Latest aluminium boom Tenders | Government aluminium boom Tenders

corporations/Associations/Others

CTN :39970467

23 Apr, 2025 18.00 Lacs

Porbandar - Gujarat

Tender For annual rate contract for supplying of electric material for the fiscal year (year 25-26) - providing mains with 1.1 kv grade frls pvc insulated isi marked stranded alluminum conductor wire. standard company like, havells, finolex, kei, rr kebel, polycab, etc. (4mm isi alluminum wire), providing mains with 1.1 kv grade frls pvc insulated isi marked stranded alluminum conductor wire. standard company like, havells, finolex, kei, rr kebel, polycab, etc. (6mm isi alluminum wire), fuse with isi standard (copper part) 63 amp, fuse with isi standard (copper part) 100 amp, fuse with isi standard (copper part) 200 amp, supplying led street light / flood light fittings with high power white leds wattage of 1watt and above assembled on single mcpcb, efficiency more than 130 lm/w and corrosion free high pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300v, power factor more than 0.95, thd 0.45, luminaire efficacy > 100 lumens/watt. led driver efficiency > 85 percentage. cree / osram / philips lumileds / nichia / seoul/ bridgelux (u.s.a.) make led used for luminaire. (fittings required lm-79 & lm-80 certificates) (note: below description have shown ranges of wattage capacity of led fittings. the engineer incharge may select any wattage capacity between the ranges shown.) (20 watt), supplying led street light / flood light fittings with high power white leds wattage of 1watt and above assembled on single mcpcb, efficiency more than 130 lm/w and corrosion free high pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300 v, power factor more than 0.95, thd 0.45, luminaire efficacy> 100 lumens/watt. led driver efficiency > 85 percentage. cree / osram / philips lumileds / nichia /seoul/ bridgelux (u.s.a.) make led used for luminaire. (fittings required lm-79 & lm-80 certificates) (note: below description have shown ranges of wattage capacity of led fittings. the engineer incharge may select any wattage capacity between the ranges shown.) (24 watt), supplying led street light / flood light fittings with high power white leds wattage of 1watt and above assembled on single mcpcb, efficiency more than 130 lm/w and corrosion free high pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and polycarbonate optics/ lenses with company mark/name engraved or embossed 120 to 300v, power factor more than 0.95, thd0.45, luminaire efficacy> 100 lumens/watt. led driver efficiency>85 percentage. cree / osram / philips lumileds / nichia / seoul/ bridgelux (u.s.a.) make led used for luminaire. (fittings required lm-79 & lm-80 certificates) (note: below description have shown ranges of wattage capacity of led fittings. the engineer incharge may select any wattage capacity between the ranges shown.) (30 watt), supplying electrical insulation l.t. tape role with isi marked having nominal width 1.8 mm nominal length 9.0 mtr nominal thickness 0.125 mm and having self adhesive pvc. any colour, street light driver 20 watt, street light driver 35 watt, street light driver 30 watt

CTN :39952770

22 Apr, 2025 8.20 Lacs

Shivpuri - Madhya Pradesh

Tender For boom barrier supply and installation work - barrier gate-model - sp bb 4006m4sled (electro mechanical, motorised with 6 meter boom (aluminum hollow section 100x44mm) open time 4 sec / right installed/ 2 nos remote/ 1200 times per day, steel housing box with led, support stand, control pcb)barrier dimension- 920 h x 285 d x 335 wboom length- 6000 mm

Central Government/Public Sector

CTN :39965988

28 Apr, 2025 NA

Rewa - Madhya Pradesh

Tender For supply of 1 inch square drive torque wrench (dremometer), made in single peace, having aluminum all oy housing provided with 02 extension tubes. range 750-2000 nm ,length:- 2300-2400mm with 02 extensi on , single scale having increments of 50 nm, approx. weight : 12.0 kg as per gedore code no. 7695250 , supplier along with 1 inch square drive ratchet mechanism gedore model no. 8564-01e. material has to be procure from oem or its authorized dealer. make gedor/facon/shap- on or equivalent firms. [ warranty pe riod: 30 months after the date of delivery ]

State Government

CTN :39924307

19 Apr, 2025 22.23 Lacs

Jalandhar - Punjab

Tender For supplying and installation of furniture for 4 no. temporary courts at existing judicial courts complex jalandhar - judges - main chair for court & retiring room - providing, supplying and placing of high back chair for dias / retiring room . seat/back assembly: the cushioned seat assembly consshould be ts of seat outer (material-30% glass fiber nylon)& upholstered seat inner (material- poly propylene) with moulded polyurethane foam & polyster fabric. the net back should be made up of back outer (material-glass fiber filled nylon)& back inner (material- pp) and upholstered using polyester mesh fabric with high tenacity yarn. full back size: 46.5 cm. (w) x 60.0 cm. (h)seat size : 51.0 cm. (w) x 49.0 cm. (d)high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density = 45 +/- 2 kg/m and hardness load 12 +/- 2 kgf for 25% compression.back spine: the support spine should be made up of high pressure die cast polished hed aluminum.armrests : the armrest should be having two adjustment, height (6.0 0.5cm) and depth (6.0 0.5cm). height adjustment should be provided in aluminum structure of armrest which should be connected to aluminum back spine and should be operated by button. the depth adjustment should be provided in pad which should be fixed to armrest structure. armrest top should be made up of pu molded over plastic inner.active bio-synchro mechanism: the adjustable tilting mechanism should be designed with the following features: 360 revolving type front-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfort tilt tension adjustment can be operated in seating position 5 position tilt limiter giving option of variable tilt angle to the chair seat / back tilting ratio of 1:2 the mechanism housing should be made up of hpdc aluminum & black powder coated (dft 40 to 60 micron)seat depth adjustment: seat depth adjustment should be integrated in the seat through a sliding mechanism. seat depth adjustment range should be of 3.75 0.1 cmlumbar support assembly: the lumbar support assembly should consist of lumbar spine (material-glass fiber filled nylon) which should be fixed to aluminum back spine. the lumbar pad (material- poly propylene) should be fixed to lumbar spine through lumbar pad support. lumbar support assembly has height adjustment of 5.0 0.5cm.pneumatic height adjustment: the pneumatic height adjustment has an adjustment stroke of 10.0 0.3cm.pedestal assembly with castors:the pedestal should be high pressure die cast polished aluminum and fitted with 5 nos. twin wheel castors. the pedestal should be 65.0 0.5cm. pitch-center dia.(75.0 1.0cm. with castors.)headrest :the neckrest assembly consshould be ts of upholstered neckrest inner(material-polypropylene) with moulded polyurethane foam and polyster fabric.upholstered inner should be fixed to neckrest cover.neckrest should be fixed to back assembly through neckrest spine .neckrest assembly has height adjustment of 5.5 +/- 0.5cm and rotation adjustment of overall 20 +/- 2 .twin wheel castors: the twin wheel castors should be injection moulded in black pp having 6.0 0.1cm wheel diameter.overall dimensions of chairseat height - min 45.5 to max 55.5cm, reader / steno chair: providing, supplying and placing of mid back chair reader /steno chair . seat/back assembly: the cushioned seat assembly consshould be ts of seat outer (material-30% glass fiber nylon)& upholstered seat inner (material- poly propylene) with moulded polyurethane foam & polyster fabric. the net back should be made up of back outer (material-glass fiber filled nylon)& back inner (material- pp) and upholstered using polyester mesh fabric with high tenacity yarn. mid back size: 36.5 cm. (w) x 55.0 cm. (h)seat size : 51.0 cm. (w) x 49.0 cm. (d)high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density = 45 +/- 2 kg/m and hardness load 12 +/- 2 kgf for 25% compression.back

CTN :39899301

18 Apr, 2025 2.00 Lacs

Kulgam - Jammu And Kashmir

Tender For supply of line workshop material item wise as and when required during the financial year 2025-26. - electrical store/workshop items/: as per is standards, bush rods 12mm(lt) of standard make, bush rods 19mm(lt) of standard make, bush rods 25mm(lt) of standard make, bush rods 30mm(lt) of standard make, ht bush for dts of standard make, lt bush set for 250kva dt of standard make, lt bush set for 63kva dt of standard make, lt bush set for 100kva of standard make, pp rope of sizes, aluminum thimbles 95/120sqmm of standard make, aluminum thimbles 185sqmm of standard make, aluminum thimbles 240sqmm of standard make, aluminum thimbles 300sqmm of standard make, plastic meter seals, soldress clamp for 400kva of standard make, soldress clamp for 250kva of standard make, soldress clamp for 100kva & 63kva, gi channel/angle/flat of sizes including clamps, gi v cross-arm with top bracket including clamp(2 nos), 11 kv gapless surge arrestor,9 kv ,10 ka ,la with polymer housing, stn. type, 11kv go, ab switch 3-phase, 3-pole, 200 amp, vertical type, 11 kv horn gap fuse set 3 phase 200a, 11 kv heavy duty link set (polymer) line type with 6mm copper blade and 02 no. 8ft. gi channel, clamps and nuts and bolts, 11 kv pin insulators (polymer/porcelain) with pins(5kn), 11kv polymeric composite disc insulator 12kv,min failing load 45kn, lighting impulse 75kv positive and 80kv negative, creepage distance 320mm, lt shackle with mukhi clamps including gi nuts & bolts, rechargeable 5w emergency search light, high power with 3000mah lithium battery, and an ergonomic design, gi nuts & bolts of sizes with full thread, manilla rope, gi wire 8swg, suspension/tension clamp with eye hook, insulating piercing connector (10-95sqmm), straight through cable jointing kit for 50sqmm ltab, straight through cable jointing kit for 120sqmm ltab, heat shrinkable outdoor cable termination kit, 50sqmm ltab cable (3x50+1x16+1x35) sqmm xlpe (1.1kv, 3+1c, al), 35 mm ab (ht) cable (3x35+1x35 mm ) xlpe, led fancy decoration mala light (12m long) (orange+white+green), dpc aluminium of sizes 13/14/16/18swg of standard make, super enamelled(se) of sizes 13/14/16/18/21swg of standard make, lathoride paper 10 mil of standard make, exchange of 1kg fresh al dpc by scrap dpc, exchane of 1 kg fresh bush rods by scrap bush rods, lathoride paper 20 mil of standard make, ht paper 3 mil of standard make, hard card board 1/1.5/2/3mm of standard make, fiber tubes of standard make, cotton tape/ nawar of standard make, cork washers (32x12)5mm, cork washers (50x28)5mm, cork washers (110x74)5mm, cork washers (45x20)5mm, cork washers (60x32)5mm, cork washers (70x45)5mm, cork washers (90x50)5mm, cork sheets(24x36) 3 mm, cork sheets(24x36) 4mm, cork sheets(24x36) 5mm, cork strip(40x3) mm, cork strip(40x5) mm, oil seals for 250kva of standard make, oil seals for 100kva & 63kva of standard make, m seal, cotton tap 1" size (length 35 meter), nawar tap 1 size 35 meter long, tap roll pvc, old saree/doti cloth, insulating gum of standard make, aluminum strip of sizes (3/6, 3/7, 4/8, 4/10 mm etc ) of standard make, rubberized cork sheet 4mm thick, 2 feet *3 feet, rubberized cork sheet 3mm thick, 2 feet *3 feet, ht brown paper 3.0/2.5 mil, packing sheet (1mm)press card board 1/2/3mm, synthetic enamel paint grey colour, varnish dr.beck/empire, glass wool sleeves of sizes, fevicol, backlite tubes 1/2 inch,(1mtr length), packing gutties, electrical grade kraft paper,4mil, rubber washers ( m-12 ht oil seal),, rubber washers ( m-12 lt oil seal),, rubber washers ( m-16 lt oil seal),, rubber washers ( m-20 lt oil seal),, rubber washers ( m-25 lt oil seal),, rubber washers ( m-30 lt oil seal),, fiber glass sleeves 2mm, fiber glass sleeves 3mm, fiber glass sleeves 4mm, fiber glass sleeves 5mm, fiber glass sleeves 6mm, fiber glass sleeves 8mm, fiber glass sleeves 10mm, fiber glass sleeves 12mm, fiber glass sleeves 15mm, oxygen cylinder for welding with water capacity of 47 ltrs and gas capacity of 7 c

Central Government/Public Sector

CTN :39851518

15 Apr, 2025 NA

Mandal - Gujarat

Tender For supply of ammonia compressor spares> - crank shaft assembly complete (part no.340.03.001.50 ), bearing bush (std) pump end (part no.082.28.050.50 ), thrust ring bronze (part no. 336.02.004.50 ), thrust ring steel (part no.336.03.005.50 ), driving plate (part no. 082.28.060.50), retaining plate assembly (part no. 336.14.114.50), bearing bush (std) drive end (part no.336.02.003.50 ), connecting rod bolt (part no. 082.04.040.51), bearing intermediate half (std) (part no.086.15.030.50 ), shaft seal (part no.082.08.000.50 ), piston assembly (part no.082.03.000.50 ), plate safety (piston) (part no.082.03.040.50 ), set of piston rings (part no.082.03.150.50 ), big end bearing half std (part no.082.04.030.50 ), gudgeon pin (part no.082.03.020.50 ), connecting rod with bolt (part no.082.04.070.50 ), delivery valve assembly (part no. 336.12.003.50), suction valve spring (part no.336.12.001.50 ), suction valve ring (part no.082.28.130.50 ), suction stroke limiter (part no. 336.12.002.51), cup spring (part no. 336.12.011.50), cylinder liner assembly (part no.336.04.000.50 ), cylinder liner(part no. 336.04.001.51), safety plate (connecting rod) (part no. 082.04.050.50), unloader piston assembly (part no. 336.05.007.50), oil pump assembly (part no. 082.07.000.50), filter wire gauge (part no. 336.10.009.50), paper filter (part no.351.09.014.50 ), suction filter assembly (part no. 336.10.023.50), discharge filter assembly (part no.336.10.031.50 ), tah-8 valve assembly (part no. 351.09.003.50), hex nut (connecting rod nut) (part no. 082. 04. 100 .51), spring (vld piston) (part no.336. 05 .002 .50 ), kit delivery valve ring and springs (part no.085.28.08 ), teflon ring (vld piston) (part no. 336.05.006.50), spring (oil regulator) (part no.082.09.020.50 ), oil level glass (part no.082. 28. 170. 50 ), ball dia 16 (part no. 999. 30 .785. 50), k5 valves (part no. 082. 16.001. 50), stud (short) m16 x35 (part no. 999.03.700.50), stud (long) m16 x65 (part no.999.03.710.50 ), hexagonal hd screw m16x35 (part no. 999.01.690.50), set of safety valve parts (part no.336.13.00 ), kit gasket/ o rings/ all packing for kc-9 compressor (part no. 852801), kit oil pump gear (part no. 0852805), kit liner parts(part no.0852810 ), kit-shaft seal o ring (part no.0852804 ), intermediate bearing assembly (part no.086.15.040.50 ), hex nut m16 (head cover) (part no. 999.06.687.50), bearing cover assembly drive end (part no.336.02.001.50 ), bearing cover assembly pump end (part no.082.02.001.50 ), stud for bearing cover m12 x 125l (part no. 999.03.688.50), stud for bearing cover m12 x 100l (part no. 999.03.683.50), hex nut m12 (part no.999.06.650.50), solenoid valves for kc-9 compressor (part no. 082.25.030.50), key for flywheel / shaft key (part no.082.28.191.50 ), fly wheel / compressor pulley - kc 9 (part no.350.01.033.50), oil return valve (part no. 082.06.000.50), kc buffer springs (part no.080.04.020.50 ), gudgeon pin bush (part no.082.04.020.50 ), piston (part no.080.03.110.50 ), gasket kpgm 3/b (head gasket) (part no.082.28.670.50 ), ring teflon (safety valve) (part no.336.13.002.50 ), aluminum packing set (part no. 082.19.003.50), o-ring set for kc-09 (part no.080.19.005.50 ), gasket set (part no.080.19.001.50 ), gasket round flange 150 nb (part no. 993.00.311.00), hex. head bolt m 10 x 70 (part no. 999.01.655.50 ), housing for piston (part no. 082.10.090.51), shaft seal cover (part no.082.28.160.50 ), spring (leaver) (part no.082.10.050.50 ), springs (oil filter) (part no.336.10.006.50 ), springs (suction filter) (part no.082.12.040.50 ), spring (vld) (part no. 336.05.002.50), curtation spring (part no.082.100.080.50 ), set of pistons & springs (oil pump) (part no. 820706 to 820715), cranck case heater (part no.082.26.173.50 ), ferrule (part no.999.16.001.50 ), union nut (part no. 999.16.063.50), top housing assembly suction (part no.336.10.035.50 ), top housing assembly discharge (part no.336.10.036.50 ), reducing nipple (part no.336.14.111.50 ), ferrule (pa

Aluminium Boom Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

State Government

Central Government/Public Sector