Latest aluminium bottle Tenders | Government aluminium bottle Tenders

CTN :42917362

11 Dec, 2025 NA

Ranga Reddy-T - Telangana

Tender For bid to ras supply of plate rack c c--chlorinated polyvinyl chloride (cpvc) pipes for potable hot and cold water distribution supplies (v2) as per is 15778 (q3) , waste fittings for washbasin and sinks as per is 2963 (q3) , hydraulically regulated door closers (q3) , floor drain traps (q3) , stainless steel sinks for domestic purposes (v3) as per is 13983 (q2) , plastics bib taps pillar taps angle valves and stop valves as per is 9763:2000 (latest) (q3) , towel rail / ring for bathroom (q3) , connection pipe with nuts (v2) (q3) , m - seal as per is 9197 (q3) , ptmt tap fitting (q3) , hasps and staples as per is 363 (q3) , stainless steel butt hinges as per is 12817 (q3) , pvc gitti (q3) , curtain pipe, sider and mounting bracket (q4) , urinal bowls as per is 2556 (part 6) (q3) , towel rail / ring / rack / hooks for bathroom (q3) , teflon tape , stainless steel grating , grating dome , ptmt waste coupling , ptmt grating round , ptmt pillar cock fancy , ptmt bib cock fancy , cp brasstoilet paper , brass spindle , ptmt jet spray , ptmt alloy cabinet mirror , mirror cabinet , corner glass shelf , glass shelf , ptmt float valve , pvc sink waste coupling , pvc internal fitting for low level cistern , cp brass jet spray , urinal waste pipe , pvc urinal waste pipe , pvc waste pipe , corrugated waste pipe , cp brass waste coupling , stainless steel plate rack , door handle aluminum , bow handle aluminium , stainless steel bow handle , door stopper , stainless steel handle , ms sliding door bolt , ss sliding door bolt , tower bolt stainless steel , sliding door bolt aluminum , decorative poweder coated bracket , float glass , frosted glass , glass pane , glass pin headed , looking mirror , mirror for bathroo , looking marrior , opc , ms helical spring door closer , paint brush , black screws , mix sizes of ms wire nails , oil putty , rubber-based adhesives , solvant cement , silicon sealant , hessian based bituminous waterproofing membrane i , mirror for bathroom , aluminium plain sheets , gi nipple 20mm size , emery cloth , laminated sheets , ptmt stop cock 20mm . , paint , obd , turpentine oil , thinner , letter writing brush , ss waste coupling , water based wall primer , pvc waste pipe for sink , plastic seat cover , brass waste coupling , white portland cement //bid details2 / 129

State Government

CTN :42880238

10 Dec, 2025 99.85 Lacs

Bagalkot - Karnataka

Tender For corrigendum : tender for supply of furniture, t&p and safety materials for utilization operation division bagalkot, tlm s/d bagalkote and zonal office coming under operation zone kptcl bagalkote conforming to our technical specifications, f.o.r.d at store/site including insurance and transportation and un-loading. - nylon rope 1inch dia, nylon rope 3/4inches dia, polypropyline rope of 32 mm dia in kg, polypropyline rope of 26 mm dia in kg, hi visibility reflective jacket, telescopic ladder aluminium 6 m height, insulation tester (megger) 2.5 kv - 5 kv, head torch, hydraulic crimping tool manual with suitable dies for crimping lugs of size upto 400 sqmm set), electrical safety helmet attached with electronic induction tester, grounding sticks extendable upto 18 ft, safety belt, minimum 2 m rope length, folding steel table (8feet length &2 feet width ) with carrying handle and suitable muticolour cutains, chain saw (motorised), extremely robust and long lasting chain saw. highly suitably for cutting firewood, thinning shrubs and bushes and shaping trees, telescopic earthing rod, chain pulley block 2 ton capacity, sf6 gas filled in 25 kg cylinders (including non returnable carbon steel cylinders), sf6 gas filled in 50 kg cylinders (including non returnable carbon steel cylinders), binocular pentax 10 x 43mm lens, four sheave pulley with ball bearing 5 ton capacity, hydraulic cutter upto drake acsr with bits for cutting, highbeam torch, portable tool box, safety helmet with ratchet and headlamp, double sheave pulley block 10.2cm dia (open type) 5 ton capacity (light weight), single sheave pulley block 10.2cm dia (open type) 3 ton capacity (light weight), aluminum ladder 3 mtrs length with 8mm frp gauge thickness (heavy duty), aluminum ladder 6 mtrs length with 8mm frp guage thickness (heavy duty), xerox machine, insulated gos operating handle/rod for redesigned & modified gos, frp telescopic discharge rod 16 ft, hi visibility reflective rain wear, rubber hand gloves 33 kv, rubber hand gloves 15 kv, good quality heavy duty computer table, printer cum xerox cum scanner, office metal rack, good quality heavy duty steel almirah, good quality heavy duty computer chairs, good quality heavy duty s type full armed netted chairs medium back non rotatable & non foldable, branded plastic arm chairs, officers tables with draw, supply of good quality heavy duty office table, supply of good quality heavy duty metal rack, supply of good quality heavy duty office executive revolving chair ( high back with five legged ms fabricated revolving heavy guage base with twin wheel castors, with adjustable height & back tilt with fabric un-pholstered cushioned seat & mesh back rest, with adjustable armrest - nylon rope 1inch dia, nylon rope 3/4inches dia, polypropyline rope of 32 mm dia in kg, polypropyline rope of 26 mm dia in kg, hi visibility reflective jacket, telescopic ladder aluminium 6 m height, insulation tester (megger) 2.5 kv - 5 kv, head torch, hydraulic crimping tool manual with suitable dies for crimping lugs of size upto 400 sqmm set), electrical safety helmet attached with electronic induction tester, grounding sticks extendable upto 18 ft, safety belt, minimum 2 m rope length, folding steel table (8feet length &2 feet width ) with carrying handle and suitable muticolour cutains, chain saw (motorised), extremely robust and long lasting chain saw. highly suitably for cutting firewood, thinning shrubs and bushes and shaping trees, telescopic earthing rod, chain pulley block 2 ton capacity, sf6 gas filled in 25 kg cylinders (including non returnable carbon steel cylinders), sf6 gas filled in 50 kg cylinders (including non returnable carbon steel cylinders), binocular pentax 10 x 43mm lens, four sheave pulley with ball bearing 5 ton capacity, hydraulic cutter upto drake acsr with bits for cutting, highbeam torch, portable tool box, safety helmet with ratchet and headlamp, double sheave pulley block 10.2cm dia (open

Central Government/Public Sector

CTN :43065145

26 Dec, 2025 1.61 Lacs

Jhunjhunu - Rajasthan

Tender For supply of material required for civil department c c - pvc waste pipe with coupling 32 mm , pvc waste pipe with coupling 40 mm , p. v. c. rigid pipe confirming to is 4985-1981 75mm odx5mm thk , p. v. c connection breaded pipe 1by2 inches dia , p. v. c washer 15 m. m diameter , solid plastic seat with lead for european type commode , 15 mm brass ball valve comp. 15mm 5by8inch , c. p. angle valve 1by2inches 150 gm , c. p. pillar cock for washbasion , bib cock c. p 1by2inches min weight 300 gm , stop cock made of cast brass , stop cock c. p. 1by2inches min 320 gm , hand operated c. p. water jet. length 1. 5 meter , c. p. two-in-one wash-basin mixer conforming to is standards , c. p. three-in-one bathroom mixer conforming to is standards , ball valve brass 1inches min weight 350 gm , g. i. socket heavy duty both end threaded confirming to is-1239 1964 1by2 inch , g. i. nipple medium duty 1by2inchesx6inches , reducer g. i. heavy duty 1inchesx3by4inches , reducer g. i. heavy duty 3by4inchesx1by2 inches , elbow g. i. medium duty 1by2inches x 90 degree , elbow g. i. medium duty 3by4inches x 90 degree , plug g. i. 1by2inches , plug g. i. 3by4inches , tee g. i. heavy duty 3by4inchesx3by4inchesx1by2inches , union g. i heavy duty 3by4inches , reducer g. i. heavy duty 1inchesx1by2inches , elbow g. i. heavy duty 1inchesx 90 degree , elbow g. i. medium duty 1by2inches x 90 degree , g. i. pipe nipple with standard thread length on both ends 1inches , g. i nipple medium duty 3by4inches x 6inches , g. i. union standard length , heavy duty, size, 1inches , g. i. socket heavy duty both end threaded confirming to is-1239 1964 1 inch , wash hand basin 550. mmx400mm , cp towel rail with bracket 3by4inchesx30inches , cast iron bracket for wash basin-550 mm length , cloth hanger ss 1. 5 ft 6 pin , m. s. handle of size 100 mm , m. s butt hinge for rcc stone door frames , m. s. tower bolt black coloured , tower bolt m. s. 1by2inchesx4inches , m s screw wood counter sunk head black bsw 1. 1by2inches , m. s. round head screw 6. mm x 30. mm , plastic wall plug gitti 1. 5 inch , oxidised m. s eldrop 300x16 mm , iron wire nails rose head 1inches x 14 gauge , iron wire nails rose head 1. 1by2inches x 17 gauge , iron wire nails rose head 2inches x 10 gauge , teflon tape 3by4 inch cotton , measuring tape made of steel 5 mtr , measuring tape made of steel 15 mtr , commercial ply 6 mm thick , hydraulic auto door closer isi marked , white cement , glass window putty , glass self 24inchesx5inches aluminum frame with 3 mm glass plate , m seal appoxy 60 gm packets , door and windows mosquotoes s. s wiremesh. wire dia 0. 2 mm

CTN :43054300

25 Dec, 2025 5.00 Lacs

Belgaum - Karnataka

Tender For supply of medical and surgical items d d - instrument cabinet , instrument trolley with two glass pans , emergency light , bowel ss , waste paper basket plastic , wash basin , foot operated self closing bin , bowel all size each ss , patients trolley with removable stretcher , tray kidney ss , dressing trolley , fork tuning , forcep artery spencer wells long , forcep artery kochers , forcep dissecting plain , forcep mosquito , forcep sinus 7 inch , forcep dissecting toothed 5 inch , forcep sterilizer moorfield pattern , tongue forceps , knife bp handle , hook blunt double , scissors sharp , scissors curved surgical mayo , sterilizer steam high pressure drum deep , sterilizer steam high pressure drum , sterilizer surgical instrument 17 inchx9. 5 inch , scalpel 2 inch , tape measure linen 5 feet , diagnostic box , tape measure , suction apparatus electric , autoclave , inflatable splint , aluminum alloy portable oxygen cylinder , depressor tongue large and small each , nasal speculum , foreign body removal forceps , tracheotomy set complete adult or child , lens magnifying loupe , shade eye single green latha cloth , shade eye double green latha cloth , test type distance vision chart , test type near vision chart for illiterate , test type distance vision eye chart illiterate , opthalmoscope , splint gooch , thomas splint with person attachment , stick walking , light weight aluminium splint set , forcep vulsellum single or multiple teethed , perforator membrane , scissor episiotomy , aspirator nasal infant manual orelectric

CTN :42919011

09 Dec, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of rc for al bottles and xrf plastic disposable cups lids : :--500 ml aluminium bottle , 1 lit aluminium bottle , 2 lit aluminium bottle , 5 lit aluminium bottle , plastic cap nitrile , xrf plastic disposable cups , xrf plastic disposable lids

CTN :42672824

05 Dec, 2025 NA

Lohit - Arunachal Pradesh

Tender For bid to ras bid to ras supply of isi mark , file triangular 4 inch material high carbon steel with wooden handle with isi mark , file triangular 6 inch material high carbon steel with plastic handle comma hand tools for grinding on glass comma stone comma marble comma rock comma bone and 120 grit with isi mark , file triangular 8 inch with handle material high carbon steel teeth precision cut teeth with isi mark , file triangular 10 inch material high carbon steel with handle with isi mark , file triangular 12 inch material high carbon steel with handle with isi mark , hammer 250 gm hammer dream fort fiber soft touch curved claw hammer curved claw hammer zero pt 25 kg , mason planer or gurmala material mild steel with handle size 5 inch x 10 inch , mason square 12 inch x 8 inch material stainless steel with isi mark , mason trowel 6 inch material iron with wooden handle , mason trowel 8 inch material iron with wooden handle , mason thread good quality material cotton , oil stone 6 inch x 2 inch combination sharping stone 6 inch length 2 inch berth knife sharping stone grey aluminum oxide 120 comma 240 grit , planer electric planer 650w motor max 2 pt 6 mm cutting depth 82 mm planning width lightweight and powerful optimised chip ejection with isi mark , plumbob 6 ozes oblique 170 gm material cast iron , palm router no load speed 33000 rpm voltage 220 dash 240 v power 550 w collet size 6 mm oblique 1 by 4 inch with isi mark , portable arc welding transformer machine alongwith positive cable negative cable , road marking machine , soldering iron with isi mark , sprit level 10 inch long professional durable aluminum frame magnetic spirit level precision tool with easy to read markings from multiple positions , tiles cutter blade 6 inch material steel shape round no of teeth 12 with isi mark , vernier callipers digital measurement range mm 0 dash 152 pt 4 mm resolution mm 0 pt 01 mm accuracy plus or minus 0 pt 03 mm graduation 0 pt 02mm with isi mark , welding safety goggles , wax for all carpenter work , wood cutter machine 5 inch 1400 watt volt 230 dash 5ohz watt 1350 rpm no load amp 2 cutting cap 39mm with isi mark , zig zag machine electric jigsaw 450w 3100 spm 65 mm adjustable stroke rate double insulation variable speed selection lightweight 1 pt 9 kg plus 1 x jigsaw blade and key with isi mark

CTN :43036025

24 Dec, 2025 NA

Dewas - Madhya Pradesh

Tender For tender for purchase parts for repairing departmental generator (water engine and math pump) - peking kit make comment/kirloskar 3-5 hp-, peking kit make comment/kirloskar 5 hp-, head gas kit 76 mm- 3-5 hp-, head gas kit 80 mm- 3-5 hp-, head gas kit 85 mm- 3-5 hp-, head gas kit 87-5 mm- 3-5 hp-, head gas kit 87-5 mm- 3-5 hp-, head gas kit 76 mm- 5 hp-, head gas kit 80 mm- 5 hp-, head gas kit 85 mm- 5 hp-, head gas kit 87-5 mm- 5 hp-, head gas kit 87-5 mm- 5 hp-, silencer mesh 3-5 hp-, silencer mesh 5 hp-, diesel filter body 3 hp-, diesel filter body 5 hp-, diesel filter mesh small, diesel filter mesh large, diesel hose from tank to filter 0-75", glen rope 8 mm-, glen rope 10 mm-, diesel tank lid, diesel tank mesh, clip 0-75", clip 1", diesel tank complete body 5 hp-, diesel tank complete body 3-5 hp-, rocker bird box complete make crompton 3-5 hp-, rocker bird box complete make crompton 5 hp-, rocker bird pin make crompton 3 hp-, rocker bird pin make crompton 5 hp-, oil pipe rocker bird 0-75", d compressor lever make comment 3-5 h-p-, d compressor lever make comment 5 h-p-, 10 no. nut d compressor, head valve spring 3-5 h-p-, head valve spring 5 h-p-, head valve catcher veyser 3-5 h-p-, head valve catcher veyser 5 h-p-, head valve spring, taffit cover packing 3-5 h-p- make comment, taffit cover packing 5 h-p- make comment, rocker cover packing 3-5 h-p- make comment, rocker cover packing 5 h-p- make comment, side plate packing 3-5 h-p-, side plate packing 5 h-p-, air cleaner 3-5 h-p-, air cleaner packing 5 h-p-, water tee packing 3-5 hp-, water tea packing 5 hp-, fuel pump seam 3-5 hp-, fuel pump seam 5 hp-, block seam 80 mm-, block seam 87-5 mm-, accelerator box 3-5 hp-, accelerator box 5 hp-, comment cam shaft bush lock bolt 3-5 hp-, comment cam shaft bush lock bolt 5 hp-, wet spring 3-5 hp-, wet spring 5 hp-, governor rod large 3-5 hp-, governor rod small 3-5 hp-, governor rod large 5 hp-, governor rod small 5 hp-, timing gear large 3-5 hp-, timing gear small 3-5 hp-, timing gear large 5 hp, , timing gear small 5 hp, , timing gear key 3-5 hp, , timing gear key 5 hp, , flywheel key 3-5 hp, , flywheel key 5 hp, , fuel pump body 3-5 hp, , fuel pump body 5 hp, , nozzle mico 639, nozzle body complete mico 369, nozzle vysor copper, nozzle vysor aluminum, h-t- jigger oil timing side 5 hp, h-t- jigger oil timing side 3-5 hp, , oil cyl 150-250-12, frywheel side 200-300-16, rank bearing 5013-49, piston sluice 5 hp, make comment, piston sluice 3-5 hp make comment, piston 5 hp make comment, piston 3-5 hp make comment, piston ring 5 hp make comment, piston ring 3-5 hp make comment, piston slo-over ring rubber 5 hp make comment, piston slo-over ring rubber 3-5 hp make comment, piston lock 5 hp make comment, piston lock 3-5 hp make comment, piston pin 5 hp make comment, piston pin 3-5 hp make comment, station shaft handle 3-5 hp make comment, station shaft handle 5 hp make comment, head walls set 3-5 hp, head walls set 5 hp, head walls guide std 10, 3-5 hp, head walls guide st-d 20, 3-5 h-p-, head wall guide st-d 10, 5 h-p-, head wall guide st-d 20, 5 h-p-, connecting bush copper st-d 10, 5 h-p-, connecting bush copper st-d 20, 5 h-p-, connecting bush copper st-d 10, 3-5 h-p-, connecting bush copper st-d 20, 3-5 h-p-, connecting bush copper st-d 30, 3-5 h-p-, connecting bush copper st-d 30, 3-5 h-p-, c-r- piece copper st-d 10 3-5 h-p-, c-r- piece copper st-d 20 3-5 h-p-, c-r- grinding copper st-d- 30 3-5 h-p-, c-r- grinding copper st-d- 40 3-5 h-p-, c-r- grinding copper st-d- 50 3-5 h-p-, c-r- grinding copper st-d- 60 3-5 h-p-, c-r- grinding copper st-d- 70 3-5 h-p-, c-r- grinding copper st-d- 80 3-5 h-p-, c-r- grinding copper st-d- 90 3-5 h-p-, c-r- grinding copper st-d- 100 3-5 h-p-, c-r- grinding copper st-d- 10 5 h-p-, c-r- grinding copper st-d- 20 5 h-p-, c-r- piece copper st-d- 30 5 h-p-, c-r- piece copper st-d- 40 5 h-p-, c-r- piece copper st-d- 50 5 h-p-, c-r- piece copper st-d- 60 5 h-p-, c-r- piece copper st-d- 70 5 h-p-, c-r- pie

CTN :43036406

18 Dec, 2025 10.00 Lacs

Ganganagar - Rajasthan

Tender For work of providing and fixing open gyms in various parks in the municipal council area (mla lad) - surfing boardproviding and fixing of surfing board of size not less than 1000mm (length) x 600mm (width) x 1400mm (height), to build up the muscle groups of the waist, enhance the body coordination and flexibility. the main structure frame shall be made from g.1. pipe minimum of 80nb "c" class welded with m.s. round base plate atleast 0250 mm & 10mm thick. the footrests shall be made from high quality fiber reinforced plastic material. high tensile steel with galvanized nut bolts shall be used for assembly. the powder coating shall be done with pure polyester powder of ackzonoble berger/ nerolac with minimum 60 to 70 micron thickness, complete in all respect including fixing the m.s. holdfast in cement concrete to hold the whole structure, under the directions of engineer-in charge to fullfil the functional requirement. 1. (the cement concrete and excavation work shall be including.), thai-chi spinner (2 wheel)providing and fixing of thi-chi spinner (2 wheel) of size not less thal 700mm (length) x 1000mm (width) x 1280mm (hight), to increase mobiltiy of shoulder elbow and hip-knee. the main structure frame shall be made from g.i pipe minimum of 80 bn "c" class welded with m.s. round base plate atleast 250mm & 10 mm thick. high tensile s.s. nut bolts shall be used for assembly. the powder casting shall be done with pure plyester powders from ackzonoble/berger/nerolac paint. with 60 to 70 micron thickness, complete in all respect including fixing the m.s. hodfast in cement concrete to hold the whole structure, under the direction of engineer-in-charge to fullfil the functional requirement. 1. (the cement concrete and excavation work shall be including), leg pressproviding and fixing of leg press of size not less than 1840mm (length) x 360mm (width) x 1560mm. (height) to build up the muscles of thigh and enhence the strength of waist. the mian structure frame shall be made from g.i. pipe minimum of 80nb "c" class welded with m.s. roaund base plate atlesat 250mm & 10mm thick. the sleeve frame minimum of 100 od and m.s. seamless pipe with thickness 5mm. this sleeve should be disassembled from main frame. the footrests shall be made from casted aluminum material, having sizes minimum of 130mm x 310mm x 5mm thick. closing caps shall be made up of high quality fiber rainforced plastic material. high tensile steel with galvainzed nuts and bolts shall be used for assembly. the powder casting shall be done with pure plyester powders of ackzonoble/berger/ nerolac with 60 to 70 mircon thickness, complete in all respet including fixing the m.s. holdfast in cement conrete to hold the whole strucute, under the directins of engineer-in-charge to fullfil the functional requirements. 1. (the cement concrete and excavation work shall be including.), double standing twisterproviding and fixing of double twister standing of size not less than 1500mm (length) x 600mm (width) x 1300mm. (height) to enhence flexibility of waist. the main structure frame shall be made from g.i. pipe minimum of 80nb "c" class welded with m.s. roaund base plate atlesat 250mm & 10mm thick. the handle frame is minimum of 25nb shall be made from "c" class g.i. pipe. the twister plate to be fitted on the bottom frame shall be made up of m.s. roaund plate of minimum size 300mm and 10mm thick. closing caps shall be made up of high quality fiber rainforced plastic material. high tensile steel with galvainzed nuts and bolts shall be used for assembly. the powder casting shall be done with pure plyester powders of ackzonoble/berger/ nerolac paint with 60 to 70 mircon thickness, complete in all respet including fixing the m.s. holdfast in cement conrete to hold the whole strucute, under the directins of engineer-in-charge to fullfil the functional requirements. 1. (the cement concrete and excavation work shall be including.), construction of foundation/inaugration pedst

CTN :42842817

10 Dec, 2025 16.90 Lacs

Chhabra - Rajasthan

Tender For corrigendum : supply of spare/accessories items of two nos. multi-purpose fire tender(rj-28ea-0956 and rj-28- ea-0957)against tn-sc-638/2025-26(mm) - high pressure hose reel with 60mm lg x 19 mm ( ) with fog gun and spray type, low pressure hose reel with 19 mm x 50 mm long hose with duel purpose shut off nozzle., extension ladder 10.5 meter, delivery hose 63 mm rubber lined in 30 m length (type b of is 636/79/5) complete with instantaneous coupling., long line 50 mm circumference 30 m long as per is 1084., short line 50 mm circumference 15m length as per is 1084., protective clothing for fireman complete with golves, boots, helmets with suitable face shield mad out of material capable of reflecting at least 95% of radiant heat temperature around 1500 to 2000 degree celsius and also afford some protective against direct flame. the suit will be of sufficient size to accommodate a breathing apparatus to users (item should be packed in hard body box)., fire hook, fire man axe, sledge hammer, carpenter saw, pick axe, celling hook, crow bar made of carbon steel, self contained breathing apparatus (45 min duration compressed air type) complete with spare cylinder & tool kit), dividing breeching, collecting breeching, pvc suction hose heavy duty complete with copper alloy round threaded couplings to suit the pump inlet - 2.5m long., suction strainer for item 2, basket strainer suitable for item 4 , is : 3582, dividing breaching with control arrangement as per is : 5131, collecting breaching as is : 905, hose bandages rubberized is : 5612, hose clamps is : 5612, water curtain nozzle made of m .s .plate with g . m instantaneous connection, branch pipe short ( chromium plated) is : 903, a set nozzle of sizes 12 mm , 16 mm , 20mm , 25 mm and 32 mm ( two each ) ( see is : 903 - 1975 * t ), adapter for 100mm suction female thread and 63mm male instantaneous, adaptor double female instantaneous pattern 63mm ., adaptor double male instantaneous pattern 63mm, hand lamp ( 4cells ), rubber gloves 33kv 1 pair, fire beater, foam pick up tube, rubber gloves as per is 4770 - 1991 for 5000 volts, leather gloves is 6994 1977, jack hydraulic for 20 ton capacity with handle, hand controlled branch for 63 mm size hose coupling, hand held fast action select flow nozzle :-the selectable flow rate multipurpose nozzle should have a multiple flow setting. this product be of light in weight and easy to handle. weight of the nozzle should not be more than 2 kg. the calibrated flow rates are easily selectable through an selection ring. the stream patterns should be changed by rotating the diffuser head ring. nozzle should be having pistol grip, shut off ball valve opening and made of aluminum alloy., bolt cutter 600mm long, shovel with handle, minimum 12v halogen fog & spot lamps, hose ramp

CTN :42772244

22 Dec, 2025 NA

Rupnagar - Punjab

Tender For corrigendum : supply of rate contract of hospital consumables - hospital consumables under edl & jssk (exclusive gst) gst will be charged as applicable, absorbent gauze 90cmx18mtr (gauge absorbent), blade & razor (plastic handle with fitted blade), blood lancets, blood transfusion set (sterilized), crepe bandage 10 cm x 4 mtrs., crepe bandage 15 cm x 4 mtrs., cuffed endotracheal tubes non toxic (size: 5.0mm), cuffed endotracheal tubes non toxic (size: 5.5mm), cuffed endotracheal tubes non toxic (size: 6.0mm), cuffed endotracheal tubes non toxic (size: 6.5mm), cuffed endotracheal tubes non toxic (size: 7.0mm), cuffed endotracheal tubes non toxic (size: 7.5mm), cuffed endotracheal tubes non toxic (size: 8.0mm), dark goggles ( as per specifications), disposable bougies/ endotracheal tube introducer with angled tip adult size 15f x 70cm flexible., disposable mtp plastic suction cannula no. 10, disposable mtp plastic suction cannula no. 6, disposable mtp plastic suction cannula no. 7, disposable mtp plastic suction cannula no. 8, disposable mtp plastic suction cannula no. 9, disposable intubating stylet size large, medium 14f, latex free made of malleable aluminum covered with a plastic sheath., electronic equipment disinfectant spray (each 100gms contains: ethanol 10.0g, 2-propanol 9.0g and 1-propanol 6.0g, feeding tubes (infant) pvc, green eye shield, hypoallergenic paper backing tape size: 25 mm x 9 mtr., hypoallergenic paper backing tape size: 50 mm x 9 mtr., i v set vented with needle, i.v cannula sterile with injection port single use (size : 18g), i.v cannula sterile with injection port single use (size : 20g), i.v cannula sterile with injection port single use (size : 22g), infusion set single use, light weight fiber cast 6 length 3.6 mtr., light weight fiber cast 5 length 3.6 mtr., ot cap disposable surgeon (bouffant cap), sterilized disposables drape sheets ( 120 cm x 210 cm), pvc ryles tube size: fg 10, pvc ryles tube size: fg 12, pvc ryles tube size: fg 14, pvc ryles tube size: fg 16, pvc ryles tube size: fg 18, reinforced endotracheal tube with cuffed no. 7.5, rolled cotton bandage 10 cm x 4mtrs., rolled cotton bandage 15 cm x 4mtrs., rolled cotton bandage 5 cm x 4mtrs., rolled cotton bandage 7.5 cm x 4mtrs., spinal needle disposable sterilized adult as 25 gauze (70-90 mm with hub), spinal needle disposable sterilized adult as 26 gauze (70-90 mm with hub), sterile plastic urine container (50ml), sterile single use reuse prevention syringe ". size 2ml., sterile single use reuse prevention syringe size 5ml. , sterile single use reuse prevention syringe ". size 10ml. , sterile single use reuse prevention syringe , size 3ml., suction cather pvc pre-sterilized, surgical gloves sterilized 6.5" (isi mark), surgical gloves sterilized 7" (isi mark), surgical gloves sterilized 7.5" (isi mark), surgical gloves sterilized 8" (isi mark), cord clamp, disposable oxygen mask (adult) , i.v cannula steile us 24g with port, i.v cannula steile us 24g without port, nasal prongs for oxygen therapy, pedia set, sodium phosphates enema (process procto- clysis) - each 100 ml contains sodium phosphate 8 gm, sod. acid phosphate 10 gm aqueous based, suction catheter 10f, suction catheter 14f, suction catheter 6f, yankauer suction tip, elastic adhesive bandage lonoline free streach nlt 60% size 10 cmx4mtr., 3ml hypodermic syringes with 24g needles( 1.0 inch), (exclusive gst) gst will be charged as applicable, (exclusive gst) gst will be charged as applicable

Aluminium Bottle Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector