr3l, teknic make 22.5mm indicating lights in 220/ 250 vdc, yellow colour, item code-p2plbr8l, teknic make 22.5mm indicating lights in 220/ 250 vdc, blue colour, item code-p2plbr6l, teknic make 22.5mm indicating lights in 220/ 250 vdc, ambef colour, item code-p2plbr5l, teknic make 22.5mm indicating lights in 220/ 250 vdc, white colour, item code-p2plbr1l(s), teknic make 22.5mm indicating lights in 220/ 250 vdc, clear colour, item code-p2plbr7l (s), powder coated ms junction box with front cover & lock arrangement. suitable for mounting on street lighting pole with mounting clamp. junction box should be supplied with factory fitted aluminum busbar for r, y, b & n with support insulator.size-300 x 200 x 125mm (lx w xd),is: ip-44 or latest as per is 13947 or the lates version thereof.voltage rating-440v ac/ 40a. cable entry-one way with two no. of holes in the bottom side., led flood light 75w-80w with system lumen minimum 10000im: ip-65 or above cri>70, pf-.095, cct=5700-6000k, thd10% operating voltage-110-300v, led chip-lumiled, nicia cree osram, samsung, everlite make, g/w-minimum 3 years, led well glass 35w-40w : with system lumen minimum 4000im: ip-65 or above cri>70, pf-.095, cct=5700-6000k, thd10% operating voltage-110-300v, led chip-lumiled, nicia cree osram, samsung, everlite make, g/w-minimum 3 years, led flood light 190w-200w lumen 22000: ip-65 or above cri>70, pf-.095, cct=5700-6000k, thd10% operating voltage-110-300v, led chip-lumiled, nicia cree osram, samsung, everlite make, g/w-minimum 3 years, medium intensity aviation led light230v ac, red colour,intensity -2000-2000cdillumination-360 degree uniform with in built surge protection, lamp fitting, item name: high intensity aviation obstruction light fitting with led, type of lamp:led, voltage rating:240v ac +/- 10%, power rating: not available, additional information: high intensity aviation warning light, flashing, leds: smd high power leds with 100k burning hours life expectancy lens, protection for light control panel having following features: digital flasher card, surge protection synchronization through master controller alarm for lamp failure via potential free contact, change of mode: through photo controller, intensity: day- 200000 cd 25%, twilight-20000 cd 25%, night-2000 25%, ip65, make- avionics, biney, avaids, geltronix instapower, aviation power only, low intensity aviation warning light conforming to icao regulations with led for red light output operations in night with the below features: intensity: 32cd ingress protection: ip 65 protection pcb: metal core pcbs for full heat transfer from led junction, lens: borosilicate glass lens for reduced sandblasting, body: full aluminium body lm06 for proper heat dissipation dusk to dawn operation of the lights will be done by photocell head alarm for lamp, make- avionics, biney, avaids, geltronixinstapower, aviation power only., lamp fitting spares, item name:photo cell head equipment:cooling tower aviation lamp fitting, type of lamp:led, voltage rating:2kv ac, power rating:550 w, make- avionics, biney, avaids, geltronixinstapower, aviation power only, lamp fitting spares, item name: communication box, equipment:high intensity discharge light, type of lamp: xenon, power rating: not, available, make: aviads technovators private limited or equivalent, model:tass-hi-xe-dn (fhu), additional information:with all standard accessories., electrical miscellaneous, item name: complete master control panel, voltage rating:230vac, current rating: not available, additional information: for medium & low intensity aviation obstruction light, with flash controller, photo cell head & other related accessories.
Tender For supply of item 1mini cam vise hss plus left part no. csm1062a11 as technical specification annexure attached , item 2 mini cam vise hss plus right part no. csm1061a11 as technical specification annexure attached , item 3 coolant jet 11 by 4 inch link hose part no. cb12004a00 as technical specification annexure attached , item 4 low concentration diamond blade 100mm x 12.7mm x 0.3mm part no. m412l as technical specification annexure attached , item 5 dressing stick part no. ds hyphen 10 as technical specification annexure attached , item 6 hose assembly part no. psm1008a11 as technical specification annexure attached , item 7 bearing house assembly part no. psm1010a11 as technical specification annexure attached , item 8 8 inches sic paper with psa 220 grit part no. ea004 as technical specification annexure attached , item 9 8 inches sic paper with psa 320 grit part no ea005 as technical specification annexure attached , item 10 8 inches sic paper with psa 400 grit part no. ea006 as technical specification annexure attached , item 11 8 inches sic paper with psa 600 grit part no. ea007 as technical specification annexure attached , item 12 8 inches sic paper with psa 800 grit part no. ea008 as technical specification annexure attached , item 13 8 inches sic paper with psa 1000 grit part no. ea009 as technical specification annexure attached , item 14 8 inches sic paper with psa 1200 grit part no. ea010 as technical specification annexure attached , item 15 8 inches sic paper with psa 1500 grit part no. ea011 as technical specification annexure attached , item 16 8 inches sic paper with psa 2000 grit part no. ea012 as technical specification annexure attached , item 17 magnetic disc 8 inches part no. tmgd801 as technical specification annexure attached , item 18 magnetic disc 10 inches part no. tmgd802 as technical specification annexure attached , item 19 aluminum disc 8 inches part no. pc02015a33 as technical specification annexure attached , item 20 cold mold set 11 by 4 inches part no. m158 as technical specification annexure attached , item 21 cold mold set 11 by 2 inches part no. m159 as technical specification annexure attached , item 22 diamond paste 1 micron part no. dp001 as technical specification annexure attached , item 23 diamond paste 3 microns part no. dp002 as technical specification annexure attached , item 24 aerosol spray 200 ml part no. dl001 as technical specification annexure attached , item 25 polishing cloth 1 micron with psa part no. lp003 as technical specification annexure attached , item 26 polishing cloth 3 microns with psa part no. lp001 as technical specification annexure attached , item 27 aluminum powder 0.05 mic in 455g bottle part no. m300 as technical specification annexure attached , item 28 aluminum powder 0.3 mic in 455g bottle part no. m302 as technical specification annexure attached , item 29 aluminum powder 1 mic in 455g bottle part no. m302 as technical specification annexure attached , item 30 diamond embedded disc 8 inches 220 grit part no. cm506 slash 8y as technical specification annexure attached , item 31 bulk adapter as technical specification annexure attached , item 32 cast iron disc 8 inches as technical specification annexure attached , item 33 ferromagnetic carrier sheets 8 inches part no tmgdf801 as technical specification annexure attached , item 34 ferromagnetic carrier sheets 10 inches part no. tmgdf802 as technical specification annexure attached //bid details 2 / 24 specification annexure attached
Tender For supply of procurement of disposable item e e - tissue paper , tooth pick , disposable tea glass , disposable water glass , sugarcane disposable plate big size , disposable plate medium size , disposable plate small size , disposable spoon wooden , disposable bowl medium , disposable bowl small , aluminum packing material with cover , butter paper 100 mtr