Latest aluminium frame Tenders | Government aluminium frame Tenders

CTN :41519449

04 Sep, 2025 NA

Pithoragarh - Uttarakhand

Tender For bid to ras supply of supply of complete structural and contruction material for medical shelter d d - hybrid core insulated fireproof sandwich ceiling panels in min 1100mm width , roof 0 point 60 mm thick ppgi sheet approved colour fixed with self tapping screws over steel purlins , ridge cover 0 point 60 mm thick pre coated corrugated sheet of approved colour matching with the roof sheet of size and design and 3m long and 900 mm wide , wind ties 12000mm long wind ties of 40 x 5mm ms flat on each side of roof will be provided and shall be secured adequately to purlins with self tapping screws and steel and bitumen washers and bolts , door of size 900mm x 2000mm made of powder coated aluminium frame , pvc doors factory made pvc moulded door shutter 30mm thick of size 750 x 1900mm , window powder coated aluminum two track sliding window of size 1200 x 1200 mm with 02 nos of glass shutter and stainless steel fly proof mesh and outside aluminium grill shall be provided , aluminum ventilator powder coated aluminum ventilator fix type of size 900 x 450 mm with stainless steel fly proof mesh shall be provided , acrylic sheet fixed aluminum frame with 6mm thick acrylic sheet glazing 900mm wide will be provided along the entire length of the verandah , sunshade a sunshade of size 1500mm x 500mm for external windows will have iron frame for fixing it to the shelter wall , sunshade b sunshade of size 1200mm x 500mm for external door and ventilatorss will have iron frame for fixing it to the shelter wall , foundation bolt 25mm dia 750mm long welded with top and bottom anchor plate of size 250 x 250 x 10mm and fixed with bottom base plate of column using nuts and bolts , nut bolt of size 12mm dia 75mm long with washer , nut bolt of size 12mm dia 125mm long with washer , nut bolt of size 12mm dia 150mm long with washer , rivet full size , self tapping screw 100 mm long , self tapping screw 75 mm long , star screw 15mm long , star screw 25 mm long , star screw 75mm long , water tank with staging 02 nos of hdpe 500 ltr capacity water tank and 01 nos of staging 3 point 20 mtr height which will be made with ms angle iron , ewc vitreous china wash down water closet cascade type with flushing cistern , wash hand basin vitreous china wash hand basin pedestal type angle back white flat back pedestal pype , bathroom cabinet ptmt cabinet with looking mirror for toiletry items of size 330mm x 140mm x 530mm with arrangements to fix the same with wall , ss soap dish holder , cp towel rail 24 mm dia and 600 mm long with fixing fixing arrangement , stainless steel grating 100mm dia isi marked , stainless steel grating whith hole for waste pipe of whb , cp bib cock 15mm bore long body , cp pillar tap 15 mm bore , cp angle valve chromium plated steel 15 mm bore , cp stop cock chromium plated steel 15mm bore , chromium plated shower rose 100 mm dia , pvc p trap 110mm dia , pvc floor trap 110mm dia , pvc elbow 110mm dia 90 degree angle , pvc elbow 110mm dia 45 degree angle , pvc tee 110mm dia , pvc socket 110mm dia , pvc pipe 75mm dia , ppr pipe 32mm dia and 3 layer pn 16 oblique sdr 7 point 4 , ppr elbow 32mm , ppr tee 32mm , ppr socket 32mm , ppr union 32mm , ppr reducer socket 32 x 20mm , ppr reducer tee 32 x 20mm , ppr reducer elbow 32 x 20mm , ppr tank connector 32mm , ppr gate valve 32mm , ppr pipe 20mm dia and 3 layer , ppr elbow 20mm , ppr threaded elbow 20mm , ppr tee 20mm , ppr threaded tee 20mm , ppr socket 20mm , ppr threaded socket 20mm , steel connection 600mm long with brass check nuts and rubber washers for gyzer , pvc connection 600mm long with brass check nuts and rubber washers for bain and flush //bid details 2 / 94 cistern , pvc solvent cement , teflon tape 12mm wide and 10 mtr long , cgi sheet 3000 x 900 x 0 point 60mm of isi mark , gi pipe 2400mm long and 50 mm dia and 1 point 5mm thick , 20 watt led tube light fitting and 230v with electronic ballasts and holder and connector and block etc , auto rechargable led bulb18 w with modular l

CTN :40703692

04 Sep, 2025 NA

Bangalore - Karnataka

Tender For bid to ras corrigendum : supply of customized work benches and storage systems f f - vertical storage , wall , island , wall mounting , computer , technical drawing analysis , sitting , aluminium frame with glass

CTN :41642408

15 Sep, 2025 NA

Kathua - Jammu And Kashmir

Tender For supply of fabrication - 13 ft x 2 ft 6 inch x 16 inch aluminium frame with acp sheet handle , 10 ft x 16 inch x 30 inch aluminium frame acp sheet handle , 10 ft x 36 inch x 16 inch down side aluminum frame 5 ft x 2 ft , pvc sheet 13 ft x 2 ft , pvc sheet 10 ft x 2 ft

CTN :41642916

15 Sep, 2025 NA

Kathua - Jammu And Kashmir

Tender For supply of fabrication : :-- upward frame 21 ft x 2 ft 6 inch x 1 ft 6 inch pvc fitted 21 ft x 2 ft 6 inch including aluminium frame acp sheet , pvc sheet 21 ft x 2 ft , pvc sheet 3 ft x 2 ft , working table in between aluminium panel size 12 ft x 2 ft x 2 ft 6 inch , both side 2 storage drawer with centre partition 2 keyboard , tray with telescope channel all work completed with 19 mm plyboard and zero point 8 mm sunmica sheet

CTN :41627851

08 Sep, 2025 NA

Bharatpur - Rajasthan

Tender For supply of plastics bib taps pillar taps angle valves and stop valves as per is 9763:2000 (latest) (q3) , connection pipe with nuts (v2) (q3) , water fittings - copper alloy float valves (horizontal plunger type) as per is: 1703 (q4) , flushing cistern (q3) , bathroom water shower (v2) (q3) , floor drain traps (q3) , towel rail / ring for bathroom (q3) , waste fittings for washbasin and sinks as per is 2963 (q3) , waste pipe (q3) , pvc male adapter , pvc female adapter , pvc water tank lid multipurpose , pvc lid 500 ltr , pvc lid 700 ltr , pvc lid 1000 ltr , pvc lid 2000 ltr , pvc cistern short bend , pvc cistern long bend , pvc toilet seat cover , pvc waste coupling 38 or 40mm , pvc swr bend 110mm , swr pipe 75 mm 6m , swr pipe 110 mm 3m , swr pipe 110 mm 6m , swr tee 110 mm plain , clip for swr pipe 110mm , cpvc tee 20mm , cpvc socket 20mm , cpvc socket internal thread 20mm , cpvc elbow 20mm , bathroom cabinet mirror 350mm x 450mm , bathroom cabinet mirror 622mm x 422mm , corner glass shelf 9 x 9 inch , corner glass shelf , looking mirror with aluminium frame , looking mirror with pvc frame , glass shelf 18 inches , acrylic corner shelf ) /bid number : gem/2025/b/6596250 * /dated: 29-08-2025 & & / bid document 1 / 63

State Government

CTN :41365007

08 Sep, 2025 NA

Phaltan - Maharashtra

Tender For supply of installation, commissioning and testing of canning line 0.5 tph - supply of installation, commissioning & testing of canning line 0.5 tph., exhaust box it consists off ss 304-the tunnel type steam exhauster suitable for exhausting of cans-pursed inside the trough to heat the can up to required temperature ss 304 wire mesh type belt-conveyor belt width 500mm-conveyor frame is made in ss304 square pipe 40mm x 40mm-top and bottom cover is provided and length of exhauster 5500mm-one steam header with inlet and drain connection is provided-temperature indicators with control and temperature sensor is provided-variable frequency drive (vfd) is provided for control the speed of belt-geared motor is provided 2 hp-body in 2mm thickness-gear box and motor mounting plate 5mm-belt guides -30mm x 5mm, vertical tank retorts -vessel size -600mm diameter x 900mmh-door manually top opening-capacity 200 bottles-basket loading and unloading manually-size of bottle 46mmx46mmx210mm-automatic digital temperature controller system and pressure control-provide safety valve, air vent valve, pressure gauge and digital temperate gauge-connections water inlet, drain, round retort baskets-ms round crates-diameter -500mm x 400mm, tilting kettle steam jacketed kettle (tilting type)-500 lit equipment consists of:-ss 304 cylindrical body with bottom hemispherical portion-the bottom hemispherical portion will have ss jacket for steam heating-ss supporting legs with mounting pad-steam inlet, outlet with steam trap, safety valve, air vent& drain connections-water holding capacity 500 lits-steam requirement 100 kg per batch at 3 kg/cm2-manually tilting arrangement by hand wheel, media preparation kettle- 500 lit -ss 304 cylindrical body with bottom hemispherical portion-the bottom hemispherical portion will have ss jacket for steam heating-ss supporting legs with mounting pad-stirrer arrangement with ptfe scrapers, shaft & supporting tripod-fixed speed drive for stirrer shaft-steam inlet, outlet & drain connections-holding capacity 500 lits-electric power requirement = 02 hp for stirrer shaft-steam requirement 100 kg per batch at 3 kg/cm2-body in 5mm thickness, ss tables -ss 304 table top and size 2500mmx600mm x 800mm height-four legs are provided in square tubes and 30x30mm-can size cut out body in 1.5mm, ds 24 seamer -capacity 30-40 high speed cans per minute.-can still type seamer suitable for seaming cans between 100 - 700 dia range.-sturdily built & very robust construction.-complete body of graded cast iron.-seaming operation is fully automatic after the can is placed & pedal is pushed.-the can is stationary while the seaming head with roller rotates, thus seaming the can hermetically.-change parts comprising of seaming rollers, can slide can -guide and seaming chucks for to suit your 401 changeparts [ 850 gm]-electicals:2 hp 930 rpm motor, switchgear, starter, (suitable for operation of 400 v 5% 3 phase 50 cycles supply) pulley, v-belt, cables, conduits and fittings toolkit, gantry from retort to cooling tank - ms structure, hoist lifting crane -500kg double wire rope typecap- 500kgpower-1hp, hoist trolly -trolley cap-500kg-trolley with track for movement, hydraulic trolly-pallet material movement hydraulic trolley, steam line with all valves with aluminum cladding -steam pipeline 40mm and 25mm-valves, bend, flange etc-aluminum cladding, can sterilizer -the tunnel type steam sterilizer suitable for sterilizing of cans-all the bottom of trough one steam connection is provided the steam is directly-pursed inside the trough to heat the can up to required temperature-ss wire type belt is provided for carrying can and width-300 mm-conveyor frame is made in ss square pipe-top and bottom cover is provided and length- 10 feet-one steam header with inlet and drain connection is provided wire mesh opening 5 mm and diameter- 1.6mm, temperature indicates and temperature sensor is provided, geared motor-01 hp, hand can tester -can test

CTN :41622290

18 Sep, 2025 20.00 Lacs

Multi City - Multi State

Tender For supply of excavation of earth , lean concrete for foundation , reinforcement tmt bar for foundation , ms plate for base and top qty 36 , nut and bolt with washer with fixing in rcc pillar , ms pipe heavy duty with gusset plate qty 18 , ms channel 75mm wide used for vertical portion , pp galvanized sheets including ridge , foundation , steel roof truss qty 08 truss , pp weld mesh , aluminum glass slider windows with mesh , steel door with frame , led flood lights with ancillaries including cabling, mcb with box etc , two coats of synthetic enamel over one coat of red oxide primer

CTN :41568443

15 Sep, 2025 NA

Gautam Budnagar - Uttar Pradesh

Tender For providing and fixing aluminium frame work partition and repairs to aluminium door and windows

CTN :41424634

05 Sep, 2025 NA

Doda - Jammu And Kashmir

Tender For corrigendum : supply of dust proof composite panel with aluminium frames for tech sec , aluminium strips for tech sec , aluminium door for tech sec , dust proof glass partitioning for tech sec , nylon plug with fixing screws , rubber beading for dust proof glass and door

Central Government And Public Sector

CTN :41513994

04 Sep, 2025 NA

Nagpur - Maharashtra

Tender For supply of file straw board to size- 23cm x 35 cm ( [file straw board to size- 23cm x 35 cm (+/- 1 cm) with 8 cm clear spines excluding pasting portion of the flap along with 2 nos of transparent perplex sheet of size- 150mmx25mmx2mm with 2 holes centrally punched with 7.9cm distance between the hole. file material is of 2.5 mm to 3mm thick straw board. binding cloth to be pasted on all the edges of each flap in apportion of 20 mm & also on the middle portion of both parts , spines at centre joint space in a width of 14-15cm along the length of file. file should be punched & eyeleted with 4 nos aluminum eyelets- two on each flap at a distance of 1.5cm to 2 cm from the left edge of each flap. 2 nos of good quality cotton tag/lace of length approx 60 cm & dia 3-4 mm to be inserted in the tag holes. one(1) cotton tape of 100 cm x (12-15)mm width x 2mm thickness should be inserted throughout the two inners made at the middle portion of backside of the file cover. binding cloth is to be of good quality & color should be dark blue.]

Aluminium Frame Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector