Latest aluminium ingot Tenders | Government aluminium ingot Tenders

CTN :41488805

04 Sep, 2025 NA

Kamrup - Assam

Tender For corrigendum : supply of replacement of existing 04 x window transparent glass including aluminum frame of kitchen bainet of rpl no 05 of size 1 ft x 1 ft and thick 4 mm. , replacement of existing of toilet outlet ms iron pipe elbow and bend type of sbs of master cabin of rpl no 05 of size 2 ft and dia 3 inch. , replacement of existing accelerator throttle of sbs and pbs as per existing specification with 20 mtr swr thick 4 mm of rpl no 05 , replacement of 12 x ss hinges of engine cover of rpl no 05 as per existing specification. , repair and cleaning work of sbs and pbs radiator of rpl no 05 to be required. , supply and fixing of iron cover for sbs and pbs radiator of rpl no 05 of size 3 ft 4 inch x 3 ft and thick 1 mm inclusive all charges. , replacement of existing 02 x iron plate of out side of sbs and pbs toilet of rpl no 10 of size 1 ft x 6 ft and thick 6 mm. , replacement of existing toilet outlet ms iron pipe elbow and bend type of sbs of master cabin of rpl no 10 of size 2 ft and dia 3 inch inclusive all charges. , replacement of existing accelerator throttle of sbs and pbs as per existing specification with 20 mtr swr thick 4 mm of rpl no 10 , replacement of existing transparent glass of wheel house of size 41 inch x 18 inch 2 nos with aluminum frame and 63 inch x 18 inch 1 no and driver cabin. , repair maint of existing oil tank of davit of rpl no 10 to be required. , servicing and balancing remetalling of alternator shaft of aux engine to be required and replacement of pully of aux engine as per sample of rpl no 10 inclusive all charges. , replacement of existing bracket of sukhan shaft of pbs main engine of rpl no 10 as per existing specification. ) /bid number : gem/2025/b/6582013 * /dated: 18-08-2025 & & / bid document 1 / 13

CTN :41628159

08 Sep, 2025 2.00 Lacs

Ranchi - Jharkhand

Tender For supply of solar panels 5 x 375 w monocrystalline or mono panels 1.875kw , inverter type maximum power point tracking base hybrid inverter supports solar grid and battery , inverter capacity 2 kva oblique 24v mppt converter 96 plus efficiency , battery 02 x 12v comma 150 ah tubular lead acid batteries oblique 01 x 24 v valve regulated lead acid battery , mounting structure adequate gi oblique aluminum adjustable frame for mono panels , wiring kit 6 sq mm solar dc cable comma mc4 connectors comma conduit mcbs comma spd , daily energy output 7 unit day , battery backup 8 hours minimum aur maximum load support 1500w , battery charging time 6 hours maximum , installation charges

State Government

CTN :41365007

08 Sep, 2025 NA

Phaltan - Maharashtra

Tender For supply of installation, commissioning and testing of canning line 0.5 tph - supply of installation, commissioning & testing of canning line 0.5 tph., exhaust box it consists off ss 304-the tunnel type steam exhauster suitable for exhausting of cans-pursed inside the trough to heat the can up to required temperature ss 304 wire mesh type belt-conveyor belt width 500mm-conveyor frame is made in ss304 square pipe 40mm x 40mm-top and bottom cover is provided and length of exhauster 5500mm-one steam header with inlet and drain connection is provided-temperature indicators with control and temperature sensor is provided-variable frequency drive (vfd) is provided for control the speed of belt-geared motor is provided 2 hp-body in 2mm thickness-gear box and motor mounting plate 5mm-belt guides -30mm x 5mm, vertical tank retorts -vessel size -600mm diameter x 900mmh-door manually top opening-capacity 200 bottles-basket loading and unloading manually-size of bottle 46mmx46mmx210mm-automatic digital temperature controller system and pressure control-provide safety valve, air vent valve, pressure gauge and digital temperate gauge-connections water inlet, drain, round retort baskets-ms round crates-diameter -500mm x 400mm, tilting kettle steam jacketed kettle (tilting type)-500 lit equipment consists of:-ss 304 cylindrical body with bottom hemispherical portion-the bottom hemispherical portion will have ss jacket for steam heating-ss supporting legs with mounting pad-steam inlet, outlet with steam trap, safety valve, air vent& drain connections-water holding capacity 500 lits-steam requirement 100 kg per batch at 3 kg/cm2-manually tilting arrangement by hand wheel, media preparation kettle- 500 lit -ss 304 cylindrical body with bottom hemispherical portion-the bottom hemispherical portion will have ss jacket for steam heating-ss supporting legs with mounting pad-stirrer arrangement with ptfe scrapers, shaft & supporting tripod-fixed speed drive for stirrer shaft-steam inlet, outlet & drain connections-holding capacity 500 lits-electric power requirement = 02 hp for stirrer shaft-steam requirement 100 kg per batch at 3 kg/cm2-body in 5mm thickness, ss tables -ss 304 table top and size 2500mmx600mm x 800mm height-four legs are provided in square tubes and 30x30mm-can size cut out body in 1.5mm, ds 24 seamer -capacity 30-40 high speed cans per minute.-can still type seamer suitable for seaming cans between 100 - 700 dia range.-sturdily built & very robust construction.-complete body of graded cast iron.-seaming operation is fully automatic after the can is placed & pedal is pushed.-the can is stationary while the seaming head with roller rotates, thus seaming the can hermetically.-change parts comprising of seaming rollers, can slide can -guide and seaming chucks for to suit your 401 changeparts [ 850 gm]-electicals:2 hp 930 rpm motor, switchgear, starter, (suitable for operation of 400 v 5% 3 phase 50 cycles supply) pulley, v-belt, cables, conduits and fittings toolkit, gantry from retort to cooling tank - ms structure, hoist lifting crane -500kg double wire rope typecap- 500kgpower-1hp, hoist trolly -trolley cap-500kg-trolley with track for movement, hydraulic trolly-pallet material movement hydraulic trolley, steam line with all valves with aluminum cladding -steam pipeline 40mm and 25mm-valves, bend, flange etc-aluminum cladding, can sterilizer -the tunnel type steam sterilizer suitable for sterilizing of cans-all the bottom of trough one steam connection is provided the steam is directly-pursed inside the trough to heat the can up to required temperature-ss wire type belt is provided for carrying can and width-300 mm-conveyor frame is made in ss square pipe-top and bottom cover is provided and length- 10 feet-one steam header with inlet and drain connection is provided wire mesh opening 5 mm and diameter- 1.6mm, temperature indicates and temperature sensor is provided, geared motor-01 hp, hand can tester -can test

CTN :41602471

06 Sep, 2025 NA

Jodhpur - Rajasthan

Tender For supply of aluminum frame , glasses , tin roofing sheet and iron stand , aluminum grill , floor and wall tiles , wall with bricks , fitting accessories and labour charges

CTN :41618708

08 Sep, 2025 NA

Multi City - Multi State

Tender For tender for supply of vertical band saw machine for saw mill , vtools 20 inch 58 ccas per spcn , freud random orbit sander/polisher kit 220 v , 12 inch wood cutting machine 2hp power 75mm cutting capacity , digital craft 200w sander polishing machine with hand sanding block & pincer pliers new 7.2 inch random orbital sander , bosch grs 190 handled wood cutter as per spcn , bosch gst 650 jigsaw pistol grip drill as per spcn , voltz wood lathe as per spcn , bosch gws 700-100 angle grinder as per spcn , bosch ghu 26-82d professional coded planner as per spcn , bosch gof 130 corded electric router , polishing standing velcro backup with 10 spindle adaptor lock nut for drill pad with 6 holes and hairy surface for pneumatic as per spcn , aluminum alloy triangular ruler square 7inch , 5 inch sanding pad , bevel 6 inch combination square , 10 inch metal iron sheet tin snips cutting , flat file tool as per spcn , rs pro 200mm , bastard , rasp cut , half round , handmade noki randa , carpenter t-bar sash clamp as per spcn , combination stone , golden basula as per spcn , chisel , fiber sand disc angle grinder 125mm as per spcn , harden 500grm professional machinist hammer with wood handle , bevel chisel set as per spcn , saw cutter , aasons stainless steel 300mm adjustable engineer rule right angle combination square , measuring tap as per spcn , hand saw , glass cutter , drill bit , router bit , drilling bits for wood , metal and plastic , angle 11 pieces saw , twisted and flat bit set 13 pcs wood drill bit , screw driver , pincer pliers heavy duty lineman pliers as per spcn , jack plane std 6 no. metal hand plane as per spcn , hand saw 12 inch with frame

CTN :41622290

18 Sep, 2025 20.00 Lacs

Multi City - Multi State

Tender For supply of excavation of earth , lean concrete for foundation , reinforcement tmt bar for foundation , ms plate for base and top qty 36 , nut and bolt with washer with fixing in rcc pillar , ms pipe heavy duty with gusset plate qty 18 , ms channel 75mm wide used for vertical portion , pp galvanized sheets including ridge , foundation , steel roof truss qty 08 truss , pp weld mesh , aluminum glass slider windows with mesh , steel door with frame , led flood lights with ancillaries including cabling, mcb with box etc , two coats of synthetic enamel over one coat of red oxide primer

CTN :41569292

15 Sep, 2025 18.50 Lacs

Kupwara - Jammu And Kashmir

Tender For supply of composite multi layer pipe of size inner dia 25mm and outer dia 32mm as per tech spec , gi tank nipple 25mm 6 inch with check nut and washer , ppr elbow 32mm , ppr socket 32mm , ppr equal union inner dia 25mm and outer dia 32mm , ppr end cap 32mm dia suitable for 32mm outer dia , ppr connector 32mm dia suitable for 32 or 25mm outer dia pipe , ppr tee 32mm dia suitable for 32mm outer dia pipe , ppr reducer 32mm dia suitable for 32mm outer dia pipe , gi nipple 25mm 3 inch long , m seal 100 gm each pkt , cotton thread 100m long , bib cock brass 15mm , gi nipple 25mm 4 inch long , gi nipple 25mm 6 inch long , gi equal union inner dia 25mm and outer dia 32mm , gi tee 25mm , gi tee 15mm , gi socket 25mm , gate valve brass gun metal 25mm dia , gi pipe 15 mm dia med grade , gi pipe 20 mm dia med grade , gi reducer 25mm to 15mm , gi elbow 25mm , gi elbow 15mm , gi nipple 15mm 4 inch long , gi nipple 15mm 6 inch long , gi socket 15mm , gi union 15mm , gi union 25mm , gi plug 25mm , gi plug 15mm , tmt anchor pins to secure cml pipe at 10m distance , triplex plunger pump of 7.5 hp at 550 rpm with discharge capacity of 46 lpm as per tech spec , triplex plunger pump of 5 hp at 450 rpm with discharge capacity of 38 lpm as per tech spec , pre fabricated pump shed of size 2.4m x 2.4m and height 1.8m at front side and 1.60 m at rear side as per drg att , rotational moulded polyethylene water storage tanks 5000 ltrs tripple layer , quick setting compound rapidite , m sand find sand free from moisture organic matter confirming to is 383-1970 , aggregate 20mm conforming to is 383-1970 , aggregate 40mm conforming to is 383-1970 , common building burnt clay bricks sub class b of size 23cm x 11.5cm x 7.5cm conforming to is 1077 -1986 , hdpe sand bag laminated off size 75x40cm sand colour and each bag having weight not less than 60gms , tasla iron 18 inch , mason trowel or karchi , plaster trowel with hard wooden handle , showel with wooden handle , brick hammer 1.2 kgs , multipurpose non slip rubber gloves make safeyura esab jupiter seamless , adjustable spanner 12 inch , hacksaw frame with 2 blade , fawda with wooden handle , pipe wrench 12 inch , pipe wrench 18 inch , crowbar 25mm 5 ft long , aluminimum spirit level 6 inch , brick line , rammer with wooden handle wt 5 kg , spanner adjustable 18 inch , iron sheet cutting machine , sheet cutting blade , plumbing dye set 25-50 mm , hacksaw frame blade double end , brick trowel steel 305 mm with handle. , plaster trowel with hard wooden handle isi marked. , galvanised iron pan mortar tasla 16 gauge 16 inch dia minimum weight of 1.5 kg , showel square nose 14 gauge tata high carbon steel, product code svl 022 , brick hammer 1.2kgs , mason trowel karchi , picks axes with chiesel and point endnominal weight 3.0 kg length 595 mm with hard wooden handle , phowrah with hard wooden handles with min weight 2.00 kgs , crowbar 25mm 5 ft long , rammer with wooden handle of wt 510 lbs , aluminum spirit level 6 inch , industrial safety helmet ratcht colour orange or yellow make shelcom melcom akiton , spectacles, frameless with 99.9 percentage uv protected polycarbonate clear lens , hand glove pairs having hppe cut 4 liner 13 gauge with black pu coating make karam super safety , reflective vest make shelcom, melcom , akiton , rain poncho camouflage pattern makeshalimaar or equivalent. , mega phone am215m make ahuja equivalent , gum boot make hilson velsafe wth //bid details 2 / 53

CTN :41587957

05 Sep, 2025 50.0 Thousand

Jammu - Jammu And Kashmir

Tender For supply of aluminum frame with fitments , 1.5 mm wire roll , switch , insulation tape 0.5 inch , electric board , regulator , nail battan , stabilizer 4 kva , surface light 24 watt

CTN :41588752

05 Sep, 2025 NA

Ranga Reddy-T - Telangana

Tender For supply of commercial cpvc pipe fittings (q3) , waste fittings for washbasin and sinks as per is 2963 (q3) , chlorinated polyvinyl chloride (cpvc) pipes for potable hot and cold water distribution supplies (v2) as per is 15778 (q3) , hydraulically regulated door closers (q3) , stainless steel sinks for domestic purposes (v3) as per is 13983 (q2) , floor drain traps (q3) , plastics bib taps pillar taps angle valves and stop valves as per is 9763:2000 (latest) (q3) , towel rail / ring for bathroom (q3) , connection pipe with nuts (v2) (q3) , toilet seat covers (v2) (q4) , hasps and staples as per is 363 (q3) , stainless steel butt hinges as per is 12817 (q3) , door handles as per is 208 (q4) , pvc gitti (q3) , curtain pipe, sider and mounting bracket (q4) , m - seal as per is 9197 (q3) , taflon tape as per is 14635 (q3) , ptmt tap fitting (q3) , pvc pipe 40mm , upvc tee 75mm dia , upvc tee 75mm diameter , concealed stop cock spindle no.-03. , concealed stop cock spindle no.-04 , concealed stop cock spindle no.-05 , cp brass waste coupling 40 mm . , cp brasstoilet paper holder flip type , cp brass jet spray with 1.0 mtr tube , stainless steel grating round 5 inches , grating dome 150 mm , ptmt waste coupling 31 or 32 mm . , ptmt waste coupling 38 or 40 mm. , pvc sink waste coupling 100mm dia , pvc internal fitting for low level cistern , urinal waste pipe 32mmx750mm , pvc urinal waste pipe 31 or 32 mm x 800 mm , pvc waste pipe 32 x 800 mm spring type for whb , pvc waste pipe for whb 32 x 1150 mm , corrugated waste pipe 31 or 32mm x 800 mm . , corrugated waste pipe 38 or 40mm x 800 mm . , ptmt grating round 125 mm with hole . , ptmt grating round 125 mm without hole . , ptmt pillar cock fancy roman handle , ptmt pillar cock fancy type , ptmt push cock 15mm short body , ptmt jet spray with 1.00 mtr tube. , ptmt alloy cabinet mirror , ptmt bib cock fancy , ptmt float valve size 15 mm , ptmt float valve size 20 mm , ptmt float valve size 25 mm , rubber-based adhesives , solvant cement adhesive , stainless steel bow handle , door handle aluminum 200mm , bow handle aluminium 75mm , bow handle aluminium 100mm , bow handle aluminium 150mm , stainless steel handle 75mm , stainless steel handle 200mm , stainless steel plate rack , pvc tank cover , door stopper 50 mm alumnium , door stopper 4 inch , ms door stopper , ms sliding door bolt 250mm , tower bolt stainless steel 100mm , tower bolt stainless steel 125mm , tower bolt stainless steel 150mm , tower bolt stainless steel 200mm , sliding door bolt stainless steel 250mm , sliding door bolt stainless steel 300mm , sliding door bolt aluminum 250mm , sliding door bolt aluminum 300mm , bracket for curtain rod of size 25mm diameter , bracket for curtain rod of size 20mm diameter , powder coated ms corner l-brackets , ss wire mesh , aluminium wire mesh , aluminium plain sheet , float glass , frosted glass , glass pane ordinary transparent sheet , glass pin headed , corner glass shelf , glass shelf with brass bracket , mirror cabinet , mirror for bathroom with ptmt frame , looking mirror as per mes drawing , glazed grade linseed oil putty , helical spring //bid details 2 / 120

CTN :41066678

29 Aug, 2025 2.92 Crore

Nagpur - Maharashtra

Tender For corrigendum : supply of primary aluminium ingots with minimum aluminium content of 99.7% grade-1 to specn. is: 2590-1987 cas

Aluminium Ingot Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government